home theater amplifier
Showing all 9 results
-
Amplifiers, Home Audio
Cinénova Grande 5
Specifications
- Number of Channels
- 5 channels
- Power Rating Per Channel
- (8-ohm load), all channels driven: 360 Watts
- (4-ohm load), all channels driven: 610 Watts
- (2-ohm load), all channels driven: 810 Watts
- Output Load Impedance: Safe with all loads from 2-Ohm to 16-Ohm
- Input Impedance
- RCA: 28-kOhms
- XLR: 48-kOhms
- Input Sensitivity
- RCA: 1.6V
- XLR: 2.4V
- Voltage Gain (Av): 42V Gain Relative to 1 watt
- Frequency Response: Up to 50kHz ±0.1dB
- Crossover Filter (low-pass/highpass): Variable Selector from 20Hz – 5kHz with a slope of 12dB/Octave
- Total Harmonic Distortion + Noise: 0.003% at 1 watt
- Signal to Noise Ratio (A-Weighted): Greater than -121 dB
- Cross Talk / Channel Separation: Greater than -110 dB from 17Hz to 40kHz
- Slew Rate: 55V/microsecond
- Damping Factor: 1600 at 8-Ohm, 800 at 4-Ohm, 400 at 2-Ohm
- DC Output Offset: Less than 0.004V
- Power Requirement: 120 VAC/240 VAC Factory Pre-set
- Handmade in the USA.
- Color: Black
Note: Cinénova Grande is hand built in the USA and undergoes a 24-hour test and burn-in process before it is measured and approved for sale. Each amplifier is supplied with its own individual data sheet, where the amplifier’s exact measurements are applied, and the name of the technician who performed the measurements. This is proof of performance and ensures that the amplifier lives up to our promise of guaranteed excellence.
SKU: Cinénova Grande 5 - Number of Channels
-
Home Audio, Open Box
Cinénova Grande 5 (Open Box)
Specifications
- Number of Channels
- 5 channels
- Power Rating Per Channel
- (8-ohm load), all channels driven: 360 Watts
- (4-ohm load), all channels driven: 610 Watts
- (2-ohm load), all channels driven: 810 Watts
- Output Load Impedance: Safe with all loads from 2-Ohm to 16-Ohm
- Input Impedance
- RCA: 28-kOhms
- XLR: 48-kOhms
- Input Sensitivity
- RCA: 1.6V
- XLR: 2.4V
- Voltage Gain (Av): 42V Gain Relative to 1 watt
- Frequency Response: Up to 50kHz ±0.1dB
- Crossover Filter (low-pass/highpass): Variable Selector from 20Hz – 5kHz with a slope of 12dB/Octave
- Total Harmonic Distortion + Noise: 0.003% at 1 watt
- Signal to Noise Ratio (A-Weighted): Greater than -121 dB
- Cross Talk / Channel Separation: Greater than -110 dB from 17Hz to 40kHz
- Slew Rate: 55V/microsecond
- Damping Factor: 1600 at 8-Ohm, 800 at 4-Ohm, 400 at 2-Ohm
- DC Output Offset: Less than 0.004V
- Power Requirement: 120 VAC/240 VAC Factory Pre-set
- Handmade in the USA.
- Color: Black
Note: Cinénova Grande is hand built in the USA and undergoes a 24-hour test and burn-in process before it is measured and approved for sale. Each amplifier is supplied with its own individual data sheet, where the amplifier’s exact measurements are applied and the name of the technician who performed the measurements. This is proof of performance and ensures that the amplifier lives up to our promise of guaranteed excellence.
SKU: Cinénova Grande 5 (B-Stock) - Number of Channels
-
Amplifiers, Home Audio
Cinenova Grande 7BR Amplifier
Specifications
- 1450 watts into 1 ohm. RMS
- 1000 watts into 2 ohm, RMS
- 660 watts into 4 ohm, RMS
- 330 watts into 8-ohm, RMS
- 1500 watts bridge-link into 8 ohm RMS
- 2500 watts bridge-link into 4 ohm RMS
- 2800 watts bridge-link into 2 ohm RMS
- XLR and RCA inputs
- Frequency Range: 1W + /-0.1dB: 20Hz–20kHz
- Signal-to-noise ratio: 122dB at 1kHz / 121dB at 5kHz / 120dB at 10kHz
- Input impedance: 27,000 ohms.
