Car Audio
Showing 49–72 of 146 results
-
Car Audio, Open Box
Magma-15X (Open-Box)
Specifications
- SWE 15″ Subwoofer
- 1500 Watt Max
- 700 Watt RMS
- 4 Ohm
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor in with the cold air and out with the hot air
- Super thick motor to assist long excursion – 2” thick
- PBP (Perforated Back Plate) that circulate cold air into the gap
SKU: Magma-15X (B-Stock) -
Car Audio, Open Box
MiNi D1000 1st Gen (Open-Box)
Features
- Clip Suppression technology
- Bridge-Link feature with two Mini D amplifiers (of same model)
- Fan free operation
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1000 Watts
- RMS Power
- RMS Power 1-Ohm: 600 Watts
- RMS Power 2-Ohm: 360 Watts
- RMS Power 4-Ohm: 180 Watts
- 0 – 12dB (30-80Hz) Bass Boost – available on the D2000 and D2500 models
- Variable Subsonic Filter
- 40-180Hz LPF (Low Pass Filter)
- Gain Control
- Remote Gain Level Control
- Fuse Rating: 40A (included)
Dimensions
- Dimensions (H x W x D): 1-7/8″ (48mm) x 7″ (177mm) x 6-5/16″ (160mm)
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000 1st Gen (B-Stock) -
Amplifiers, Car Audio
MiNi D1000 2nd Gen
Features
- Clip suppression technology to avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Bridge In/Out feature allows two MiNi D amplifiers (of same model) to be linked together for triple the output of a single unit.
- Fan free operation with stellar efficiency negates the need for noisy fans even when driven continuously 2db into clip.
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Power and Protection LED
- Variable Subsonic Filter
- Gain Level Control
- Remote Gain Level Control
- Remote base knob and cable (over 20ft) included.
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1200 Watts
- RMS Power:
- 600 Watts @ 1-Ohm
- 360 Watts @ 2-Ohm
- 180 Watts @ 4-Ohm
- Gain Level Control: 0.2V–5V RMS
- Low Pass Filter: 40Hz–180Hz
- Subsonic Filter: OFF–50Hz
- Frequency Adjustment: 30Hz–80Hz
- Bass Boost: 0–12dB
Dimensions
- HxWxD: 1.92″ (49mm) x 6.29″ (160mm) x 9.84″ (250mm)
Other Information
Model: MiNi D1000 2nd Gen
UPC: 0689759100683
Priced and sold by the pieceSKU: MiNi D1000 2nd Gen -
Car Audio, Open Box
MiNi D1000 2nd Gen (Open-Box)
Features
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Comes complete with remote base knob and cable (over 20ft)
- Power and Protection LED
- Variable Subsonic Filter
- Gain Control
- Remote Gain Level Control
- Clip Suppression Technology
- Bridge-Link
- Fan Free Operation
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1000 Watts
- RMS Power
- RMS Power 1-Ohm: 600 Watts
- RMS Power 2-Ohm: 360 Watts
- RMS Power 4-Ohm: 180 Watts
- 0–12dB (30–80Hz) Bass Boost
- 40–180Hz LPF (Low Pass Filter)
Dimensions
- (H x W x D): 1-15/16″ (49mm) x 6-5/16″ (160mm) x 9-7/8″ (250mm)
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000 2nd Gen (B-Stock) -
Car Audio, Open Box
MiNi D1000.4 1st Gen (Open-Box)
Features
- Clip suppression technology to avoid hard clipping
- Fan free operation with stellar efficiency negates the need for noisy fans
- User selectable high and low pass crossovers with variable crossover frequency
- Boost function, enables up to 12 dB boost of the chosen crossover frequency
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 1000 Watts
- RMS Power:
- 4 x 65W @ 4-Ohm
- 4 x 90W @ 2-Ohm
- 2 x 190W @ 4-Ohm Bridged
- Channel Separation: 80dB
- Crossover Frequencies: 40–400Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 2 x 20A (included)
Dimensions
(H x W x D): 1-7/8″ (48mm) x 7-1/16″ (180.5mm) x 6-5/16″
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000.4 1st Gen (B-Stock) -
Amplifiers, Car Audio
MiNi D1000.4 2nd Gen
Introducing the MiNi D1000.4 2nd Gen, the ultimate 4-channel full-range amplifier of the MiNi D series. This compact powerhouse redefines car amplifier technology with its micro-sized chassis, equipped with Earthquake’s innovative Power Chip technology. Delivering robust and cool running power, the MiNi D1000.4 sets a new standard for efficiency and performance in the industry.
Engineered by Earthquake’s chief engineer, Joseph Sahyoun, this class D amplifier represents a leap into the future of car audio technology. Designed to be smaller, stronger, and smarter, the MiNi D1000.4 is a true next-gen amplifier that outshines the competition with its sophistication and cutting-edge features. With a focus on decreasing size without compromising power, Earthquake has achieved an unprecedented power density level, setting a new benchmark for amplifiers of its kind.
