Home Audio
Showing 73–96 of 159 results
-
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP FF-15
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grille included
Specifications
- Power Output: 1000 Watts Peak
- Amplifier Class: Class D
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Nominal Impedance: Dual 4-Ohm
- Voice Coil Diameter: 3″ (76mm)
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 66.74 lbs (30.27 kgs)
Other Information
Model: MiniMe DSP FF-15
EAN: 0689759001942
Priced and sold by the pieceSKU: MiniMe DSP FF-15 -
Home Audio, Open Box
MiniMe DSP FF-15 (Open-Box)
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grille included
Specifications
- Power Output: 1000 Watts Peak
- Amplifier Class: Class D
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Nominal Impedance: Dual 4-Ohm
- Voice Coil Diameter: 3″ (76mm)
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 66.74 lbs (30.27 kgs)
Other Information
Model: MiniMe DSP FF-15
EAN: 0689759001942
Priced and sold by the pieceSKU: MiniMe DSP FF-15 (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-10
Specifications
- Built-in 600W high-efficiency Earthquake Class D amplifier
- 10″ long throw premium active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- 10″ mass-tuned SLAPS patented passive radiator system
- DSP control through a mobile app
- Frequency Response: 20Hz–135Hz
- Crossover Frequency: 40Hz–160Hz
- Auto signal sensing
- Auto room correction
- Turn-on & Stand-by Mode
- Sub-harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED indicator
- Low level RCA inputs and outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Dimensions
- H x W x D: 12.5″ (318mm) x 14″ (355mm) x 12.25″ (312mm)
- Weight: 30 lbs (13.6 kgs)
Other Information
Model: MiniMe DSP P-10
EAN: 0689759001805
Priced and sold by the pieceSKU: MiniMe DSP P-10 -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-12
Specifications
- Built-in 600W high-efficiency Earthquake Class D amplifier
- 12″ long throw premium active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- 12″ mass-tuned SLAPS patented passive radiator system
- DSP control through a mobile app
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Auto signal sensing
- Auto room correction
- Turn-on & Stand-by Mode
- Sub-harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED indicator
- Low level RCA inputs and outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Dimensions
- H x W x D: 15.25″ (388mm) x 17.25″ (437mm) x 15″ (382mm)
- Weight: 41 lbs (18.6 kgs)
Other Information
Model: MiniMe DSP P-12
EAN: 0689759001812
Priced and sold by the pieceSKU: MiniMe DSP P-12 -
Home Audio, Open Box
MiniMe DSP P-12 (Open-Box)
Specifications
- Built-in 600W high-efficiency Class D amplifier
- 12″ long-throw premium quality driver
- 12″ mass-tuned slaps patented passive radiator system
- DSP control through a mobile app
- Frequency response: 18Hz–115Hz
- Automatic signal-sensing
- Auto room correction
- Turn-on & standby mode
- SHS (sub-harmonic synthesizer)
- Selective variable crossover
- Sub operation switch for different ranges
- Operation status LED light
- Low level RCA inputs
- Mono DSP RCA outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Product Dims
- Height: 15.25″ (388mm)
- Width: 17.25″ (437mm)
- Depth: 15″ (382mm)
- Includes feet, grilles, and amplifier protrusions
Note
This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiniMe DSP P12 (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-15
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- 15″ patented SLAPS-15v2 passive radiator system
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grilles included
Specifications
- Built-in high-efficiency Class D amplifier
- 1000 Watts MAX
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Dual 3″ (76mm) diameter Kapton voice coil
- Nominal Impedance: Dual 4 Ohm
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 75 lbs (34 kgs)
Other Information
Model: MiniMe DSP P-15
EAN: 0689759001935
Priced and sold by the pieceSKU: MiniMe DSP P15 -
Home Audio, Open Box
MiniMe DSP P10 (Open-Box)
Specifications
- Built-in 600W high-efficiency Class D amplifier
- 10″ long-throw premium quality driver
- 10″ mass-tuned slaps patented passive radiator system
- DSP control through a mobile app
- Frequency response: 20Hz–135Hz
- Automatic signal-sensing
- Auto room correction
- Turn-on & standby mode
- SHS (sub-harmonic synthesizer)
- Selective variable crossover
- Sub operation switch for different ranges
- Operation status LED light
- Low level RCA inputs
