Shop
Showing 121–144 of 269 results
-
Amplifiers, Car Audio
MiNi D2000 2nd Gen
Features
- Clip suppression technology to avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Bridge In/Out feature allows two MiNi D amplifiers (of same model) to be linked together for triple the output of a single unit.
- Fan free operation with stellar efficiency negates the need for noisy fans even when driven continuously 2db into clip.
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Power and Protection LED
- Variable Subsonic Filter
- Gain Level Control
- Remote Gain Level Control
- Remote base knob and cable (over 20ft) included.
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 2000 Watts
- RMS Power:
- 1200 Watts @ 1-Ohm
- 1000 Watts @ 2-Ohm
- 650 Watts @ 4-Ohm
- Gain Level Control: 0.2V–5V RMS
- Low Pass Filter: 40Hz–180Hz
- Subsonic Filter: OFF–50Hz
- Frequency Adjustment: 30Hz–80Hz
- Bass Boost: 0–12dB
Dimensions
- HxWxD: 1.92″ (49mm) x 6.29″ (160mm) x 10.55″ (268mm)
Other Information
Model: MiNi D2000 2nd Gen
UPC: 0689759100690
Priced and sold by the pieceSKU: MiNi D2000 2nd Gen -
Car Audio, Open Box
MiNi D2500 (Open-Box)
Specifications
- Channels: 1 (MONO)
- Class: Digital Class “D”
- Max Power: 2000 Watts
- RMS Power:
2000 Watts @ 1-Ohm
1800 Watts @ 2-Ohm
850 Watts @ 4-Ohm - Fuse Rating: 100A (required)
- Dimensions (H x W x D): 1-7/8″ (48mm) x 12-13/16″ (325mm) x 6-5/16″ (160mm)
SKU: MiNi D2500 (B-Stock) -
Amplifiers, Car Audio
MiNi D2500 2nd Gen
Features
- Clip suppression technology to avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Bridge In/Out feature allows two MiNi D amplifiers (of same model) to be linked together for triple the output of a single unit.
- Fan free operation with stellar efficiency negates the need for noisy fans even when driven continuously 2db into clip.
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Power and Protection LED
- Variable Subsonic Filter
- Gain Level Control
- Remote Gain Level Control
- Remote base knob and cable (over 20ft) included.
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 2500 Watts
- RMS Power:
- 2000 Watts @ 1-Ohm
- 1800 Watts @ 2-Ohm
- 850 Watts @ 4-Ohm
- Gain Level Control: 0.2V–5V RMS
- Low Pass Filter: 40Hz–180Hz
- Subsonic Filter: OFF–50Hz
- Frequency Adjustment: 30Hz–80Hz
- Bass Boost: 0–12dB
Dimensions
- HxWxD: 1.92″ (49mm) x 6.29″ (160mm) x 13.54″ (344mm)
Other Information
Model: MiNi D2500 2nd Gen
UPC: 0689759100706
Priced and sold by the pieceSKU: MiNi D2500 2nd Gen -
Amplifiers, Car Audio
MiNi D3000.4
The Earthquake MiNi D3000.4 is a 4-channel amplifier that merges two MiNi D1500.2 amplifiers into one unit, resulting in one of the most power-dense 4-channel amplifiers on the market today. It provides 180W RMS per channel and handles demanding speakers with exceptional performance. The amplifier rivals high-end home audio quality, setting a new benchmark with advanced features and design. Lead engineer Joseph Sahyoun aimed to revolutionize car amplifiers by creating smaller, more robust, and smarter units, overcoming technical challenges to enhance efficiency and intelligence in design.
SKU: MiNi D3000.4 -
Car Audio, Open Box
MiNi D3000.4 1st Gen (Open-Box)
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 3000 Watts
- RMS Power:
4 x 130W @ 4-Ohm
4 x 180W @ 2-Ohm
2 x 360W @ 4-Ohm bridged - Channel Separation: 90dB
- Crossover Frequencies: 20 – 500Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 3 x 35A (included)
- Dimensions (H x W x D): 2-1/16″ (52mm) x 11-5/8″ (295mm) x 8-5/16″ (212mm)
SKU: MiNi D3000.4 1st Gen (B-Stock) -
Amplifiers, Car Audio
MiNi D3000.4 2nd Gen
The Earthquake Sound Mini D3000.4 2nd Gen is one of the most power-dense 4-channel amplifiers on the market today. With 200 WRMS to each of its 4 channels, the MiNi D3000.4 has enough power to satisfy even the hungriest speakers while remaining incredibly cool and composed. The Mini D3000.4 is a true next-gen amplifier with features and a level of design sophistication years beyond the competition. With the Mini D series, Earthquake once again reasserts absolute dominance in the field of car amplifier technology.
