Home Audio
Showing 49–72 of 165 results
-
Home Audio, Outdoor/Indoor Speakers
Granite-52 Outdoor Speaker
ROCK-ON Series 5.25″ Outdoor Speaker – Pair
The Earthquake Sound Granite-52 outdoor speakers and Granite-10 subwoofer – part of the ROCK-ON outdoor speaker series, are specifically designed to imitate a rock appearance and easily blend in with any outdoor environment. Made with UV-treated, weather-resistant enclosure materials and durable epoxy resin construction, the ROCK-ON series Granite-52 speakers can withstand the demanding outdoor elements. The Granite-52 is a pair of rock speakers with a 5.25-inch woofer and a 0.5-inch tweeter. They serve as your left and right channels, have an amazing frequency response that is unmatched by any other rock speaker, and produce high-quality and accurate sound. The ROCK-ON Granite-10 subwoofer features a high-power crossover that reduces distortion and delivers pure sound. Also, Granite-10’s port is “S” shaped, so water cannot get trapped inside. The Granite-10 brings bass to your outdoor space, something that is greatly needed in today’s rock speaker market. Combined with the Granite-52 speakers, which have a matching finish, you can turn any backyard into an entertainment center.
SKU: GRANITE-52 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-1.5 High Speed HDMI Cable
Specifications
- 1.5ft (0.45m)
- Gold Plated Connectors
- Triple Shielded
- 4K X 2K Resolution Support
- HDMI Ethernet Cable (Eliminates the need of additional Ethernet cables to connect other internet-enabled HDMI devices in the network)
Audio Return Channel (enables two-way audio transmission between the A/V receiver and HDTV, eliminating the need of a separate audio cable) - Full 3D Support (defines common 3D formats and resolutions for HDMI-enabled devices, enabling 3D gaming and other 3D video applications)
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Sold by the piece
SKU: HD-1.5 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-12 High Speed HDMI Cable
Specifications
- 12ft (3.6m)
- Gold Plated Connectors
- Triple Shielded
- 4K X 2K Resolution Support
- HDMI Ethernet Cable (Eliminates the need of additional Ethernet cables to connect other internet-enabled HDMI devices in the network)
Audio Return Channel (enables two-way audio transmission between the A/V receiver and HDTV, eliminating the need of a separate audio cable) - Full 3D Support (defines common 3D formats and resolutions for HDMI-enabled devices, enabling 3D gaming and other 3D video applications)
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Sold by the piece
SKU: HD-12 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-20 High Speed HDMI Cable
Specifications
- 20ft (6.1m)
- Gold Plated Connectors
- Triple Shielded
- 4K X 2K Resolution Support
- HDMI Ethernet Cable (Eliminates the need of additional Ethernet cables to connect other internet-enabled HDMI devices in the network)
Audio Return Channel (enables two-way audio transmission between the A/V receiver and HDTV, eliminating the need of a separate audio cable) - Full 3D Support (defines common 3D formats and resolutions for HDMI-enabled devices, enabling 3D gaming and other 3D video applications)
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Sold by the piece
SKU: HD-20 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-3 High Speed HDMI Cable
Specifications
- 3ft (0.91m)
- Gold Plated Connectors
- Triple Shielded
- 4K X 2K Resolution Support
- HDMI Ethernet Cable (Eliminates the need of additional Ethernet cables to connect other internet-enabled HDMI devices in the network)
Audio Return Channel (enables two-way audio transmission between the A/V receiver and HDTV, eliminating the need of a separate audio cable) - Full 3D Support (defines common 3D formats and resolutions for HDMI-enabled devices, enabling 3D gaming and other 3D video applications)
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Sold by the piece
SKU: HD-3 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-RA HDMI Adapter (PAIR)
Specifications
- Right angled design prevents damage to home audio equipment
- Gold Plated Connectors
- Triple Shielded
- 4K Resolution Support
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Priced and sold by the pair
SKU: HD-RA (PAIR) -
Car Audio, DJ / Pro Audio, DJ/PA Monitors, Horns & Tweeters, Pro Sound, Tweeters
HDX2 Compression Horn Driver (PAIR)
Car Audio, DJ / Pro Audio, DJ/PA Monitors, Horns & Tweeters, Pro Sound, TweetersHDX2 Compression Horn Driver (PAIR)
Designed and engineered in the USA by Earthquake Sound, the 250 Watt 1-inch high-efficiency HDX2 Compression Horn Driver is recognized for its outstanding performance and sound quality. Sold in pairs, this driver is designed explicitly for medium band reproduction, making it perfect for midrange applications in SPL car audio systems or compact PA setups. The HDX2 features a universal 1-⅜” screw-on connection, allowing for the effortless integration of a horn. With its smooth frequency response and accurate high-frequency reproduction, this driver has become a favorite among audio enthusiasts.