- Mono DSP RCA outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Dimensions
- Height: 12.5″ (318mm)
- Width: 14″ (355mm)
- Depth: 12.25″ (312mm)
- Includes feet, grilles, and amplifier protrusions
Other Information
Model: MiniMe DSP P-10
UPC: 0689759001805
Priced and sold by the pieceSKU: MiniMe DSP P10 (B-Stock) -
Home Audio, Open Box
MiniMe DSP P15 (Open-Box)
Specifications
- Built-in 1000 Watts MAX High Efficiency Class “D” Amplifier
- 15″ Long Throw Premium Active Driver
- 15″ Patented SLAPS-15v2 Passive Radiator System
- Dual 3″ (76mm) diameter Kapton voice coil
- DSP Control Through Mobile App
- Nominal Impedance: Dual 4-ohm
- Frequency Response: 18–115Hz
- Crossover Frequency: 40–160Hz
- 0–180° Phase Adjustment Switch
- Automatic Signal-Sensing
- Auto Room Correction (iWoofer™ Pro only)
- 3-Way Auto/On/Off Mode Switch
- DSP On/Off Selector Switch
- XLR and RCA Input Selector Switch
- SHS (Sub-harmonic Synthesizer)
- Selective Variable Crossover
- Sub Operation Switch For Different Ranges
- Operation Status LED Light
- Low Level RCA Inputs and Outputs
- Fully Balanced XLR input
- Mono DSP XLR Output
- Remote & Remote eye Included
- Grilles Included
- High Gloss Black Piano Lacquer Finish
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 75 lbs (34 kgs)
SKU: MiniMe DSP P15 (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P63B
Ultra-Compact Powered Subwoofer with Digital Signal Processing
The Earthquake MiniMe DSP P63 subwoofer is a groundbreaking powerhouse that merges innovative design and state-of-the-art technology to provide an outstanding audio experience. Redefining possibilities in a small size, this subwoofer boasts a sleek, compact enclosure design, high peak power, and advanced features such as digital signal processing (DSP). Equipped with a 6.5-inch inverted active driver and dual opposing 6.5-inch passive bass radiators, all housed in a sleek 9-inch cubed enclosure, the MiniMe DSP P63 showcases a patented design that enhances performance by increasing sound-radiating surface area and system efficiency. The MiniMe DSP P63 provides clean, impactful bass without sacrificing valuable floor space.
SKU: MINIME DSP P63B -
Home Audio, Open Box
MiniMe DSP P63B (Open-Box)
Features
- Micro form factor allows for a variety of placement options
- Modern grille-less design offers a high aesthetic acceptance factor
- 3x the radiating surface area for impactful bass response
- Built-in advanced Earthquake class D amplifier for high output and efficiency
- Single inverted 6.5″ active driver with patented edge overlapping suspension
- Dual inverted opposing passive radiators with patented edge overlapping suspension
- Extends low-frequency response
- Anti-wobble cone construction and reinforced dust caps
- Multi-path Optocoupler Protection Circuitry
- Full DSP control through a mobile app
- Auto Room Correction (iWoofer™ Pro only)
- Sub-Harmonic Synthesizer (SHS)
- Up to 25 bands of parametric EQ
- On The Fly Variable Q EQ
- Variable low pass filter
- Low-level RCA inputs
- 0–180° phase adjustment control
- 3-way Auto/On/Off mode switch
- Automatic signal-sensing
- DSP On/Off selector switch
- Volume Control
- Power, signal, and DSP LED indicators
- Built-in 5.2V USB power port
- Can be used with SWAT-2.4X Stereo Wireless Audio Transceiver
- Rubber stabilizing feet
- 110V/220V AC selector
- High gloss black piano lacquer finish
- Protected by US Patent #11,140,474 B1
Specifications
- Amplifier Power:
- 600 Watts MAX
- Driver Size:
- Single 6.5″ active driver with edge overlapping suspension
- Dual opposing 6.5″ passive bass radiators with edge overlapping suspension
- Enclosure Type: Dual passive tuned to 27Hz
- Frequency Response: 30Hz–160Hz
- Crossover Frequency: 40Hz–180Hz
- Nominal Impedance: 4 Ohm
Dimensions
- HxWxD: 8.75″ (222mm) x 8.75″ (222mm) x 9″ (229mm)
- Weight: 13.84 lbs (6.27 kgs)
Other Information
Model: MiniMe DSP P63B
UPC: 0689759002406
Priced and sold by the piecePLEASE NOTE: This item is an open-box item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MINIME DSP P63B (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P8B
Features
- Small form factor with a 10-inch cubed enclosure
- Built-in high-efficiency Class D amplifier
- Premium 8″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Redesigned 8″ mass-tuned SLAPS-M8 passive radiator system
- Double the radiating surface for an impactful response
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Multi-path optocoupler protection circuitry
- Automatic signal sensing
- Auto room correction (iWoofer™ Pro only)