SKU: MiNi D3000.4 2nd Gen -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP FF-12
Features
- Built-in 600W high-efficiency Class D amplifier
- 12″ premium extended excurion driver
- DSP control through mobile app (iWoofer™ Compatible)
- Auto room correction
- Turn-on & standby mode
- SHS (Sub-harmonic Synthesizer)
- Selective variable crossover
- Operation status LED light
- Auto/On/Off signal Sensing
- 0–180° phase adjustment switch
- DSP On/Off switch
- Bluetooth™ pairing for DSP
- Low level RCA inputs and outputs
- IR input with remote and remote eye
- CNC machined MDF enclosure
- Black polyurethane finish
- No grille included
- Designed, built, and assembled in-house
Specifications
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Driver Size: 12-inch
- Power Output: 600 Watts Peak
Dimensions
- Height: 15.25″ (388mm)
- Width: 17.25″ (437mm)
- Depth: 15″ (382mm)
- Weight: 40 lbs (18.14 kgs)
Other Information
Model: MiniMe DSP FF-12
EAN: 0689759002291
Priced and sold by the pieceSKU: MiniMe DSP FF-12 -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP FF-15
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grille included
Specifications
- Power Output: 1000 Watts Peak
- Amplifier Class: Class D
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Nominal Impedance: Dual 4-Ohm
- Voice Coil Diameter: 3″ (76mm)
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 66.74 lbs (30.27 kgs)
Other Information
Model: MiniMe DSP FF-15
EAN: 0689759001942
Priced and sold by the pieceSKU: MiniMe DSP FF-15 -
Home Audio, Open Box
MiniMe DSP FF-15 (Open-Box)
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grille included
Specifications
- Power Output: 1000 Watts Peak
- Amplifier Class: Class D
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Nominal Impedance: Dual 4-Ohm
- Voice Coil Diameter: 3″ (76mm)
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 66.74 lbs (30.27 kgs)
Other Information
Model: MiniMe DSP FF-15
EAN: 0689759001942
Priced and sold by the pieceSKU: MiniMe DSP FF-15 (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-10
Specifications
- Built-in 600W high-efficiency Earthquake Class D amplifier
- 10″ long throw premium active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- 10″ mass-tuned SLAPS patented passive radiator system
- DSP control through a mobile app
- Frequency Response: 20Hz–135Hz
- Crossover Frequency: 40Hz–160Hz
- Auto signal sensing
- Auto room correction
- Turn-on & Stand-by Mode
- Sub-harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED indicator
- Low level RCA inputs and outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Dimensions
- H x W x D: 12.5″ (318mm) x 14″ (355mm) x 12.25″ (312mm)
- Weight: 30 lbs (13.6 kgs)
Other Information
Model: MiniMe DSP P-10
EAN: 0689759001805
Priced and sold by the pieceSKU: MiniMe DSP P-10 -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-12
Specifications
- Built-in 600W high-efficiency Earthquake Class D amplifier
- 12″ long throw premium active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- 12″ mass-tuned SLAPS patented passive radiator system
- DSP control through a mobile app
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Auto signal sensing
- Auto room correction
- Turn-on & Stand-by Mode
- Sub-harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED indicator
- Low level RCA inputs and outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Dimensions
- H x W x D: 15.25″ (388mm) x 17.25″ (437mm) x 15″ (382mm)
- Weight: 41 lbs (18.6 kgs)
Other Information
Model: MiniMe DSP P-12
EAN: 0689759001812
Priced and sold by the pieceSKU: MiniMe DSP P-12 -
Home Audio, Open Box
MiniMe DSP P-12 (Open-Box)
Specifications
- Built-in 600W high-efficiency Class D amplifier
- 12″ long-throw premium quality driver
- 12″ mass-tuned slaps patented passive radiator system
