Bluetooth
Showing all 20 results
-
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/Wireless
BT5.3NC
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/WirelessBT5.3NC
The Earthquake 2-in-1 BT5.3NC Bluetooth Audio Adapter serves as a transmitter or receiver that exhibits low distortion, low power consumption, low latency, and high-fidelity sound with stereo compatibility. Whether you seek wireless music streaming or hands-free communication, the BT5.3NC is the solution, as it seamlessly integrates with a broad range of audio systems, catering to both fixed home and portable audio setups. With its built-in microphones and noise-cancellation technology, you will enjoy crystal-clear calls from a distance at the touch of a button. Embrace the freedom, convenience, and portability of the Earthquake BT5.3NC, your ultimate audio companion.
SKU: BT5.3NC -
Amplifiers, Home Audio, WiFi/Wireless
BTA-250 In-Wall Amplifier
Earthquake Sound’s BTA-250 in-wall amplifier is a two-channel stereo amplifier that offers Bluetooth connectivity for homes or commercial spaces. The kit includes the amplifier, power supply, and adapter for easy installation. The BTA-250 provides 50W RMS per channel and features a single multifunction knob that serves as volume control, power management, and Bluetooth pairing. The sleek design fits directly into most standard single-gang electrical boxes, making it suitable for indoor and outdoor settings. It is ideal for expanding audio zones and wireless streaming and creatively enhances home audio systems.
SKU: BTA-250 -
Car Audio, Equalizers & Processors
EQ-4000BT v2
Features
- 4 Adjustable Bands of Equalization (-12dB to +12dB)
- 4 Input Sources (RCA, AUX, mini jack, Bluetooth™)
- 3 Stereo RCA Outputs (Front, Rear, Sub)
- 9 Volt RMS Output
- Input Gain Control
- Media Player Ready
- Fully Retractable Controls
- Volume Level Control
- Subwoofer Level Control
- Subwoofer Frequency Control
- Front Panel MAIN/AUX Control
- Front Panel Bluetooth ON/OFF Control
- Fader Action Control
- Blue Background LED
- Mounting Hardware and 1A Fuse Included
- 3 Pin Plug-in PCB Screw Terminal Block Connector Included
Specifications
- Operating Voltage: 10.5–16VDC
- Idle: 280 mA
- Recommended Fuse Size: 1 Ampere
- Input Sensitivity: 100 mVrms up to 14 Vrms
- Input Impedance: 8 kOhm up to 10.2 kOhm
- Output Impedance:
- Sub Channel: 510 Ohm
- Front & Rear Channels: 6.3 kOhm
- Output Level:
- Sub Channel 5 Vrms @ 0.1% THD
- Front & Rear Channels 4 Vrms @ 0.1% THD
- THD @ 3 Volts Output: 0.05%
- Frequency Response: 15Hz–34kHz @ -3dB
- Sub Frequency Control Range: 35–120Hz @ -3dB, 18dB/Oct.
- Sub Upper Cut Off Frequency: 100Hz
- Signal-to-Noise Ratio: 68dB
- Center Frequencies: 92dB
- Control Range: 150Hz, 550Hz, 2.5kHz, 15kHz
- Channel Separation: 30–40dB (12 O’clock is bypass position)
- Din Size: 1/2 Din
Other Information
Model: EQ-4000BT v2
EAN: 0689759101598
Priced and sold by the pieceSKU: EQ-4000BT v2 -
Accessories, Bluetooth Speakers, Home Audio, WiFi/Wireless
EQuatic Portable Bluetooth Speaker
Earthquake’s EQuatic wireless and water-resistant micro-speaker allows you to stream audio from your Bluetooth® enabled devices (i.e., iPhone®, iPad®, Android® or other audio-playing devices). The EQuatic can perform up to 6 hours of continuous music playback with extreme clarity and excellent quality when fully charged. Designed with convenience in mind, the EQuatic is water-resistant and supports hands-free phone mode with over 5 hours of talk time. Available in black, white, red, and hot pink, these micro speakers are great for everyday use, indoors or outdoors, rain or shine.
