Home Audio
Showing 25–48 of 197 results
-
Home Audio, Open Box
Cinénova IR16 (Open-Box)
Specifications
- Bridgeable output
- Zone IR control with individual digital pad
- Decor friendly keypads
- Four built-in IR repeaters
- Rear gain control limiter to limit the output gain of the zone pad
- LOCAL/BUS input audio selector for each zone
- 12V DC trigger
- Individually driven amplifier blocks (each block is driven by a discrete complementary output class A/B stage with selected components
- Individual power supplies (bifilars) for power isolation, accuracy, and better channel separation
SKU: Cinénova IR16 (B-Stock) -
Home Audio, Subwoofers
Couch Potato CP8
Add Massive Fast Bass to Underutilized Areas
The Earthquake CP8 Couch Potato is a powered down-firing subwoofer specifically designed for special applications, providing deep and precise bass directly to your seating area. With its low-profile design and high-performance features, the CP8 is an exceptional choice for enhancing your home theater experience. For those seeking a sleek and unobtrusive solution, the CP8 excels in providing impactful bass without sacrificing valuable floor space. Its flexible placement options make it an essential component to any home theater system and will remain discreet while providing you with a dynamic and immersive audio environment.
SKU: CP8 -
Home Audio, Open Box
CP8 Couch Potato (Open-Box)
Features
- Convenient and slim form factor offers flexibility and concealment without sacrificing floor space
- Allows for closer proximity to the listener for better bass response time
- Only 7″ in height allows users a variety of placement possibilities
- 8″ premium active driver
- 2″ high temperature voice coil
- Long excursion Santoprene surround
- Durable pressed paper cone
- Built-in 300 watts max high efficiency class A/B amplifier
- Down firing bass reflex enclosure design increases output by coupling the floor with the active driver
- Large 3″ port ensures high output of the lowest frequencies
- Auto On/off signal sensing
- RCA (low) level audio input
- High level input terminals (Up to 10 volts)
- High pass filtered output terminals
- 0–180° phase inverting switch
- High quality MDF enclosure with black laminate outer finish
Specifications
- Power Output:
- 150 Watts Continuous
- 300 Watts Peak
- Frequency response: 20Hz–180Hz
- Crossover Frequency: 40Hz–120Hz
- Input Impedance: 47,000 ohms
- Input Sensitivity: 50mV–2.3V
- 89dB 1W/1M
- THD: 0.001% @ 50Hz
- Fs: 38Hz
- Qts: 0.516
Dimensions
- H x W x D: 7″ (177.8mm) x 24″ (601mm) x 12″ (304.8mm)
- Height includes feet
- Weight: 24.58 lbs (11.15 kgs)
Other Information
Model: CP-8
EAN: 0068975900176
Priced and sold by the piecePLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: CP8 B-Stock -
DJ / Pro Audio, Home Audio, Open Box, Open Box
DJ-10M (Open-Box)
Features
- Built-in 600 Watts MAX amplifier
- 10″ woofer with 1.5″ voice coil
- Compression tweeter driver with 1″ voice coil
- Wide dispersion horn design for maximum uniform coverage
- Impact resistant nylon fiber reinforced ABS cabinet
- 1/4 inch microphone input with separate gain control
- Line RCA inputs
- 1/4 inch output connector
- Bass & treble tone control
- Master volume output control
- Stand mountable
- Rear clip alert red LED indicator
- Front signal presence blue LED indicator
- 110V/220V selectable switch
Intended Use
- DJ and/or Pro Sound applications
- PA systems, Karaoke,live music
- Schools, halls, places of worship
- Conference/meeting rooms
- Gyms/fitness centers
Other Information
Model: DJ-10M
EAN: 0068975901005
Priced and sold by the pieceSKU: DJ-10M (B-Stock) -
DJ / Pro Audio, DJ Speakers, DJ/PA Monitors, Home Audio, Midrange Speakers
DJ-8M
Specifications
- Built-in 480 watts MAX amplifier