- 3-Way Auto/On/Off mode switch
- DSP On/Off selector switch
- SHS (Sub-harmonic Synthesizer)
- Selective variable crossover
- 0–180° phase adjustment
- Operation status LED indicator
- Low-level RCA inputs
- RCA Mono DSP output
- Remote & remote eye included
- Removable grilles included
- High gloss black piano lacquer finish
Specifications
- Driver Size:
- 8″ active driver
- 8″ SLAPS passive radiator (Tuned to 27Hz with 160g added mass)
- Amplifier Power:
- 300 WRMS / 600W peak dynamic
- Frequency Response: 25–160Hz
- Crossover Frequency: 40–160Hz
- Nominal Impedance: 8-Ohm
- Input Impedance: 20 kOhm
- Enclosure Type: Ported with passive radiator
Dimensions
- H x W x D: 11ʺ (278mm) x 10.43ʺ (265mm) x 11.41ʺ (290mm)
- Weight: 18.2 lbs (8.25 kgs)
Other Information
Model: MiniMe DSP P8B
EAN: 0689759002383
Priced and sold by the pieceSKU: MiniMe DSP P8B -
Home Audio, Open Box
MiniMe DSP P8B (Open-Box)
With the continued success of the MiniMe DSP series of home subwoofers, Earthquake felt that a smaller sibling was needed to help complement the line. The all-new MiniMe DSP P8 utilizes Earthquake’s unique Class D circuitry with over 90% efficiency and the added advantage of DSP control through mobile devices. Complicated and professional room tuning is now made possible at your fingertips through a mobile app, allowing users to tune the MiniMe DSP P8 for flexible subwoofer placement in any room. Like the 10, 12, and 15-inch models, the DSP P8 offers users some of the same great performance and features like 600 watts of brute peak power output, high-EMF XLT active driver, and redesigned 8-inch mass-tuned SLAPS-M8 passive radiator with increased excursion potential.
Without a doubt, the MiniMe DSP P8 is one the best 8-inch subwoofers ever produced by Earthquake and is sure to fill a small to medium-sized room with massive bass for the utmost in sound quality and intense room-rumbling sound effects. It is available in both black or white high gloss piano finishes and with the dual active and passive driver setup. With a compact 10-inch cube enclosure, don’t let the size of this little monster fool you. It offers users high performance and superb bass control with a dynamic, punchy, and precise sound even under hard and continuous operation. Transform your listening experience with the all-new MiniMe DSP P8 subwoofer.
SKU: MiniMe DSP P8B (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P8W
Features
- Small form factor with a 10-inch cubed enclosure
- Built-in high-efficiency Class D amplifier
- Premium 8″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Redesigned 8″ mass-tuned SLAPS-M8 passive radiator system
- Double the radiating surface for an impactful response
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Multi-path optocoupler protection circuitry
- Automatic signal sensing
- Auto room correction (iWoofer™ Pro only)
- 3-Way Auto/On/Off mode switch
- DSP On/Off selector switch
- SHS (Sub-harmonic Synthesizer)
- Selective variable crossover
- 0–180° phase adjustment
- Operation status LED indicator
- Low-level RCA inputs
- RCA Mono DSP output
- Remote & remote eye included
- Removable grilles included
- High gloss white piano lacquer finish
Specifications
- Driver Size:
- 8″ active driver
- 8″ SLAPS passive radiator (Tuned to 27Hz with 160g added mass)
- Amplifier Power:
- 300 WRMS / 600W peak dynamic
- Frequency Response: 25–160Hz
- Crossover Frequency: 40–160Hz
- Nominal Impedance: 8-Ohm
- Input Impedance: 20 kOhm
- Enclosure Type: Ported with passive radiator
Dimensions
- H x W x D: 11ʺ (278mm) x 10.43ʺ (265mm) x 11.41ʺ (290mm)
- Weight: 18.2 lbs (8.25 kgs)
Other Information
Model: MiniMe DSP P8W
UPC: 0689759002536
Priced and sold by the pieceSKU: MiniMe DSP P8W -
Home Audio, Open Box
MiniMe DSP P8W (Open-Box)
With the continued success of the MiniMe DSP series of home subwoofers, Earthquake felt that a smaller sibling was needed to help complement the line. The all-new MiniMe DSP P8 utilizes Earthquake’s unique Class D circuitry with over 90% efficiency and the added advantage of DSP control through mobile devices. Complicated and professional room tuning is now made possible at your fingertips through a mobile app, allowing users to tune the MiniMe DSP P8 for flexible subwoofer placement in any room. Like the 10, 12, and 15-inch models, the DSP P8 offers users some of the same great performance and features like 600 watts of brute peak power output, high-EMF XLT active driver, and redesigned 8-inch mass-tuned SLAPS-M8 passive radiator with increased excursion potential.