- DSP control through a mobile app
- Frequency response: 18Hz–115Hz
- Automatic signal-sensing
- Auto room correction
- Turn-on & standby mode
- SHS (sub-harmonic synthesizer)
- Selective variable crossover
- Sub operation switch for different ranges
- Operation status LED light
- Low level RCA inputs
- Mono DSP RCA outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Product Dims
- Height: 15.25″ (388mm)
- Width: 17.25″ (437mm)
- Depth: 15″ (382mm)
- Includes feet, grilles, and amplifier protrusions
Note
This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiniMe DSP P12 (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-15
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- 15″ patented SLAPS-15v2 passive radiator system
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grilles included
Specifications
- Built-in high-efficiency Class D amplifier
- 1000 Watts MAX
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Dual 3″ (76mm) diameter Kapton voice coil
- Nominal Impedance: Dual 4 Ohm
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 75 lbs (34 kgs)
Other Information
Model: MiniMe DSP P-15
EAN: 0689759001935
Priced and sold by the pieceSKU: MiniMe DSP P15 -
Home Audio, Open Box
MiniMe DSP P10 (Open-Box)
Specifications
- Built-in 600W high-efficiency Class D amplifier
- 10″ long-throw premium quality driver
- 10″ mass-tuned slaps patented passive radiator system
- DSP control through a mobile app
- Frequency response: 20Hz–135Hz
- Automatic signal-sensing
- Auto room correction
- Turn-on & standby mode
- SHS (sub-harmonic synthesizer)
- Selective variable crossover
- Sub operation switch for different ranges
- Operation status LED light
- Low level RCA inputs
- Mono DSP RCA outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Dimensions
- Height: 12.5″ (318mm)
- Width: 14″ (355mm)
- Depth: 12.25″ (312mm)
- Includes feet, grilles, and amplifier protrusions
Other Information
Model: MiniMe DSP P-10
UPC: 0689759001805
Priced and sold by the pieceSKU: MiniMe DSP P10 (B-Stock) -
Home Audio, Open Box
MiniMe DSP P15 (Open-Box)
Specifications
- Built-in 1000 Watts MAX High Efficiency Class “D” Amplifier
- 15″ Long Throw Premium Active Driver
- 15″ Patented SLAPS-15v2 Passive Radiator System
- Dual 3″ (76mm) diameter Kapton voice coil
- DSP Control Through Mobile App
- Nominal Impedance: Dual 4-ohm
- Frequency Response: 18–115Hz
- Crossover Frequency: 40–160Hz
- 0–180° Phase Adjustment Switch
- Automatic Signal-Sensing
- Auto Room Correction (iWoofer™ Pro only)
- 3-Way Auto/On/Off Mode Switch
- DSP On/Off Selector Switch
- XLR and RCA Input Selector Switch
- SHS (Sub-harmonic Synthesizer)
- Selective Variable Crossover
- Sub Operation Switch For Different Ranges
- Operation Status LED Light
- Low Level RCA Inputs and Outputs
- Fully Balanced XLR input
- Mono DSP XLR Output
- Remote & Remote eye Included
- Grilles Included
- High Gloss Black Piano Lacquer Finish
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 75 lbs (34 kgs)
SKU: MiniMe DSP P15 (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P63B
Ultra-Compact Powered Subwoofer with Digital Signal Processing
The Earthquake MiniMe DSP P63 subwoofer is a groundbreaking powerhouse that merges innovative design and state-of-the-art technology to provide an outstanding audio experience. Redefining possibilities in a small size, this subwoofer boasts a sleek, compact enclosure design, high peak power, and advanced features such as digital signal processing (DSP). Equipped with a 6.5-inch inverted active driver and dual opposing 6.5-inch passive bass radiators, all housed in a sleek 9-inch cubed enclosure, the MiniMe DSP P63 showcases a patented design that enhances performance by increasing sound-radiating surface area and system efficiency. The MiniMe DSP P63 provides clean, impactful bass without sacrificing valuable floor space.