- 8″ woofer with 1.5″ voice coil
- Compression tweeter driver with 1″ voice coil
- Frequency Response 60Hz–18kHz
- Wide dispersion horn design for maximum uniform coverage
- Impact resistant nylon fiber reinforced ABS cabinet
- 1/4″ microphone input with separate gain control
- Line RCA inputs
- 1/4″ output connector
- Bass and treble tonal controls
- Master volume output control
- Stand mountable
- Rear clip alert red LED indicator
- Front signal presence blue LED indicator
- 110V/220V selectable switch
- Finish Black
Intended Uses
- DJ and/or Pro Sound applications
- PA systems, karaoke, live music
- Schools, halls, places of worship
- Conference/meeting rooms
- Gyms/fitness centers
Dimensions
- H x W x D: 16.5″ (419mm) x 11.5″ (292mm) x 10.5″ (267mm)
- Weight: 17.4 lbs (7.89 kgs)
Other Information
Model: DJ-8M
UPC: 0168975910936
Sold and priced by the pieceSKU: DJ-8M -
DJ / Pro Audio, Home Audio, Open Box, Open Box
DJ-8M (Open-Box)
Specifications
- Built-in 480 watts MAX amplifier
- 8″ woofer with 1.5″ voice coil
- Compression tweeter driver with 1″ voice coil
- Frequency Response 60Hz–18kHz
- Wide dispersion horn design for maximum uniform coverage
- Impact resistant nylon fiber reinforced ABS cabinet
- 1/4″ microphone input with separate gain control
- Line RCA inputs
- 1/4″ output connector
- Bass and treble tonal controls
- Master volume output control
- Stand mountable
- Rear clip alert red LED indicator
- Front signal presence blue LED indicator
- 110V/220V selectable switch
- Finish Black
- Priced and sold by the piece
Intended Uses
- DJ and/or Pro Sound applications
- PA systems, karaoke, live music
- Schools, halls, places of worship
- Conference/meeting rooms
- Gyms/fitness centers
Dimensions
- H x W x D: 16.5″ (419mm) x 11.5″ (292mm) x 10.5″ (267mm)
- Weight: 17.4 lbs (7.89 kgs)
SKU: DJ-8M-(B-Stock) -
Home Audio, In-Wall & In-Ceiling Speakers
ECS 3.0
Features
- Compatible with Dolby Atmos®
- Compact with paintable grille and frame
- Easy connect push terminals
- Powerful neodymium magnet
- Mounting clips for easy installation
- Self-enclosed design to protect against humid environments
- Optional black grilles (Sold Separately)
- Recommended use with BTA-250 Bluetooth In-Wall Amplifier
Specifications
- Power Handling: 45 Watts MAX
- Frequency Response: 150Hz–20kHz
- Impedance: 8-Ohm
- Sensitivity: 85dB
- Voice Coil Diameter: 1″ (25.2mm)
Dimensions
- Overall Diameter: 3.19″ (81mm)
- Cut Out Diameter: 2.56″ (65mm)
- Mounting Depth: 2.31″ (58.8mm)
Other Information
Model: ECS 3.0
UPC: 0689759001829
Priced and sold by the pairSKU: ECS 3.0 -
Home Audio, Open Box
ECS 3.0 (Open-Box)
Features
- Compatible with Dolby Atmos®
- Compact with paintable grille and frame
- Easy-connect push terminals
- Powerful neodymium magnet
- Mounting clips for easy installation
- Self-enclosed design to protect against humid environments
- Optional black grilles (Sold Separately)
- Recommended use with BTA-250 Bluetooth In-Wall Amplifier
- Sold and priced by the pair
Specifications
- Power Handling: 45-Watts
- Impedance: 8-Ohm
- Sensitivity: 85dB
- Voice Coil Diameter: 1″ (25.2mm)
- Frequency Response: 150Hz–20kHz
Dimensions
- Overall Diameter: 3.19″ (81mm)
- Cut Out Diameter: 2.56″ (65mm)
- Mounting Depth: 2.31″ (58.8mm)
PLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: ECS 3.0 (B-Stock) -
Home Audio, In-Wall & In-Ceiling Speakers
ECS 4.0 v2
New to the Earthquake Edgeless series of in-ceiling speakers, the ECS 4.0 v2 is a versatile 4-inch full-range speaker designed for seamless indoor and outdoor applications. Boasting a compact and self-enclosed design with humidity-resistant components, the ECS 4.0 v2 offers a wider installation flexibility, making it ideal for areas such as bathrooms, kitchens, and outdoor living spaces.