Without a doubt, the MiniMe DSP P8 is one the best 8-inch subwoofers ever produced by Earthquake and is sure to fill a small to medium-sized room with massive bass for the utmost in sound quality and intense room-rumbling sound effects. It is available in both black or white high gloss piano finishes and with the dual active and passive driver setup. With a compact 10-inch cube enclosure, don’t let the size of this little monster fool you. It offers users high performance and superb bass control with a dynamic, punchy, and precise sound even under hard and continuous operation. Transform your listening experience with the all-new MiniMe DSP P8 subwoofer.
SKU: MiniMe DSP P8W (B-Stock) -
Home Audio, Open Box
MiniMe FF8v2 (Open-Box)
Specifications
- Built in 320-Watt, high efficiency digital amplifier
- 8-inch long throw, premium quality drivers
- Sealed front firing enclosure design
- Convenient compact size
- Automatic signal-sensing turn-on and stand-by mode
- Perfect for all sub applications
- Operation status LEDs
- RCA & high level inputs
- Selective variable crossover
- 50 – 160Hz Frequency adjustment
- 0 – 180° Phase adjustment
- SUB/LFE Operation Switch
- Black high gloss piano lacquer finish
- 110/220V selector switch
SKU: MiniMe FF8v2 (B-Stock) -
Home Audio, Open Box
MiniMe P63 (Open-Box)
The Earthquake Sound MiniMe P63 Subwoofer is a micro-sized, ultra-powerful subwoofer elegantly crafted in a high-gloss piano finish with beautiful grille-less flush-mounted drivers on three sides. It is designed for people who love music and movies at full throttle without bulky equipment in the living space. At less than 9″ on all sides, the P63 is easy to place on a low shelf, beneath a table, behind furniture, or in a corner.
The MiniMe P63’s incredible performance is achieved through the symbiotic relationship of the 6.5″ premium XLT active driver and two 6.5″ passive radiators coupled with a 500 Watts peak Class D power amplifier. Implementing dual passive radiators drastically increases the system’s capability and efficiency, resulting in ultra-low frequency reproduction at louder sound levels than previously achieved by any manufacturer of this size.
SKU: MINIME P63 (B-Stock) -
Home Audio, Open Box
MiniMe P8Wv2 (Open-Box)
Specifications
- Built-in 320 watts high efficiency digital amplifier
- 8 inch premium long throw active driver
- Patented SLAPS-M8 passive radiator
- Convenient compact enclosure
- Frequency Response: 27–160Hz
- Automatic signal-sensing turn-on and stand-by mode
- Perfect for all sub applications
- Operation status LEDs
- RCA & high level inputs
- Selective variable crossover
- 50–160Hz frequency adjustment
- 0–180° Phase adjustment
- SUB/LFE operation switch
- Auto on/off
- White high gloss piano lacquer finish
- 110/220V selector switch
- Removable grilles
- Rubber stabilizing feet
Note: This model will ship with the silver ME320 plate amplifier.
SKU: MiniMe P8Wv2 (B-Stocl) -
Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers, Tactile Transducers
MQB-1 Tactile Transducer
Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers, Tactile TransducersMQB-1 Tactile Transducer
An Immersive Audio Experience Awaits
The MQB-1 tactile transducer or bass shaker transmits subsonic bass frequencies and vibrations into an object it’s mounted to. It can supplement or replace traditional subwoofers and is ideal for situations where headphones must be used. Like conventional subwoofers, it receives its signal from the LFE output and can be amplified by an amplifier (XJ-300ST). It is suitable for home theater, music, and gaming applications. Installing it on a gaming chair provides an immersive experience by generating massive amounts of vibration.