Its robust diecast aluminum housing ensures durability and longevity, even under demanding conditions. The driver is crafted with precision components that minimize distortion, enhancing the clarity and richness of the audio output. Whether upgrading your vehicle’s audio system or setting up a PA system for an event, the HDX2 offers versatility and reliability. Its compact design does not compromise on power, delivering impressive sound that resonates with depth and detail. Audio professionals and hobbyists appreciate its ability to elevate sound experiences, making it a valuable addition to any audio setup.
SKU: HDX2 (PAIR) -
Accessories, Accessories, Accessories, Car Audio, Home Audio
HLLC-200 High/Low Level Converter
Features
- Reduces high power output of an amplifier to produce a low level input.
- Allows users to reduce the signal level down to a range 0.1 volts to 5 volts.
- Will not short the output
- Hi/low level converter
- 4-channel signal outputs
- Signal noise eliminator
- Adjustable output level
- Auto remote amplifier turn-on
- Great for leased vehicles
Applications
- Mobile Audio: Tap into the rear speakers to use their signal to power the high-level input.
- If you do not use differential input, you can burn your factory radio or head unit.
- Use the signal/music in the vehicle to generate a turn on power for a trunk mounted amplifier without running wires from the front all the way to the back.
- Home Audio: Add a subwoofer to your powered speakers by supplying the high level signal from them to the HLLC and set the pot to match the subwoofer.
- Pro Audio: Pair with Hum Kleaner for installations that have run distance of 20 ft and up to 200 ft. Hum Kleaner increases gain at the source and HLLC reduces the gain back down at the end of the run to amplifier input level.
Other Information
Model: HLLC-200
UPC: 0168975911032
Priced and sold by the pieceSKU: HLLC-200 -
Accessories, Accessories, Accessories, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
Hum Kleaner
Features
- Balanced XLR and TRS inputs and outputs
- Unbalanced RCA inputs and outputs
- Adjustable stereo balanced and unbalanced output level control
- Input selector switch
- Low noise, low distortion circuitry
- External 24V AC power supply included
Applications
- Home Audio
- Professional
- Recording Studios
- Live Music
- DJ/PA
- When signals need to be pushed long distances while retaining clarity
- Mixers
- Audio Processors
- Laptop Computers
- CD/DVD Players
- Gaming Consoles
- Powered Monitors
- Digital Workstations.
Specifications
- Gain range on RCA out = 1V MAX 12dBV
- Gain range on XLR out = 0dBV MAX 18dBV
- Input Gain Limit = 5VAC with MAX out
- RCS = 9VAC
- XLR = 18VAC
- Frequency Response: 20Hz–20kHz ±2dB
- Gain Separation: 80dB @ 1000Hz
- Input Impedance: Balanced: 20 kOhms / Unbalanced: 100 kOhms
- Output Impedance: Balanced: 100 Ohms / Unbalanced: 300 Ohms
- Maximum Gain Limit: 5 VAC
- Maximum Output
- RCA:9V
- XLR:18V
- TRS:18V
- Output Gain: 18dBV
- Signal to Noise Ratio: 114 dB @ full level
- THD: < .0003% @ 1kHz
Other Information
Model: Hum Kleaner
UPC: 0689759001676
Priced and sold by the piece
SKU: Hum Kleaner -
Open Box, Open Box, Open Box
Hum Kleaner (Open-Box)
Features
- Balanced XLR and TRS inputs and outputs
- Unbalanced RCA inputs and outputs
- Adjustable stereo balanced and unbalanced output level control
- Input selector switch
- Low noise, low distortion circuitry
- External 24V AC power supply included
Applications
- Home Audio
- Professional
- Recording Studios
- Live Music
- DJ/PA
- When signals need to be pushed long distances while retaining clarity
- Mixers
- Audio Processors
- Laptop Computers
- CD/DVD Players
- Gaming Consoles
- Powered Monitors
- Digital Workstations.