SKU: ECS 4.0 v2 -
Home Audio, In-Wall & In-Ceiling Speakers
ECS-SS82
Features
- 8″ (203mm) high quality polypropylene cone woofer
- 1″ (25mm) silk dome swiveling neodymium tweeter
- Wide rubber surround for extended bass response and more piston
- Adjustable bass and treble tonal controls
- Magnetically attached & paintable speaker grilles
- Easy install Turn-N-Lock™ installation mechanisms
- Echo control R435 sound absorbing material
- Impact resist ABS plastic enclosure
- Elaborate crossover networks
- Gold plated spring loaded speaker terminals
- Up to 20° angled SweetSpot for total dispersion flexibility
- Perfect for all sub applications
Specifications
- Power Handling: 30–300 Watts
- Frequency Response: 30Hz–30kHz
- Nominal Impedance: 8-ohm
- Sensitivity: 91dB @ 1W/1M
- Wire Gauge Recommended: 12
- Voice Coil: Single
Dimensions
- Overall Diameter: 11.25″ (285mm)
- Cut Out Diameter: 9.68″ (245mm)
- Mounting Depth: 5.81″ (147.5mm)
- Weight: 7.64 lbs (3.46 kgs)
Other Information
Model: ECS-SS82
UPC: 0689759001966
Priced and sold by the pieceSKU: ECS-SS82 -
Home Audio, In-Wall & In-Ceiling Speakers
ECS6.5
Features
- 6.5″ (165mm) low mass stiff Kevlar cone midbass driver
- 1″ (25mm) swiveling silk dome neodymium tweeter
- Frameless design for reduced visibility and seamless blend
- Round magnetically attached and paintable grilles
- +/- 3dB bass & treble selector
- 12dB/Octave with polyswitch protection
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Optional square grilles sold separately
- Compatible with the RK-C6 Rough-In Kit
Specifications
- Power Handling: 300 Watts MAX
- Frequency Response: 40Hz–20kHz
- Impedance: 8-Ohm
- Sensitivity: 87dB 1W/1M
Dimensions
- Overall Diameter: 8.56″ (217mm)
- Cut Out Hole: 7.87″ (200mm)
- Mounting Depth: 4.31″ (110mm)
- Weight: 3.9 lbs (1.76 kgs)
Other Information
Model: ECS6.5
UPC: 0068975900619
Priced and sold by the pairSKU: ECS6.5 -
Home Audio, In-Wall & In-Ceiling Speakers
ECS6D
Features
- 6.5″ (165mm) low mass stiff Kevlar cone midbass driver
- Dual 1″ (25mm) swiveling silk dome neodymium tweeters
- Frameless design for reduced visibility and seamless blend
- Round magnetically attached and paintable grilles
- +/- 3dB bass & treble selector
- 12dB/Octave with polyswitch protection
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Optional square grilles sold separately
- Compatible with the RK-C6 Rough-In Kit
Specifications
- Power Handling: 300 Watts MAX
- Frequency Response: 40Hz–20kHz
- Impedance:
- 8-Ohm Dipole Mode
- 4-Ohm Bipole Mode
- Sensitivity: 87dB 1W/1M
Dimensions
- Overall Diameter: 8.56″ (217mm)
- Cut Out Hole: 7.87″ (200mm)
- Mounting Depth: 4.31″ (110mm)
- Weight: 4 lbs (1.81 kgs)
Other Information
Model: ECS6D
UPC: 0068975900817
Priced and sold by the pieceSKU: ECS6DUAL -
Home Audio, In-Wall & In-Ceiling Speakers
ECS8.0
Features
- 8″ (203mm) low mass stiff Kevlar cone midbass driver
- 1″ (25mm) swiveling silk dome neodymium tweeter
- Frameless design for reduced visibility and seamless blend
- Round magnetically attached and paintable grilles
- +/- 3dB bass & treble selector
- 12dB/Octave with polyswitch protection
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Optional square grilles sold separately
- Compatible with the RK-C8 Rough-In Kit