SKU: MQB-1 -
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile Transducers
MQB-HTK1 Bass Shaker Kit
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile TransducersMQB-HTK1 Bass Shaker Kit
An Immersive Audio Experience Awaits
Tactile transducers, called “bass shakers,” are designed to transmit subsonic bass frequencies that can be felt and heard. By mounting the device on a couch or chair, the vibrations produced can be transferred to the body, providing a tactile sound experience. In some cases, tactile transducers can even replace traditional subwoofers, especially when headphones may be necessary to avoid disturbing others. Tactile transducers can be connected to the LFE output, which is also used by conventional subwoofers. These devices are powered by an amplifier, such as the Class J XJ-300ST, that provides a powerful and precise low-frequency effect. The tactile transducer seamlessly integrates and enhances the audio experience when paired with an existing subwoofer.
Note: The MQB-HTK1 kit comes with one XJ-300ST amplifier and one MQB-1 Tactile Transducer.
SKU: MQB-HTK1 -
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile Transducers
MQB-HTK2 Bass Shaker Kit
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile TransducersMQB-HTK2 Bass Shaker Kit
An Immersive Audio Experience Awaits
Tactile transducers, called “bass shakers,” are designed to transmit subsonic bass frequencies that can be felt and heard. By mounting the device on a couch or chair, the vibrations produced can be transferred to the body, providing a tactile sound experience. In some cases, tactile transducers can even replace traditional subwoofers, especially when headphones may be necessary to avoid disturbing others. Tactile transducers can be connected to the LFE output, which is also used by conventional subwoofers. These devices are powered by an amplifier, such as the Class J XJ-300ST, that provides a powerful and precise low-frequency effect. The tactile transducer seamlessly integrates and enhances the audio experience when paired with an existing subwoofer.
Note: The MQB-HTK2 kit comes with one XJ-300ST amplifier and two MQB-1 Tactile Transducers.
SKU: MQB-HTK2 -
Home Audio, Open Box
OH6 One-Hander (Open-Box)
Features
- 6.5″ 2-way coaxial design
- 1″ (25mm) pivoting silk dome neodymium tweeter
- Low mass stiff carbon fiber cone woofer for a smooth, accurate, and detailed output
- Edgeless design for reduced visibility/seamless integration
- Trimless round magnetically attached paintable grilles (Square grilles sold separately)
- In-wall or in-ceiling applications
- Bass & treble tonal selector controls
- Dog ear locking mechanism
- Elaborate crossover network
- Gold plated spring loaded terminals
- EZ Mount System
- Grille removal tool included
Specifications
- Power Handling: 150 Watts MAX
- Frequency Response: 50Hz–15kHz
- Impedance: 8-Ohm
- Sensitivity: 87dB 1W/1M
Dimensions
- Frame Diameter: 9.05″ (230mm)
- Grille Diameter: 9.13″ (232mm)
- Cutout Diameter: 7.87″ (200mm)
- Mounting Depth: 3.14″ (80mm)
- Overall Depth: 3.5″ (88.9mm)
- Magnet Diameter: 3.34″ (85mm)
- Speaker Weight: 3.9 lbs (1.76 kgs)
Other Information
Model: OH6
EAN: 0689759002178
Priced and sold by the pairSKU: OH6 (B-Stock) -
Home Audio, In-Wall & In-Ceiling Speakers
OH6 One-Hander (PAIR)
Features
- 6.5″ 2-way coaxial design
- 1″ (25mm) pivoting silk dome neodymium tweeter
- Low mass stiff carbon fiber cone woofer for a smooth, accurate, and detailed output
- Edgeless design for reduced visibility/seamless integration
- Trimless round magnetically attached paintable grilles (Square grilles sold separately)
- In-wall or in-ceiling applications
- Bass & treble tonal selector controls
- Dog ear locking mechanism
- Elaborate crossover network
- Gold plated spring loaded terminals
- EZ Mount System
- Grille removal tool included
Specifications
- Power Handling: 150 Watts MAX
- Frequency Response: 50Hz–15kHz
- Impedance: 8 Ohm
- Sensitivity: 87dB 1W/1M
Dimensions
- Frame Diameter: 9.05″ (230mm)
- Grille Diameter: 9.13″ (232mm)
- Cutout Diameter: 7.87″ (200mm)
- Mounting Depth: 3.14″ (80mm)
- Overall Depth: 3.5″ (88.9mm)
- Magnet Diameter: 3.34″ (85mm)
- Speaker Weight: 3.9 lbs (1.76 kgs)
Other Information
Model: OH6
EAN: 0689759002178
Priced and sold by the pairSKU: OH6
