-72%
, , ,

SWAT-2.4X (Open-Box)

Availability:

In stock


Features

  • Two types of inputs supporting microphones and stereo
  • Supports single source to mass broadcast
  • Additional high level input 0.5V–17V RMS for direct connection to amplifier (hooks up just like a regular speaker)
  • USB connection supports power and audio source (source device must support analog 2 pin USB audio output)
  • Digital transmission
  • Frequency: 2400–2528MHz
  • HDCD transmission grade
  • Low power consumption
  • Audio muting function when receiving weak or no signal
  • Auto channel scanning function

Applications

  • Audio transmission in a large room (DJ)
  • Outdoor speakers (BBQ, patio, pool)
  • Wireless audio transmission for surveillance
  • Paging System
  • Wireless microphones or loudspeakers
  • iPod, sound card, CD, DVD, MP3, smart phones players or other music players
  • Wireless headphones
  • Ambient music (in offices, hospitals, waiting rooms)

Specifications

  • 2.4Ghz
  • Channel Selections: 30 Channels
  • Work Voltage: 3.6–6VDC
  • Transmitter Work Current: Max 120 mA
  • Receiver Work Current: Max 35 mA
  • Operation Temperature: 5–149 °F (-5–65 °C)
  • Practical Mode Freq. Range: 2400–2528 MHz
  • Transmitter Modulation: GFSK
  • Band Rate: 2 Mbps
  • Ferquency Stability: ±156kHz
  • Practical Working Frequency: 2400–2428 MHz
  • Channel Space: 4 MHz
  • RF Range: Up to 150 feet (45 meters) of open field
  • Trnsmitter TX Power: 0–20 dBm
  • Receiver RX Sensativity: 90 dBm
  • Transmitter Input Level: Max 1.0 Vrms
  • Transmitter Input Impedance: 10 kOhm
  • Transmitter Input Interface: Mic & High Level Audio
  • Receiver Stereo Output Level 1: 30mW RL = 32 Ohms
  • Receiver Stereo Output Level 2: 50mW RL = 16 Ohms
  • Receiver Output Impedance: 1 kOhm
  • In/Out Gain Ratio: 1:1
  • Frequency Response: 20Hz–20kHz (±1dB)
  • Latency: <0.5ms
  • Sampling Ratio: 64k @ 16 bit x 2
  • S/N Ratio: 95dB
  • THD: 0.3% @ 1kHz
  • Dynamic Range: 90dB
  • Channel Separation: 70dB

In The Box

  • One (1) transmitter
  • One (1) receiver
  • One (1) 3.5mm to 3.5mm cable
  • One (1) high level input plug
  • Two (2) 3.5mm ro RCA cables
  • Two (2) 100–240V power supplies

PLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.

 

$99.00 $349.00

In stock

Compare

SWAT-2.4X Wireless Audio Transceiver

The Earthquake SWAT-2.4X stereo wireless audio transceiver allows you to play audio material from your audio source player to any speaker wirelessly. Hard wiring your speakers to your sound source is costly and time consuming. The SWAT-2.4X makes install a snap and does not compromise sound quality for convenience. It is extremely versatile and perfect for apartments or outdoor settings. It even has microphone capability so you can transmit voice as well.

SWAT-2.4X consists of a transmitter (a unit that connects to the source) and a receiver (a unit that connects to the amplifier or powered speaker). The SWAT-2.4X transmitter connects to a stereo, MP3 player, computer, or any other device that can play audio through a 3.5mm stereo jack or RCA output. Alternately it can also be connected directly to the speaker outputs via its high level input supporting 0.5V to 17V RMS. The receiver is then connected to an amplifier or a powered speaker through an RCA input. Multiple receivers can connect wirelessly to one transmitter if you want the music to play in different areas or on multiple systems. Extra receivers can also be purchased separately.

Once the transmitter and receiver are paired, the receiver will receive signals from the transmitter automatically. If there is any interference on the current channel, all you have to do is change to the channel of the transmitter; the receiver can sense the frequency change and will adjust automatically. It has 20 available channels, more channels than any other wireless transceiver to date. There is also a one in 20 million chance that the pairing channel will interfere with a different signal. Both the transmitter and the receiver must be connected to a power source of which there are two options. One is the DC power supply which connects to any wall outlet and the other is USB.

 

PLEASE NOTE: This item is an open-box item that has been refurbished and tested. Minor signs of use may be cosmetically visible.

MANUAL

CUT SHEET

ADDITIONAL FILES

SKU: SWAT-2.4X (B-Stock) Categories: , , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SWAT-2.4X (Open-Box)”

There are no reviews yet.