Specifications
- Power Handling MAX: 400 Watts
- Frequency Response: 30Hz–20kHz
- Impedance: 8 Ohm
- Sensitivity: 88dB 1W/1M
Dimensions
- Overall Diameter: 10.5″ (267mm)
- Cut Out Dimensions: 9.5″ (240mm)
- Mounting depth: 4.87″ (124mm)
- Weight: 4.3 lbs (1.95 kgs)
Other Information
Model: ECS8.0
UPC: 0068975900626
Priced and sold by the pairSKU: ECS8.0 -
Home Audio, In-Wall & In-Ceiling Speakers
ECS8D
Features
- 8″ (203mm) low mass stiff Kevlar cone midbass driver
- Dual 1″ (25mm) swiveling silk dome neodymium tweeters
- Frameless design for reduced visibility and seamless blend
- Round magnetically attached and paintable grilles
- +/- 3dB bass & treble selector
- 12dB/Octave with polyswitch protection
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Optional square grilles sold separately
- Compatible with the RK-C8 Rough-In Kit
Specifications
- Power Handling: 450 Watts MAX
- Frequency Response: 30Hz–20kHz
- Impedance:
- 8-Ohm Dipole Mode
- 4-Ohm Bipole Mode
- Sensitivity: 88dB 1W/1M
Dimensions
- Overall Diameter: 10.51″ (267mm)
- Cut Out Hole: 9.5″ (242mm)
- Mounting Depth: 4.88″ (124mm)
- Weight: 4.5 lbs (2.04 kgs)
Other Information
Model: ECS8D
UPC: 0068975900824
Priced and sold by the pieceSKU: ECS8DUAL -
Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Horns & Tweeters, Pro Sound
EQH Waveguide Horns
Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Horns & Tweeters, Pro SoundEQH Waveguide Horns
Features
- Enhances sound system with crystal-clear sound quality and dependable performance
- Wide compatibility makes it a versatile addition to any car or pro audio build
- Designed to be used with the HDX2 and other compression horn drivers
- Universal screw-on 1″ throat diameter with 1-3/8″-18 TPI threads
- High-quality black ABS plastic offers corrosion resistance
- Offers excellent sound dispersion for a variety of venues
- Easy twist On/Off Installation
Dimensions
- EQH-326 Rectangle Plastic Horn
- 10.43″ (265mm) x 4.37″ (111mm) x 6.77″ (172mm)
- EQH-318 Round Plastic Horn
- 5.94″ (151mm) x 5.94″ (151mm) x 9.96″ (253mm)
- EQH-1125 Square Plastic Horn
- 4.52″ (115mm) x 4.52″ (115mm) x 2.95″ (75mm)
Priced and sold by the piece
SKU: n/a -
Accessories, Bluetooth Speakers, Home Audio, WiFi/Wireless
EQuatic Portable Bluetooth Speaker
Specifications
- Less than 2-inch cube
- Water resistant
- Wirelessly stream music from Bluetooth® enabled devices
- Compact and portable design
- Supports hands free phone mode
- At least 6 hours of music play
- Over 5 hours of talk time
Other Information
Model: EQuatic-Black
EAN: 0689759001485
Priced and sold by the pieceSKU: EQuatic -
Center Channel Speakers, Home Audio, In-Wall & In-Ceiling Speakers
EWS530C In-Wall LCR
Features
- Frameless design for reduced visibility/seamless blend
- Magnetically attached and paintable grille
- Two 5.25″ (133mm) low mass stiff kevlar cone midbass drivers
- One 3″ (76mm) low mass stiff kevlar cone midrange driver
- Two 1″ (25mm) swiveling silk dome neodymium tweeters
- Elaborate crossover network
- +/- 3dB bass & treble controls
- 12dB/Octave with polyswitch protection
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
Specifications
- Power Handling: 350 Watts MAX
- Frequency Response: 40Hz—20kHz