- 4000VA ferrite OFC low regulation transformer with separate secondary windings.
- Damping Factor: 1.600
- Cinénova Grande BR effortlessly exceeds technical standards set by THX, DTS and Dolby Laboratories.
- Channel Separation: at least 120dB.
- Max. Input voltage: 1.9 volts.
- THD: 1kHz, 8 ohms: 0.001%
- 12v trigger ( can be switched automatically from your preamplifier or other components with 12v trigger output).
- Built-in Crossover: selectable between high-pass and low-pass or disengaged. 20Hz – 5kHz infinitely variable. The crossover allows you to determine how much bandwidth your speakers to reproduce. Use the amplifier to bi-amping two channels can be made to reproduce bass / midrange frequencies and two channels for the treble and the last channel might. drive a large passive subwoofer. All this without using any crossovers.
- Oversized, gold plated 7-way output terminals.
- Weight: 61,5 kg. Carrying handle on the front panel. Proper lifting technique is recommended.
- Handmade in the USA.
Dimensions
- H x W x D: 9 1/4″ (235mm) x 18″ (457mm) x 21″ (533mm)
- Net Weight: 122lbs (55.3 kgs)
- Shipping Weight: 148lbs (67.1 kgs)
Other Information
Model: Cinénova Grande 7BR
UPC: 0068975900633
Priced and sold by the pieceModel: Cinénova Grande 7BRS
UPC: 0068975901203
Priced and sold by the pieceSKU: Cinénova Grande 7BR -
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile Transducers
MQB-HTK1 Bass Shaker Kit
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile TransducersMQB-HTK1 Bass Shaker Kit
An Immersive Audio Experience Awaits
Tactile transducers, called “bass shakers,” are designed to transmit subsonic bass frequencies that can be felt and heard. By mounting the device on a couch or chair, the vibrations produced can be transferred to the body, providing a tactile sound experience. In some cases, tactile transducers can even replace traditional subwoofers, especially when headphones may be necessary to avoid disturbing others. Tactile transducers can be connected to the LFE output, which is also used by conventional subwoofers. These devices are powered by an amplifier, such as the Class J XJ-300ST, that provides a powerful and precise low-frequency effect. The tactile transducer seamlessly integrates and enhances the audio experience when paired with an existing subwoofer.
Note: The MQB-HTK1 kit comes with one XJ-300ST amplifier and one MQB-1 Tactile Transducer.
SKU: MQB-HTK1 -
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile Transducers
MQB-HTK2 Bass Shaker Kit
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile TransducersMQB-HTK2 Bass Shaker Kit
An Immersive Audio Experience Awaits
Tactile transducers, called “bass shakers,” are designed to transmit subsonic bass frequencies that can be felt and heard. By mounting the device on a couch or chair, the vibrations produced can be transferred to the body, providing a tactile sound experience. In some cases, tactile transducers can even replace traditional subwoofers, especially when headphones may be necessary to avoid disturbing others. Tactile transducers can be connected to the LFE output, which is also used by conventional subwoofers. These devices are powered by an amplifier, such as the Class J XJ-300ST, that provides a powerful and precise low-frequency effect. The tactile transducer seamlessly integrates and enhances the audio experience when paired with an existing subwoofer.
Note: The MQB-HTK2 kit comes with one XJ-300ST amplifier and two MQB-1 Tactile Transducers.
SKU: MQB-HTK2 -
Home Audio, Subwoofers, Supernova Series
Supernova MKIV-10
The Earthquake Supernova MKIV-10 subwoofer is one of Earthquake’s most raw and unadulterated performance implementations of the SLAPS technology and the Supernova nameplate itself. Built with the singular obsession to take the bone-crushing power of SLAPS, XLT woofer geometry, and 450 Watts of Enhanced Class AB wattage to the realm of affordability. Throwing etiquette and moderation completely out the window, we have shamelessly shoehorned the proverbial BigBlock V8 into a subcompact, accepting full well that some people will find this much bass at this price point downright offensive. Enjoy harder-hitting music beats and thundering movie effects from a completely gimmick-free subwoofer. No blinking displays, useless remote controls, gift bags, or plastic novelty microphones! Welcome to Pure Performance!