SKU: EQuatic -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP FF-12
Features
- Built-in 600W high-efficiency Class D amplifier
- 12″ premium extended excurion driver
- DSP control through mobile app (iWoofer™ Compatible)
- Auto room correction
- Turn-on & standby mode
- SHS (Sub-harmonic Synthesizer)
- Selective variable crossover
- Operation status LED light
- Auto/On/Off signal Sensing
- 0–180° phase adjustment switch
- DSP On/Off switch
- Bluetooth™ pairing for DSP
- Low level RCA inputs and outputs
- IR input with remote and remote eye
- CNC machined MDF enclosure
- Black polyurethane finish
- No grille included
- Designed, built, and assembled in-house
Specifications
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Driver Size: 12-inch
- Power Output: 600 Watts Peak
Dimensions
- Height: 15.25″ (388mm)
- Width: 17.25″ (437mm)
- Depth: 15″ (382mm)
- Weight: 40 lbs (18.14 kgs)
Other Information
Model: MiniMe DSP FF-12
EAN: 0689759002291
Priced and sold by the pieceSKU: MiniMe DSP FF-12 -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP FF-15
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grille included
Specifications
- Power Output: 1000 Watts Peak
- Amplifier Class: Class D
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Nominal Impedance: Dual 4-Ohm
- Voice Coil Diameter: 3″ (76mm)
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 66.74 lbs (30.27 kgs)
Other Information
Model: MiniMe DSP FF-15
EAN: 0689759001942
Priced and sold by the pieceSKU: MiniMe DSP FF-15 -
Home Audio, Open Box
MiniMe DSP FF-15 (Open-Box)
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grille included
Specifications
- Power Output: 1000 Watts Peak
- Amplifier Class: Class D
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Nominal Impedance: Dual 4-Ohm
- Voice Coil Diameter: 3″ (76mm)
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 66.74 lbs (30.27 kgs)
Other Information
Model: MiniMe DSP FF-15
EAN: 0689759001942
Priced and sold by the pieceSKU: MiniMe DSP FF-15 (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-10
Specifications
- Built-in 600W high-efficiency Earthquake Class D amplifier
- 10″ long throw premium active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- 10″ mass-tuned SLAPS patented passive radiator system
- DSP control through a mobile app
- Frequency Response: 20Hz–135Hz
- Crossover Frequency: 40Hz–160Hz
- Auto signal sensing
- Auto room correction
- Turn-on & Stand-by Mode
- Sub-harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED indicator
- Low level RCA inputs and outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Dimensions
- H x W x D: 12.5″ (318mm) x 14″ (355mm) x 12.25″ (312mm)
- Weight: 30 lbs (13.6 kgs)
Other Information
Model: MiniMe DSP P-10
EAN: 0689759001805
Priced and sold by the pieceSKU: MiniMe DSP P-10 -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-12
Specifications
- Built-in 600W high-efficiency Earthquake Class D amplifier
- 12″ long throw premium active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- 12″ mass-tuned SLAPS patented passive radiator system
- DSP control through a mobile app
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Auto signal sensing
- Auto room correction
- Turn-on & Stand-by Mode
- Sub-harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED indicator
- Low level RCA inputs and outputs
- Remote & remote eye included
- High gloss black piano lacquer finish
Dimensions
- H x W x D: 15.25″ (388mm) x 17.25″ (437mm) x 15″ (382mm)
- Weight: 41 lbs (18.6 kgs)
Other Information
Model: MiniMe DSP P-12
EAN: 0689759001812
Priced and sold by the pieceSKU: MiniMe DSP P-12 -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-15
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- 15″ patented SLAPS-15v2 passive radiator system
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grilles included
Specifications
- Built-in high-efficiency Class D amplifier
- 1000 Watts MAX
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Dual 3″ (76mm) diameter Kapton voice coil
- Nominal Impedance: Dual 4 Ohm
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 75 lbs (34 kgs)
Other Information
Model: MiniMe DSP P-15
EAN: 0689759001935
Priced and sold by the pieceSKU: MiniMe DSP P15 -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P63B
Ultra-Compact Powered Subwoofer with Digital Signal Processing
The Earthquake MiniMe DSP P63 subwoofer is a groundbreaking powerhouse that merges innovative design and state-of-the-art technology to provide an outstanding audio experience. Redefining possibilities in a small size, this subwoofer boasts a sleek, compact enclosure design, high peak power, and advanced features such as digital signal processing (DSP). Equipped with a 6.5-inch inverted active driver and dual opposing 6.5-inch passive bass radiators, all housed in a sleek 9-inch cubed enclosure, the MiniMe DSP P63 showcases a patented design that enhances performance by increasing sound-radiating surface area and system efficiency. The MiniMe DSP P63 provides clean, impactful bass without sacrificing valuable floor space.