SKU: MINIME DSP P63B -
Home Audio, Open Box
MiniMe DSP P63B (Open-Box)
Features
- Micro form factor allows for a variety of placement options
- Modern grille-less design offers a high aesthetic acceptance factor
- 3x the radiating surface area for impactful bass response
- Built-in advanced Earthquake class D amplifier for high output and efficiency
- Single inverted 6.5″ active driver with patented edge overlapping suspension
- Dual inverted opposing passive radiators with patented edge overlapping suspension
- Extends low-frequency response
- Anti-wobble cone construction and reinforced dust caps
- Multi-path Optocoupler Protection Circuitry
- Full DSP control through a mobile app
- Auto Room Correction (iWoofer™ Pro only)
- Sub-Harmonic Synthesizer (SHS)
- Up to 25 bands of parametric EQ
- On The Fly Variable Q EQ
- Variable low pass filter
- Low-level RCA inputs
- 0–180° phase adjustment control
- 3-way Auto/On/Off mode switch
- Automatic signal-sensing
- DSP On/Off selector switch
- Volume Control
- Power, signal, and DSP LED indicators
- Built-in 5.2V USB power port
- Can be used with SWAT-2.4X Stereo Wireless Audio Transceiver
- Rubber stabilizing feet
- 110V/220V AC selector
- High gloss black piano lacquer finish
- Protected by US Patent #11,140,474 B1
Specifications
- Amplifier Power:
- 600 Watts MAX
- Driver Size:
- Single 6.5″ active driver with edge overlapping suspension
- Dual opposing 6.5″ passive bass radiators with edge overlapping suspension
- Enclosure Type: Dual passive tuned to 27Hz
- Frequency Response: 30Hz–160Hz
- Crossover Frequency: 40Hz–180Hz
- Nominal Impedance: 4 Ohm
Dimensions
- HxWxD: 8.75″ (222mm) x 8.75″ (222mm) x 9″ (229mm)
- Weight: 13.84 lbs (6.27 kgs)
Other Information
Model: MiniMe DSP P63B
UPC: 0689759002406
Priced and sold by the piecePLEASE NOTE: This item is an open-box item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MINIME DSP P63B (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P8B
Features
- Small form factor with a 10-inch cubed enclosure
- Built-in high-efficiency Class D amplifier
- Premium 8″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Redesigned 8″ mass-tuned SLAPS-M8 passive radiator system
- Double the radiating surface for an impactful response
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Multi-path optocoupler protection circuitry
- Automatic signal sensing
- Auto room correction (iWoofer™ Pro only)
- 3-Way Auto/On/Off mode switch
- DSP On/Off selector switch
- SHS (Sub-harmonic Synthesizer)
- Selective variable crossover
- 0–180° phase adjustment
- Operation status LED indicator
- Low-level RCA inputs
- RCA Mono DSP output
- Remote & remote eye included
- Removable grilles included
- High gloss black piano lacquer finish
Specifications
- Driver Size:
- 8″ active driver
- 8″ SLAPS passive radiator (Tuned to 27Hz with 160g added mass)
- Amplifier Power:
- 300 WRMS / 600W peak dynamic
- Frequency Response: 25–160Hz
- Crossover Frequency: 40–160Hz
- Nominal Impedance: 8-Ohm
- Input Impedance: 20 kOhm
- Enclosure Type: Ported with passive radiator
Dimensions
- H x W x D: 11ʺ (278mm) x 10.43ʺ (265mm) x 11.41ʺ (290mm)
- Weight: 18.2 lbs (8.25 kgs)
Other Information
Model: MiniMe DSP P8B
EAN: 0689759002383
Priced and sold by the pieceSKU: MiniMe DSP P8B -
Home Audio, Open Box
MiniMe DSP P8B (Open-Box)
With the continued success of the MiniMe DSP series of home subwoofers, Earthquake felt that a smaller sibling was needed to help complement the line. The all-new MiniMe DSP P8 utilizes Earthquake’s unique Class D circuitry with over 90% efficiency and the added advantage of DSP control through mobile devices. Complicated and professional room tuning is now made possible at your fingertips through a mobile app, allowing users to tune the MiniMe DSP P8 for flexible subwoofer placement in any room. Like the 10, 12, and 15-inch models, the DSP P8 offers users some of the same great performance and features like 600 watts of brute peak power output, high-EMF XLT active driver, and redesigned 8-inch mass-tuned SLAPS-M8 passive radiator with increased excursion potential.
Without a doubt, the MiniMe DSP P8 is one the best 8-inch subwoofers ever produced by Earthquake and is sure to fill a small to medium-sized room with massive bass for the utmost in sound quality and intense room-rumbling sound effects. It is available in both black or white high gloss piano finishes and with the dual active and passive driver setup. With a compact 10-inch cube enclosure, don’t let the size of this little monster fool you. It offers users high performance and superb bass control with a dynamic, punchy, and precise sound even under hard and continuous operation. Transform your listening experience with the all-new MiniMe DSP P8 subwoofer.
