SWAT-2.4X Wireless Audio Transceiver
In stock
The Earthquake SWAT-2.4X stereo wireless audio transceiver allows you to wirelessly play audio material from your audio source player to any speaker. Hardwiring your speakers to your sound source is costly and time-consuming. The SWAT-2.4X makes installation a snap and does not compromise sound quality for convenience. It is extremely versatile and perfect for apartments or outdoor settings. It even has microphone capability, so you can transmit voice as well.
$149.99 $349.99
In stock
CompareSWAT-2.4X consists of a transmitter (a unit connecting to the source) and a receiver (connecting to the amplifier or powered speaker). The SWAT-2.4X transmitter connects to a stereo, MP3 player, computer, or any other device that can play audio through a 3.5mm stereo jack or RCA output. It can also be connected directly to the speaker outputs via its high/speaker level input supporting 0.5–17V RMS. An RCA input connects the receiver to an amplifier or a powered speaker. Multiple receivers can connect wirelessly to one transmitter if you want the music to play in different areas or multiple systems. Extra receivers can also be purchased separately.
Once the transmitter and receiver are paired, the receiver will receive signals from the transmitter automatically. If there is any interference on the current channel, you must change the transmitter’s channel; the receiver can sense the frequency change and adjust automatically. It has 20 channels, more channels than any other wireless transceiver. There is also a one in 20 million chance that the pairing channel will interfere with a different signal. Both the transmitter and the receiver must be connected to a power source, of which there are two options. One is the DC power supply, which connects to any wall outlet, and the other is USB.
Key Features
- Two types of inputs supporting microphones and stereo
- Supports single source to mass broadcast
- Additional high level input 0.5–17V RMS for direct connection to the amplifier (hooks up just like a regular speaker)
- USB connection supports power
- Digital transmission
- Frequency: 2400–2484MHz
- HDCD transmission grade
- Low power consumption
- Audio muting function when receiving weak or no signal
- Auto channel scanning function
Applications
- Audio transmission in a large room (DJ)
- Outdoor speakers (BBQ, patio, pool)
- Wireless audio transmission for surveillance
- Paging System
- Wireless microphones or loudspeakers
- iPod, sound card, CD, DVD, MP3, smartphones, other media players
- Wireless headphones
- Ambient music (in offices, hospitals, waiting rooms)
- Frequency Band: 2.4Ghz
- Channel Selections: 20 Channels
- Work Voltage: 3.6–6VDC
- Transmitter Work Current: Max 120 mA
- Receiver Work Current: Max 35 mA
- Operation Temperature: 5–149 °F (-5–65 °C)
- Practical Mode Freq. Range: 2400–2484 MHz
- Transmitter Modulation: GFSK
- Band Rate: 2 Mbps
- Frequency Stability: ±156kHz
- Practical Working Frequency: 2400–2484 MHz
- Channel Space: 4 MHz
- RF Range: Up to 328 ft. (100 m) of open field
- Transmitter TX Power: 0–20 dBm
- Receiver RX Sensitivity: 90 dBm
- Transmitter Input Level: Max 1.0V RMS
- Transmitter Input Impedance: 10 kOhm
- Transmitter Input Interface: Mic & high level audio
- Receiver Stereo Output Level 1: 30mW RL = 32 Ohms
- Receiver Stereo Output Level 2: 50mW RL = 16 Ohms
- Receiver Output Impedance: 1 kOhm
- In/Out Gain Ratio: 1:1
- Frequency Response: 20Hz–20kHz (±1dB)
- Latency: <0.5ms
- Sampling Ratio: 64kHz @ 16-bit x 2
- S/N Ratio: 95dB
- THD: 0.3% @ 1kHz
- Dynamic Range: 90dB
- Channel Separation: 70dB
In The Box
- One (1) transmitter
- One (1) receiver
- One (1) 3.5mm to 3.5mm cable
- One (1) high level input plug
- Two (2) 3.5mm to RCA cables
- Two (2) USB 5V AC power supply adapters
Other Information
Model: SWAT-2.4X
EAN: 0689759000655
Priced and sold by the set
Based on 0 reviews
Be the first to review “SWAT-2.4X Wireless Audio Transceiver”
You must be logged in to post a review.
There are no reviews yet.