Specifications
- Gain range on RCA out = 1V MAX 12dBV
- Gain range on XLR out = 0dBV MAX 18dBV
- Input Gain Limit = 5VAC with MAX out
- RCS = 9VAC
- XLR = 18VAC
- Frequency Response: 20Hz–20kHz ±2dB
- Gain Separation: 80dB @ 1000Hz
- Input Impedance: Balanced: 20 kOhms / Unbalanced: 100 kOhms
- Output Impedance: Balanced: 100 Ohms / Unbalanced: 300 Ohms
- Maximum Gain Limit: 5 VAC
- Maximum Output
- RCA:9V
- XLR:18V
- TRS:18V
- Output Gain: 18dBV
- Signal to Noise Ratio: 114 dB @ full level
- THD: < .0003% @ 1kHz
Other Information
Model: Hum Kleaner
UPC: 0689759001676
Priced and sold by the pieceSKU: Hum Kleaner (B-Stock) -
Home Audio, Open Box
Imãge CM800 (Open-Box)
Features
- Paintable rust-proof grilles for superior protection and job flexibility
- Turn-N-Lock™ installation for safe, efficient, and professional installs
- PistonMax woofer design for more accurate mid-bass without distortion
- Long-life, moisture-resistant materials for safe use in kitchens, bathrooms, and atriums, .etc
- Butyl rubber surrounds
- Poly-mica injection cone woofer
- Easily integrates with the Imãge series in-wall, SweetSpot, and IQ Series in-ceiling speakers
- 3/4″ neodymium magnet dome tweeters with “On-Axis” – 180° positioning for better staging and imaging
- Long excursion bumped back plate with thick gauss magnet
- Easy connect spring-loaded binding posts
- Poly switch for tweeter protection
- Available in 6.5″ and 8″
Specifications
- Power Handling: 125W Max
- Frequency Response: 45Hz–21kHz
- Sensitivity: 89dB @ 1W/1M
- Impedance: 8-Ohm
Dimensions
- Overall Diameter: 11.41″ (290mm)
- Cutout Diameter: 9.75″ (246mm)
- Mounting Depth: 4.13″ (105mm)
Other Information
Model: Imãge CM800
EAN: 0068975900046
Priced and sold by the pairSKU: CM-800 (B-Stock) -
Amplifiers, Home Audio
IQ-1500 Plate Amplifier
Features
- Earthquake Class J circuitry
- XLR/RCA and high level input connections
- 20Hz, 30Hz, and 40Hz room equalization with 12dB range and boost
- Adjustable 24dB lowpass filter from 40Hz–200Hz with bypass
- 25Hz, 12dB/Oct switchable subsonic filter
- Full and advanced room correction
- IR input and remote control with volume control
- Auto signal sensing on/off switch
- Protection Circuitry:
- Short circuit
- Open circuit
- RF burnout
- Over temp
- Turn on/off transient protection
- DC protection
- Limiter circuitry
- Phase shift
- Phase Delay
- Custom flush mount design
- Dual gains internally mixed
- Channel and power status LEDs
- DC turn ON/OFF
- 110V/220V AC selector
Specifications
- Power Output:
- 3000 watts dynamic effect pinknoise
- 1 x 1500 watts RMS @ 2 Ohms Mono (1% distortion)
- 1 x 1100 watts RMS @ 4 Ohms Mono (1% distortion)
- 1 x 700 watts RMS @ 8 Ohms Mono ( 1% distortion)
- Frequency Response: 10–2kHz
- Load Impedance: 2 Ohm or greater
- Total Harmonic Distortion: <0.08% (1W/4)
- Slew Rate: 55V/microsecond
- Signal to Noise Ratio: > 106dB (balanced) 105dB (unbalanced) @ rated power
Dimensions
- Overall Dimensions: 11.65″ (296mm) x 8.5″ (216mm) x 3.84″ (mm)
- Plate thickness : 0.19″ (5mm)
- Cut Out Hole: 10.62″ (270mm) x 7.28″ (185mm)
- Transformer: 3.74″ (95mm) x 4.72″ (120mm) x 4.72″ (120mm)
- Weight: 26.04 lbs (12.2 kgs)
Other Information
Model: IQ-1500
UPC: 0068975900152
Priced and sold by the pieceSKU: IQ-1500 -
Home Audio, In-Wall & In-Ceiling Speakers
IQ6D
Features
- Edgeless design for seamless blend
- 6.5″ (133mm) low mass woven glass fiber cone woofer, dual voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C6
Specifications
- Power Handling: 25–300 Watts
- Frequency Response: 40Hz–21kHz
- Sensitivity: 93dB @ 1W/1M
- Impedance: Dual 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall Diameter with Grille: 9″ (228mm)