SKU: MKIV-10 -
Home Audio, Open Box
Supernova MKIV-10 (Open-Box)
The Earthquake Supernova MKIV-10 subwoofer is one of Earthquake’s most raw and unadulterated performance implementations of the SLAPS technology and the Supernova nameplate itself. Built with the singular obsession to take the bone-crushing power of SLAPS, XLT woofer geometry, and 450 Watts of Enhanced Class AB wattage to the realm of affordability. Throwing etiquette and moderation completely out the window, we have shamelessly shoehorned the proverbial BigBlock V8 into a subcompact, accepting full well that some people will find this much bass at this price point downright offensive. Enjoy harder-hitting music beats and thundering movie effects from a completely gimmick-free subwoofer. No blinking displays, useless remote controls, gift bags, or plastic novelty microphones! Welcome to Pure Performance!
SKU: MKIV-10-B-Stock -
Amplifiers, Home Audio, Specials, Subwoofers
THOR LFE Kit
Big Bass From Shallow Place With Limited Space
Earthquake’s THOR IW-SUB10 in-wall subwoofer is poised to revolutionize the in-wall speaker market segment by offering a unique sealed box design of only 3.75″ (95mm) deep. Unlike traditional in-wall subwoofers, it doesn’t load the wall cavity, making installation a breeze with minimal guesswork on the installer’s part. Furthermore, the Thor IW-SUB10 in-wall subwoofer boasts a 20Hz response with exceptional performance complemented by a discreet, flexible design that blends seamlessly into any home audio setup. The package includes a metal grille and frames for custom fabric grilles, which enables perfect integration with no extra expense. This subwoofer is versatile enough to be mounted up into the ceiling or even on the floor, making it an excellent choice for anyone seeking thundering bass with limited space. Pair the IW-SUB10 with the highly efficient XJ-300ST, and you have a cool-running rock-solid modular amplifier with twice the output power of most amplifiers its size. Get massive, fast bass from a limited space with the XJ-300ST and IW-SUB10 LFE kit.
Note: THOW LFE Kit comes with one XJ-300ST amplifier and one IW-SUB10 subwoofer.
SKU: THOR-LFE-KIT -
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
XJ-300ST Stereo Amplifier
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home AudioXJ-300ST Stereo Amplifier
Features
- Class J stereo modular design provides cool running power
- Its compact and unimposing size makes it an installer’s go-to amplifier
- Numerous application possibilities with customizable channel setup
- Allows for MONO bridged, 2-channel, and 2.1-channel wiring configuration
- Versatility allows for multi-channel audio systems
- Proprietary Interlocking Design
- Used for joining two XJ-300STs for side-by-side rack mounting
- 1U rack space tall with half-rack width chassis
- Signal sensing toggle switch with +12V trigger input
- Selective variable crossover
- Bypass/lowpass toggle switch
- Turns crossover on or off
- 0–180° phase adjustment
- 110V/220V AC selector
- RCA inputs
- Volume control
- 4 detachable short rack ears included
- Used for both rack and wall mounting
- Back bracket included
- Links multiple XJ-300ST amplifiers
- Optional long ear extension brackets available – RM-300FR
- Technology Integrator’s 2016 Impact! Awards Finalist
Specifications
- Output Power:
- 2 x 110 WRMS @ 8-Ohm
- 2 x 170 WRMS @ 4-Ohm
- 170 WRMS @ 8-Ohm Mono Bridged
- 300 WRMS @ 4-Ohm Mono Bridged
- Frequency response: 20Hz–20kHz
- Input Impedance: 10 kOhm
- Impedance: 4–8 Ohm
- Crossover Frequency: 50Hz–160Hz
- SNR: > 97 dB
- Damping Factor: > 400
- THD: < 0.08%
In The Box
- (1) XJ-300ST Stereo Class J Amplifier
- (4) Short Mounting Ears
- Mounting screws included
- (1) Back Bracket
- Mounting screws included
- (4) Rubber Feet
- (1) Power Cord
Other Information
Model: XJ-300ST
EAN: 0068975901388
Priced and sold by the pieceSKU: XJ-300ST