SKU: MINIME DSP P63B -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P8B
Features
- Small form factor with a 10-inch cubed enclosure
- Built-in high-efficiency Class D amplifier
- Premium 8″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Redesigned 8″ mass-tuned SLAPS-M8 passive radiator system
- Double the radiating surface for an impactful response
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Multi-path optocoupler protection circuitry
- Automatic signal sensing
- Auto room correction (iWoofer™ Pro only)
- 3-Way Auto/On/Off mode switch
- DSP On/Off selector switch
- SHS (Sub-harmonic Synthesizer)
- Selective variable crossover
- 0–180° phase adjustment
- Operation status LED indicator
- Low-level RCA inputs
- RCA Mono DSP output
- Remote & remote eye included
- Removable grilles included
- High gloss black piano lacquer finish
Specifications
- Driver Size:
- 8″ active driver
- 8″ SLAPS passive radiator (Tuned to 27Hz with 160g added mass)
- Amplifier Power:
- 300 WRMS / 600W peak dynamic
- Frequency Response: 25–160Hz
- Crossover Frequency: 40–160Hz
- Nominal Impedance: 8-Ohm
- Input Impedance: 20 kOhm
- Enclosure Type: Ported with passive radiator
Dimensions
- H x W x D: 11ʺ (278mm) x 10.43ʺ (265mm) x 11.41ʺ (290mm)
- Weight: 18.2 lbs (8.25 kgs)
Other Information
Model: MiniMe DSP P8B
EAN: 0689759002383
Priced and sold by the pieceSKU: MiniMe DSP P8B -
Home Audio, Open Box
MiniMe DSP P8B (Open-Box)
With the continued success of the MiniMe DSP series of home subwoofers, Earthquake felt that a smaller sibling was needed to help complement the line. The all-new MiniMe DSP P8 utilizes Earthquake’s unique Class D circuitry with over 90% efficiency and the added advantage of DSP control through mobile devices. Complicated and professional room tuning is now made possible at your fingertips through a mobile app, allowing users to tune the MiniMe DSP P8 for flexible subwoofer placement in any room. Like the 10, 12, and 15-inch models, the DSP P8 offers users some of the same great performance and features like 600 watts of brute peak power output, high-EMF XLT active driver, and redesigned 8-inch mass-tuned SLAPS-M8 passive radiator with increased excursion potential.
Without a doubt, the MiniMe DSP P8 is one the best 8-inch subwoofers ever produced by Earthquake and is sure to fill a small to medium-sized room with massive bass for the utmost in sound quality and intense room-rumbling sound effects. It is available in both black or white high gloss piano finishes and with the dual active and passive driver setup. With a compact 10-inch cube enclosure, don’t let the size of this little monster fool you. It offers users high performance and superb bass control with a dynamic, punchy, and precise sound even under hard and continuous operation. Transform your listening experience with the all-new MiniMe DSP P8 subwoofer.