- Sensitivity: 87dB 1W/1M
- Impedance: 8-Ohm
Dimensions
- Outer Dimensions: 9.75″ (248mm) x 13.75″ (349mm)
- Cut Out Hole: 8.81″ (224mm) x 12.83″ (326mm)
- Mounting Depth: 3.34″ (85mm)
- Weight: 6.8 lbs (3.1 kgs)
Other Information
Model: EWS530C
UPC: 0068975900602
Priced and sold by the pieceSKU: EWS530C -
Home Audio, In-Wall & In-Ceiling Speakers
EWS600 (PAIR)
Features
- Frameless design for reduced visibility/seamless blend
- Magnetically attached, versatile, paintable grilles
- One 6.5″ low mass stiff Kevlar cone midbass driver
- one 1″ (25mm) swiveling silk dome neodymium tweeter
- +/- 3dB bass & treble tonal controls
- 12dB/Octave with polyswitch protection
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
Specifications
- Power Handling: 350 Watts MAX
- Frequency Response: 40Hz–20kHz
- Sensitivity: 87dB 1W/1M
- Impedance: 8-Ohm
Dimensions
- Outer Dimensions: 11.92″ (303mm) x 8.54″ (217mm)
- Cut Out Dimensions: 10.82″ (275mm) x 7.40″ (188mm)
- Mounting Depth: 3.54″ (90mm)
- Weight: 3.5 lbs (1.58 kgs)
Other Information
Model: EWS600
UPC: 0068975900589
Priced and sold by the pairSKU: EWS600 -
Home Audio, In-Wall & In-Ceiling Speakers
EWS800 Edgeless In-Wall Speaker
Features
- 2-way in-wall speaker system
- Frameless design for reduced visibility/seamless blend
- Magnetically attached, versatile, paintable grilles
- Low mass stiff Kevlar cone body for smooth, accurate, and excellent sound reproduction
- Swiveling silk dome neodymium tweeter
- +/- 3dB bass & treble tonal controls
- 12dB/Octave with polyswitch protection
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” installation mechanism
Specifications
- Driver Components: 2-way system
- Woofer Size: 8″ (203mm) midbass
- Tweeter: 1″ (25mm) silk dome neodymium
- Power Handling: 500 Watts MAX
- Frequency Response: 30Hz—20kHz
- Sensitivity: 88dB 1W/1M
- Impedance: 8-Ohm
Dimensions
- Outer Dimensions: 13.75″ (349mm) x 9.75″ (248mm)
- Cut Out Dimensions: 12.83″ (326mm) x 8.81″ (224mm)
- Mounting depth: 4.05″ (103mm)
- Weight: 4.2 lbs (1.9 kgs)
Other Information
Model: EWS800
UPC: 0068975900596
Priced and sold by the pairSKU: EWS800 -
Center Channel Speakers, Home Audio, In-Wall & In-Ceiling Speakers
EWSLA63
Features
- 2-way line array system
- Six 3″ low mass poly cone midbass
- One 1″ swiveling silk dome neodymium tweeter
- Wide-angle eye-ball tweeter mount for precise directivity adjustment
- Elaborate crossover networks
- Stiff extruded aluminum resonance-free body frame
- Easy install Turn-N-Lock™ mechanism
- Frameless design for reduced visibility/seamless blend
- Gold plated spring loaded terminals
- Magnetically attached and paintable grille
Specifications
- Power Handling: 350 Watts Max
- Frequency Response: 40Hz–20kHz
- Nominal Impedance: 8-Ohm
- Sensitivity: 89dB @ 1W/1M
- Grille Finish: White
Dimensions
- Product Dimensions: 26.49″ (673mm) x 4.76″ (121mm)
- Cut Out Dimensions: 25.74″ (654mm) x 4.01″ (102mm)
- Mounting Depth: 2.87″ (73mm)
- Weight: 9.1 lbs (4.12 kgs)
Other Information
Model: EWSLA63
UPC: 0068975901067
Priced and sold by the pieceSKU: EWSLA63 -
Home Audio, Open Box
EWSLA63 (Open-Box)
Features
- Six low mass poly cone midbass
- One swiveling silk dome neodymium tweeter
- Elaborate crossover networks
- Stiff aluminum body