- Cut Out Diameter: 7.87″ (200mm)
- Mounting Depth: 3.75″ (94mm)
Other Information
Model: IQ6D
UPC: 0068975901302
Priced and sold by the pieceSKU: IQ6D -
Home Audio, In-Wall & In-Ceiling Speakers
IQ6S (Pair)
Features
- Edgeless design for seamless blend
- 6.5″ (133mm) low mass woven glass fiber cone woofer, single voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C6
Specifications
- Power Handling: 25–300 Watts
- Frequency Response: 40Hz–21kHz
- Sensitivity: 93dB @ 1W/1M
- Impedance: 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall Diameter with Grille: 9″ (228mm)
- Cut Out Diameter: 7.87″ (200mm)
- Mounting Depth: 3.75″ (94mm)
Other Information
Model: IQ6S
UPC: 0068975901296
Priced and sold by the pairSKU: IQ6S -
Home Audio, In-Wall & In-Ceiling Speakers
IQ8D
Features
- Edgeless design for a seamless blend
- 8″ (133mm) low mass woven glass fiber cone woofer, single voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C8
Specifications
- Power Handling: 35–400 Watts
- Frequency Response: 30Hz–21kHz
- Sensitivity: 91dB @ 1W/1M
- Impedance: 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall diameter: 10.59″ (269mm)
- Cut out diameter: 9.5″ (240mm)
- Mounting depth: 4.76″ (121mm)
Other Information
Model: IQ8D
UPC: 0068975901326
Priced and sold by the pieceSKU: IQ8D -
Home Audio, Open Box
IQ8S (Open-Box)
Features
- Edgeless design for seamless blend
- 8″ (133mm) low mass woven glass fiber cone woofer, single voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C8
Specifications
- Power Handling: 35–400 Watts
- Frequency Response: 30Hz–21kHz
- Sensitivity: 91dB @ 1W/1M
- Impedance: 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall diameter: 10.59″ (269mm)
- Cut out diameter: 9.5″ (240mm)
- Mounting depth: 4.76″ (121mm)
Other Information
Model: IQ8S
EAN: 0068975901319
Priced and sold by the pairPLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: IQ8S (B-Stock) -
Home Audio, In-Wall & In-Ceiling Speakers
IQ8S (Pair)
Features
- Edgeless design for seamless blend
- 8″ (133mm) low mass woven glass fiber cone woofer, single voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C8
Specifications
- Power Handling: 35–400 Watts
- Frequency Response: 30Hz–21kHz
- Sensitivity: 91dB @ 1W/1M
- Impedance: 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall diameter: 10.59″ (269mm)
- Cut out diameter: 9.5″ (240mm)
- Mounting depth: 4.76″ (121mm)
Other Information
Model: IQ8S
UPC: 0068975901319
Priced and sold by the pairSKU: IQ8S -
Accessories, Accessories, Car Audio, Home Audio
ISO-200
Specifications
- Eliminates Hum or Ground Loop Noise
- Unbalanced RCA to Balanced XLR Conversion
- XLR for balanced inputs and outputs
- RCA for unbalanced inputs and outputs
- 600Ω impedance industry standard
- Compact rugged construction
Dimensions
- Height: 3.32″ (84.33mm)
- Width: 2.91″ (74.00mm)
- Depth: 1.35″ (34.26mm)
Other Information
Model: ISO-200
UPS: 0689759001928
Priced and sold by the pieceSKU: ISO-200 -
Accessories, Amplifiers, Home Audio, WiFi/Wireless
IWS Stereo Balanced Preamp
Features
- 2-channel balanced output preamplifier
- Transport power and signal over Ethernet (PoE)
- Cat 5/6 support
- High Voltage Balanced Transport™
- Easy installation
- Multi-room solution
- Up to 200 feet noise-free audio
- Designed to work with Earthquake BTA-250 In-Wall Amplifier
Specifications
- Input: 3.5 mm stereo line in
- 12–24VDC power input
- Output: 4 volts balanced
- Power Range: 12–24VDC
- S/N: 105dBA
- Easy Installation
Other Information
Model: IWS
EAN: 0689759001843
Priced and sold by the pieceSKU: IWS -
Home Audio, Open Box
Limestone-10D (Open-Box)
Features
- UV treated and weather-resistant enclosure materials.