SKU: MiniMe DSP P8B (B-Stock) -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P8W
Features
- Small form factor with a 10-inch cubed enclosure
- Built-in high-efficiency Class D amplifier
- Premium 8″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Redesigned 8″ mass-tuned SLAPS-M8 passive radiator system
- Double the radiating surface for an impactful response
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Multi-path optocoupler protection circuitry
- Automatic signal sensing
- Auto room correction (iWoofer™ Pro only)
- 3-Way Auto/On/Off mode switch
- DSP On/Off selector switch
- SHS (Sub-harmonic Synthesizer)
- Selective variable crossover
- 0–180° phase adjustment
- Operation status LED indicator
- Low-level RCA inputs
- RCA Mono DSP output
- Remote & remote eye included
- Removable grilles included
- High gloss white piano lacquer finish
Specifications
- Driver Size:
- 8″ active driver
- 8″ SLAPS passive radiator (Tuned to 27Hz with 160g added mass)
- Amplifier Power:
- 300 WRMS / 600W peak dynamic
- Frequency Response: 25–160Hz
- Crossover Frequency: 40–160Hz
- Nominal Impedance: 8-Ohm
- Input Impedance: 20 kOhm
- Enclosure Type: Ported with passive radiator
Dimensions
- H x W x D: 11ʺ (278mm) x 10.43ʺ (265mm) x 11.41ʺ (290mm)
- Weight: 18.2 lbs (8.25 kgs)
Other Information
Model: MiniMe DSP P8W
UPC: 0689759002536
Priced and sold by the pieceSKU: MiniMe DSP P8W -
Home Audio, Open Box
MiniMe DSP P8W (Open-Box)
With the continued success of the MiniMe DSP series of home subwoofers, Earthquake felt that a smaller sibling was needed to help complement the line. The all-new MiniMe DSP P8 utilizes Earthquake’s unique Class D circuitry with over 90% efficiency and the added advantage of DSP control through mobile devices. Complicated and professional room tuning is now made possible at your fingertips through a mobile app, allowing users to tune the MiniMe DSP P8 for flexible subwoofer placement in any room. Like the 10, 12, and 15-inch models, the DSP P8 offers users some of the same great performance and features like 600 watts of brute peak power output, high-EMF XLT active driver, and redesigned 8-inch mass-tuned SLAPS-M8 passive radiator with increased excursion potential.
Without a doubt, the MiniMe DSP P8 is one the best 8-inch subwoofers ever produced by Earthquake and is sure to fill a small to medium-sized room with massive bass for the utmost in sound quality and intense room-rumbling sound effects. It is available in both black or white high gloss piano finishes and with the dual active and passive driver setup. With a compact 10-inch cube enclosure, don’t let the size of this little monster fool you. It offers users high performance and superb bass control with a dynamic, punchy, and precise sound even under hard and continuous operation. Transform your listening experience with the all-new MiniMe DSP P8 subwoofer.
SKU: MiniMe DSP P8W (B-Stock) -
Bluetooth Speakers, Bookshelf Speakers, DJ / Pro Audio, DJ/PA Monitors, Gaming AR/VR Audio, High Fidelity Speakers, Home Audio, Speakers, Studio Monitors, WiFi/Wireless
SM6BT
Bluetooth Speakers, Bookshelf Speakers, DJ / Pro Audio, DJ/PA Monitors, Gaming AR/VR Audio, High Fidelity Speakers, Home Audio, Speakers, Studio Monitors, WiFi/WirelessSM6BT
Experience unparalleled audio quality with the Earthquake SM6BT Professional Studio Monitor. Its bi-amplified Class AB architecture, 2-inch ribbon tweeter, and 6.5-inch carbon fiber cone woofer ensure studio-level sound. With flexible connectivity options and Bluetooth® v5.3 with True Wireless Stereo (TWS) pairing technology, the SM6BT is suitable for professional studios, home theaters, gaming systems, and more. It offers the perfect blend of professional-grade audio precision and everyday usability.
SKU: SM6BT -
Home Audio, Subwoofers, Supernova Series
Supernova MKVI DSP 12
12″ Powered Subwoofer with App-Controllable DSP
The Earthquake Supernova MKVI DSP 12 subwoofer is a perfect blend of advanced audio engineering and sophisticated DSP (Digital Signal Processing) technology, establishing a new standard for bass performance. This subwoofer series is crafted to offer an unmatched listening experience, providing the precision that audiophiles and home theater enthusiasts desire. With DSP integration, users gain exceptional control over sound output, allowing them to customize bass response to suit their room acoustics and personal taste. Whether you’re watching a movie, listening to music, or gaming, this subwoofer can adapt to deliver deep, clear, and impactful bass, enhancing every audio moment. Its robust build construction and cutting-edge features make it an excellent choice for those looking to enhance their audio system’s capabilities.