SKU: MiniMe DSP P8B (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P8W
Features
- Small form factor with a 10-inch cubed enclosure
- Built-in high-efficiency Class D amplifier
- Premium 8″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Redesigned 8″ mass-tuned SLAPS-M8 passive radiator system
- Double the radiating surface for an impactful response
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Multi-path optocoupler protection circuitry
- Automatic signal sensing
- Auto room correction (iWoofer™ Pro only)
- 3-Way Auto/On/Off mode switch
- DSP On/Off selector switch
- SHS (Sub-harmonic Synthesizer)
- Selective variable crossover
- 0–180° phase adjustment
- Operation status LED indicator
- Low-level RCA inputs
- RCA Mono DSP output
- Remote & remote eye included
- Removable grilles included
- High gloss white piano lacquer finish
Specifications
- Driver Size:
- 8″ active driver
- 8″ SLAPS passive radiator (Tuned to 27Hz with 160g added mass)
- Amplifier Power:
- 300 WRMS / 600W peak dynamic
- Frequency Response: 25–160Hz
- Crossover Frequency: 40–160Hz
- Nominal Impedance: 8-Ohm
- Input Impedance: 20 kOhm
- Enclosure Type: Ported with passive radiator
Dimensions
- H x W x D: 11ʺ (278mm) x 10.43ʺ (265mm) x 11.41ʺ (290mm)
- Weight: 18.2 lbs (8.25 kgs)
Other Information
Model: MiniMe DSP P8W
UPC: 0689759002536
Priced and sold by the pieceSKU: MiniMe DSP P8W -
Home Audio, Open Box
MiniMe DSP P8W (Open-Box)
With the continued success of the MiniMe DSP series of home subwoofers, Earthquake felt that a smaller sibling was needed to help complement the line. The all-new MiniMe DSP P8 utilizes Earthquake’s unique Class D circuitry with over 90% efficiency and the added advantage of DSP control through mobile devices. Complicated and professional room tuning is now made possible at your fingertips through a mobile app, allowing users to tune the MiniMe DSP P8 for flexible subwoofer placement in any room. Like the 10, 12, and 15-inch models, the DSP P8 offers users some of the same great performance and features like 600 watts of brute peak power output, high-EMF XLT active driver, and redesigned 8-inch mass-tuned SLAPS-M8 passive radiator with increased excursion potential.
Without a doubt, the MiniMe DSP P8 is one the best 8-inch subwoofers ever produced by Earthquake and is sure to fill a small to medium-sized room with massive bass for the utmost in sound quality and intense room-rumbling sound effects. It is available in both black or white high gloss piano finishes and with the dual active and passive driver setup. With a compact 10-inch cube enclosure, don’t let the size of this little monster fool you. It offers users high performance and superb bass control with a dynamic, punchy, and precise sound even under hard and continuous operation. Transform your listening experience with the all-new MiniMe DSP P8 subwoofer.
SKU: MiniMe DSP P8W (B-Stock) -
Home Audio, Open Box
MiniMe FF8v2 (Open-Box)
Specifications
- Built in 320-Watt, high efficiency digital amplifier
- 8-inch long throw, premium quality drivers
- Sealed front firing enclosure design
- Convenient compact size
- Automatic signal-sensing turn-on and stand-by mode
- Perfect for all sub applications
- Operation status LEDs
- RCA & high level inputs
- Selective variable crossover
- 50 – 160Hz Frequency adjustment
- 0 – 180° Phase adjustment
- SUB/LFE Operation Switch
- Black high gloss piano lacquer finish
- 110/220V selector switch
SKU: MiniMe FF8v2 (B-Stock) -
Home Audio, Open Box
MiniMe P8Wv2 (Open-Box)
Specifications
- Built-in 320 watts high efficiency digital amplifier
- 8 inch premium long throw active driver
- Patented SLAPS-M8 passive radiator
- Convenient compact enclosure
- Frequency Response: 27–160Hz
- Automatic signal-sensing turn-on and stand-by mode
- Perfect for all sub applications
- Operation status LEDs
- RCA & high level inputs
- Selective variable crossover
- 50–160Hz frequency adjustment
- 0–180° Phase adjustment
- SUB/LFE operation switch
- Auto on/off
- White high gloss piano lacquer finish
- 110/220V selector switch
- Removable grilles
- Rubber stabilizing feet
Note: This model will ship with the silver ME320 plate amplifier.
SKU: MiniMe P8Wv2 (B-Stocl)