- Durable 15mm epoxy resin construction.
- Completely sealed speaker with butyl rubber surround, polypropylene cone, and polypropylene dust cap.
- Rock-like appearance and finish to easily blend in with any outdoor environment.
- “S” shaped port prevents water/moisture from entering and adds 3dB.
- Soft injection molded rubber spider for waterproofing and durability.
- Paintable enclosure to match any environment.
Specifications
- Woofer size: 10″
- Frequency Response: 30Hz–100Hz
- Power Handling: 250 WRMS / 400 Watts MAX
- Sensitivity: 92dB
- Impedance: 2 x 4-Ohm (Both coils are wired in series for a total impedance of 8-Ohms)
- Voice Coil Diameter: 2.5″ (63.5 mm)
- Surround Material: Butyl Rubber
- Cone material: Polypropylene
- Dust cap material: Polypropylene
- Enclosure Material: Epoxy Resin
Dimensions
- Height: 14″ (356 mm)
- Width: 18.5″ (570 mm)
- Depth: 21″ (534 mm)
Other Information
Model: Limestone-10D
EAN: 0068975900831
Priced and sold by the pieceSKU: LIMESTONE-10D (B-Stock) -
Home Audio, Outdoor/Indoor Speakers
Limestone-10D Outdoor Subwoofer
Features
- UV treated and weather-resistant enclosure materials.
- Durable 15mm epoxy resin construction.
- Completely sealed speaker with butyl rubber surround, polypropylene cone, and polypropylene dust cap.
- Rock-like appearance and finish to easily blend in with any outdoor environment.
- “S” shaped port prevents water/moisture from entering and adds 3dB.
- Soft injection molded rubber spider for waterproofing and durability.
- Paintable enclosure to match any environment.
Specifications
- Woofer size: 10″
- Frequency Response: 30Hz–100Hz
- Power Handling: 250 WRMS / 400 Watts MAX
- Sensitivity: 92dB
- Impedance: 2 x 4-Ohm (Both coils are wired in series for a total impedance of 8-Ohms)
- Voice Coil Diameter: 2.5″ (63.5 mm)
- Surround Material: Butyl Rubber
- Cone material: Polypropylene
- Dust cap material: Polypropylene
- Enclosure Material: Epoxy Resin
Dimensions
- Height: 14″ (356 mm)
- Width: 18.5″ (570 mm)
- Depth: 21″ (534 mm)
Other Information
Model: Limestone-10D
UPS: 0068975900831
Priced and sold by the pieceSKU: LIMESTONE-10D -
Home Audio, Open Box
Limestone-82 (Open-Box)
Features
- Completely sealed speaker with Santoprene surrounds, poly cones, and poly dust caps
- Woofer: 8″ (203mm)
- Tweeter: 1″ (25mm) Mylar
- UV treated and weather-resistant enclosure materials
- Durable epoxy resin construction
- Rock-like appearance and finish to easily blend in with any outdoor environment
Specifications
- RMS Power Rating: 20–250 Watts
- Frequency Response: 50Hz–21kHz
- Sensitivity: 93dB
- Impedance: 4-Ohm
- Enclosure: 15mm epoxy resin
- Finish: Limestone rock finish
Dimensions
- Height: 11.5″ (293mm)
- Width: 15″ (381mm)
- Depth: 11.75″ (299mm)
Other Information
Model: Limestone-82
EAN: 0068975900848
Priced and sold by the pieceSKU: LIMESTONE-82 (B-Stock) -
Home Audio, Outdoor/Indoor Speakers
Limestone-82 Outdoor Speaker
Features
- Completely sealed speaker with Santoprene surrounds, poly cones, and poly dust caps
- Woofer: 8″ (203mm)
- Tweeter: 1″ (25mm) mylar
- UV treated and weather-resistant enclosure materials
- Durable epoxy resin construction
- Rock-like appearance and finish to easily blend in with any outdoor environment
Specifications
- RMS Power Rating: 20–250 Watts
- Frequency Response: 50Hz–21kHz
- Sensitivity: 93dB
- Impedance: 4-Ohm
- Enclosure: 15mm epoxy resin
- Finish: Limestone rock finish
Dimensions
- Height: 11.5″ (293mm)
- Width: 15″ (381mm)
- Depth: 11.75″ (299mm)
Other Information
Model: Limestone-82
UPS: 0068975900848
Priced and sold by the pieceSKU: LIMESTONE-82
