BT5.3NC
In stock
The Earthquake 2-in-1 BT5.3NC Bluetooth Audio Adapter serves as a transmitter or receiver that exhibits low distortion, low power consumption, low latency, and high-fidelity sound with stereo compatibility. Whether you seek wireless music streaming or hands-free communication, the BT5.3NC is the solution, as it seamlessly integrates with a broad range of audio systems, catering to both fixed home and portable audio setups. With its built-in microphones and noise-cancellation technology, you will enjoy crystal-clear calls from a distance at the touch of a button. Embrace the freedom, convenience, and portability of the Earthquake BT5.3NC, your ultimate audio companion.
$34.99 $45.99
In stock
CompareKey Features
- Compact and Portable Design
- Enhanced Bluetooth® Wireless v5.3
- Switchable Receiver and Transmitter Modes
- aptX, AAC, SBC, MP3, and FastStream Support
- 5V USB Type-C Rechargeable
- Up To 50 ft. (15 m) Wireless Range
- Lower Latency Than Wi-Fi
- LE Audio Transmission
- 6 Hours of Continuous Playback
- Fast Device Pairing & Auto Shutdown
- Dual Connection Support
- Built-in Microphones with Support for Hands-Free Calling
- Clear Voice Capture Technology Eliminates Unwanted Noises for Crystal-Clear Communication
- 3.5 mm AUX IN/OUT Interface
What’s In The Box
- (1) BT5.3NC Bluetooth Audio Adapter
- (1) 3.5mm Male to Male Connector
- (1) USB-A to USB-C Charging Cable
- (1) Product Manual
Home Audio Applications
Connect one BT5.3NC switched to RX mode to a powered subwoofer via 3.5mm to RCA adapter and another BT5.3NC switched to TX to the subwoofer output of your AV receiver/processor via 3.5mm to RCA adapter. Initiate the pairing procedure, look for BT5.3NC in available Bluetooth devices, and check all volume levels from your source, BT5.3NC units, and subwoofer prior to use.
Connect one BT5.3NC switched to RX mode to a pair of active speakers via 3.5mm to RCA adapter and initiate the pairing procedure. Look for BT5.3NC in available devices and check all volume levels from your source, BT5.3NC unit, and speakers prior to use.
Connect one BT5.3NC switched to TX mode to a compatible TV/monitor’s 3.5mm audio output via the supplied 3.5mm adapter. Then, initiate the pairing procedure for the BT5.3NC and the Bluetooth-enabled audio output device. Check all volume levels from your source, BT5.3NC unit, and TV/monitor prior to use.
Output Devices
- Earbuds
- Over-ear headphones
- Portable wireless speakers
- Smart home speakers and hubs
Mobile Audio Applications
Connect one BT5.3NC switched to RX mode to your factory or aftermarket car stereo via the 3.5mm AUX adapter. Initiate the pairing procedure, look for BT5.3NC in available Bluetooth devices, and check all volume levels from your Bluetooth-enabled source, BT5.3NC unit, and car stereo prior to use.
Connect one BT5.3NC switched to RX mode to the RCA inputs of an amplifier via a 3.5mm to RCA adapter. Initiate the pairing procedure and check all volume levels from your Bluetooth-enabled source, BT5.3NC unit, and car stereo prior to use.
Technical Specifications
| Weight | 1 lbs |
|---|---|
| Dimensions | 4 × 4 × 1 in |
| Unit Dimensions | 2.24 in. (57 mm) x 1.27 in. (32.5 mm) x (13.3 mm) |
| Unit Weight | 0.56 oz (16 g) |
| Bluetooth | v5.3 |
| Interface | 3.5mm AUX Jack |
| Battery Capacity | 200mAh |
| Charge Limit Voltage | 5.25V |
| Charging Current | 300mA |
| Shutdown Current | 20uA |
| Charging Time | 45 min |
| Codec Support | aptX, AAC, SBC, MP3, FastStream |
| Wireless Support | A2DP, AVCTP, AVDTP, AVRCP, HFP, SPP |
| Microphone Range | 1.5–6.5 ft. (0.5–2 m) |
| Wireless Frequency | 2.403–2.480 GHz |
| Wireless Range | 50 ft. (15 m) |
Other Information
Model: BT5.3NC
EAN: 0689759003274
Priced and sold by the piece
Based on 0 reviews
Be the first to review “BT5.3NC”
You must be logged in to post a review.
There are no reviews yet.