- Resonance free
- Easy install “Turn-N-Lock™” mechanism
- Frameless design for reduced visibility/seamless blend
- Gold plated spring loaded terminals
- Magnetically attached and paintable grilles
Specifications
- Power Handling: 350 Watts Max
- Frequency Response: 40Hz–20kHz
- Mid-Range: 3″ low mass poly cone midbass
- Tweeter: 1″ silk dome neodymium
- Grille Finish: White
Dimensions
- Overall Height: 26.49″ (673mm)
- Overall Width x Weight : 4.76″ (121mm)
- Cut Out Height: 25.74″ (654mm)
- Cut Out Width: 4.01″ (102mm)
- Mounting Depth: 2.87″ (73mm)
PLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: EWSLA63 (B-Stock) -
FF Series, Home Audio, Subwoofers
FF10 Front Firing Subwoofer
The FF10 Front Firing Subwoofer by Earthquake marks a significant advancement in achieving top-notch bass quality at an affordable price. This subwoofer is crafted to deliver exceptional performance in a compact and stylish design, all while remaining budget-friendly. The woofers in the FF series showcase Earthquake’s dedication to excellence, drawing inspiration from the acclaimed MiniMe subwoofers known for their impressive excursion capabilities and power-handling capacity. The amplifiers that drive these subwoofers reflect Earthquake’s expertise, building on the success of the renowned Sub-Series to provide a refined and potent audio experience. By blending cutting-edge technology with premium design, the FF10 Front Firing Subwoofer ensures an immersive and dynamic sound experience for audio enthusiasts everywhere.
SKU: FF10 -
Home Audio, Open Box
FF10 Front Firing Subwoofer (Open-Box)
Specifications
- 10″ high power subwoofer
- Built-in 400W high-efficiency Class AB power amplifier
- Front-firing design with small footprint
- Single slot port for optimized bass output
- 12dB/Octave variable filter from 40Hz–180Hz
- Frequency Response: 25Hz–125Hz
- 0 – 180° phase shift
- Front-mounted volume control knob
- Automatic signal detection circuitry
- Low level (RCA) audio inputs
- Line through (RCA) audio outputs
- High level audio inputs
- Full range line through (high level) speaker outputs
- Also available in 6.5″ and 12″ models
Dimensions
- H x W x D: 13.58″ (345mm) x 11.49″ (292mm) x 15.55″ (395mm)
- Weight: 26.5lbs (12kgs)
Other Information
Model: FF10
EAN: 0689759002659
Priced and sold by the pieceSKU: FF10 (B-Stock) -
FF Series, Home Audio, Subwoofers
FF12 Front Firing Subwoofer
The FF12 Front Firing Subwoofer by Earthquake marks a significant advancement in achieving top-notch bass quality at an affordable price. This subwoofer is crafted to deliver exceptional performance in a compact and stylish design, all while remaining budget-friendly. The woofers in the FF series showcase Earthquake’s dedication to excellence, drawing inspiration from the acclaimed MiniMe subwoofers known for their impressive excursion capabilities and power-handling capacity. The amplifiers that drive these subwoofers reflect Earthquake’s expertise, building on the success of the renowned Sub-Series to provide a refined and potent audio experience. By blending cutting-edge technology with premium design, the FF12 Front Firing Subwoofer ensures an immersive and dynamic sound experience for audio enthusiasts everywhere.
SKU: FF12