SKU: MKVI DSP 12 -
Home Audio, Subwoofers, Supernova Series
Supernova MKVI DSP 15
15″ Powered Subwoofer with App-Controllable DSP
The Earthquake Supernova MKVI DSP 15 subwoofer is a perfect blend of advanced audio engineering and sophisticated DSP (Digital Signal Processing) technology, establishing a new standard for bass performance. This subwoofer series is crafted to offer an unmatched listening experience, providing the precision that audiophiles and home theater enthusiasts desire. With DSP integration, users gain exceptional control over sound output, allowing them to customize bass response to suit their room acoustics and personal taste. Whether you’re watching a movie, listening to music, or gaming, this subwoofer can adapt to deliver deep, clear, and impactful bass, enhancing every audio moment. Its robust build construction and cutting-edge features make it an excellent choice for those looking to enhance their audio system’s capabilities.
SKU: MKVI DSP 15 -
Amplifiers, Home Audio
Supernova MKVI DSP Amplifier
Features
- 1500W dynamic and over 1000W RMS at 2Ω
- Advanced class D circuitry
- Fully balanced XLR input and output
- Low level RCA input and output
- Frequency Response: 18Hz–115Hz
- Crossover Frequency:40Hz–160Hz
- Continuously variable crossover with up to 48db/Oct slope
- Room correction with full DSP control
- Mono DSP output for sending processed signal to an additional subwoofer
- 3-way Auto/On/Off signal mode selector
- XLR/RCA input mode selector
- DSP On/Off selector
- Auto room tuning adjustments
- 0–180° phase adjustment selector
- IR remote and remote eye
- iWoofer™ Pro compatible
- DSP pairing via Bluetooth™
- 110V/220V AC selector
iWoofer Features
- XOver Control (6, 12, 18, 24, 30, 36, 42, and 48dB/Octave)
- Gain Control
- SHS Control
- Delay Control
- Phase Control (Variable phase with 1 degree increment from 0–180°)
- Limiter-Compressor Base Control
- Limiter-Compressor Detailed Control*
- Dynamic Bass Base Control
- Dynamic Bass Detailed Control*
- Remote Hardware Control
- Preset Manager
- Preset Import/Export Features
- Automated Room Correction*
- SPLMeter*
* iWoofer Pro Features Only
Dimensions
- H x W x D: 8.50″ (216mm) x 11.65″ (296mm) x 4.5″ (114mm)
- Depth includes knob protrusions and PCB boards
- Weight: 11.20 lbs (5.08 kgs)
- Weight includes the amplifier and transformer
Other Information
Model: MKVI DSP AMP
EAN: 0689759002345
Priced and sold by the pieceSKU: MKVI DSP AMP -
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
XJ-700DSP LFE Mono Amplifier
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home AudioXJ-700DSP LFE Mono Amplifier
Features
- High Power LFE Mono Block Subwoofer Amplifier
- App Controlled DSP (iWoofer™ Pro recommended)
- Amplifier Class: Class J
- Channels/Zones: 1
- Transformer Type: Toroidal Transformer
- Built-In Boundary Equalizer
- 0–180° Phase Adjustment
- DSP ON/OFF switch
- Movie/Music Mode Preset Button
- ON/AUTO/+12V Signal Sensing
Specifications
- Power Output:
- 1 x 700 WRMS @ 4-Ohm
- 1 x 400 WRMS @ 8-Ohm
- Frequency Response: 18Hz–160Hz
- Crossover Frequency: 40Hz–160Hz
- Output Connections:
- 5-Way Speaker Binding Posts
- RCA (DSP OUT)
- THD: < 0.02% (1W/4-Ohm)
- S/N:
- > 112dB (Balanced)
- > 108dB (Unbalanced)
- Load Impedance: 4 Ohm or greater
- Damping Factor: > 500
- Slew Rate: 50 V/ms
- Rack Mountable (1U space)
Note: The minimum rated impedance is 4-Ohm total. On the actual amp it specifies 4-Ohm minimum on each terminal. These terminals however operate as one meaning that you can either put a 4-Ohm load on one of them and none on the other OR put an 8-Ohm load on both of them resulting in a total impedance of 4-Ohm.
Dimensions
- H x W x D: 1.92″ (49mm) x 18″ (482.5mm) x 11.33″ (288mm)
- Includes feet, mounts, and protrusions
- Weight: 19.7 lbs (8.95 kgs)
Other Information
Model: XJ-700DSP
EAN: 0689759001973
Priced and sold by the pieceSKU: XJ-700DSP