SKU: MiNi D1000.4 2nd Gen -
Car Audio, Open Box
MiNi D1000.4 2nd Gen (Open-Box)
Features
- Clip Suppression technology to avoid hard clipping
- Fan free operation with stellar efficiency negates the need for noisy fans
- User selectable high and low pass crossovers with variable crossover frequency
- Boost function, enables up to 15dB boost of the chosen crossover frequency
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 1000 Watts
- RMS Power:
4 x 85W @ 4-Ohm
4 x 120W @ 2-Ohm
2 x 200W @ 4-Ohm Bridged - Frequency Response: 20–20kHz
- Signal-to-Noise Ratio: >100dB
- Bass Boost: 0–15dB
- THD+N: < 1%
- Fuse Rating: 1 x 60A (included)
Dimensions
- (H x W x D): 1-15/16″ (48.5mm) x 7-15/16″ (202mm) x 6-15/16″ (160mm)
SKU: MiNi D1000.4 2nd Gen (B-Stock) -
Car Audio, Open Box
MiNi D1500.2 1st Gen (Open-Box)
Specifications
- Channels: 2
- Class: Digital Class “D”
- Max Power: 1500 Watts
- RMS Power:
2 x 130W @ 4-Ohm
2 x 180W @ 2-Ohm
1 x 360W @ 4-Ohm Bridged - Channel Separation: 80dB
- Crossover Frequencies: 20 – 500Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 2 x 30A (included)
- Dimensions (H x W x D): 2-1/16″ (52mm) x 8″ (202.5mm) x 8-1/4″ (210mm)
SKU: MiNi D1500.2 1st Gen (B-Stock) -
Car Audio, Open Box
MiNi D2000 1st Gen (Open-Box)
Specifications
- Channels: 1 (MONO)
- Class: Digital Class “D”
- Max Power: 2000 Watts
- RMS Power:
1200 Watts @ 1-Ohm
1000 Watts @ 2-Ohm
650 Watts @ 4-Ohm - Fuse Rating: 80A (required)
- Dimension (H x W x D): 1-7/8″ (48mm) x 8-1/4″ (286mm) x 6-5/16″ (160mm)
SKU: MiNi D2000 1st Gen (B-Stock) -
Amplifiers, Car Audio
MiNi D2000 2nd Gen
Features
- Clip suppression technology to avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Bridge In/Out feature allows two MiNi D amplifiers (of same model) to be linked together for triple the output of a single unit.
- Fan free operation with stellar efficiency negates the need for noisy fans even when driven continuously 2db into clip.
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Power and Protection LED
- Variable Subsonic Filter
- Gain Level Control
- Remote Gain Level Control
- Remote base knob and cable (over 20ft) included.
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 2000 Watts
- RMS Power:
- 1200 Watts @ 1-Ohm
- 1000 Watts @ 2-Ohm
- 650 Watts @ 4-Ohm
- Gain Level Control: 0.2V–5V RMS
- Low Pass Filter: 40Hz–180Hz
- Subsonic Filter: OFF–50Hz
- Frequency Adjustment: 30Hz–80Hz
- Bass Boost: 0–12dB
Dimensions
- HxWxD: 1.92″ (49mm) x 6.29″ (160mm) x 10.55″ (268mm)
Other Information
Model: MiNi D2000 2nd Gen
UPC: 0689759100690
Priced and sold by the pieceSKU: MiNi D2000 2nd Gen -
Car Audio, Open Box
MiNi D2500 (Open-Box)
Specifications
- Channels: 1 (MONO)
- Class: Digital Class “D”
- Max Power: 2000 Watts
- RMS Power:
2000 Watts @ 1-Ohm
1800 Watts @ 2-Ohm
850 Watts @ 4-Ohm - Fuse Rating: 100A (required)
- Dimensions (H x W x D): 1-7/8″ (48mm) x 12-13/16″ (325mm) x 6-5/16″ (160mm)
SKU: MiNi D2500 (B-Stock) -
Amplifiers, Car Audio
MiNi D2500 2nd Gen
Features
- Clip suppression technology to avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Bridge In/Out feature allows two MiNi D amplifiers (of same model) to be linked together for triple the output of a single unit.
- Fan free operation with stellar efficiency negates the need for noisy fans even when driven continuously 2db into clip.
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Power and Protection LED
- Variable Subsonic Filter
- Gain Level Control
- Remote Gain Level Control
- Remote base knob and cable (over 20ft) included.
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 2500 Watts
- RMS Power:
- 2000 Watts @ 1-Ohm
- 1800 Watts @ 2-Ohm
- 850 Watts @ 4-Ohm
- Gain Level Control: 0.2V–5V RMS
- Low Pass Filter: 40Hz–180Hz
- Subsonic Filter: OFF–50Hz
- Frequency Adjustment: 30Hz–80Hz
- Bass Boost: 0–12dB
Dimensions
- HxWxD: 1.92″ (49mm) x 6.29″ (160mm) x 13.54″ (344mm)
Other Information
Model: MiNi D2500 2nd Gen
UPC: 0689759100706
Priced and sold by the pieceSKU: MiNi D2500 2nd Gen -
Amplifiers, Car Audio
MiNi D3000.4
Features
- Clip Suppression technology. The Mini D will avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Fan free operation. The stellar efficiency of the Mini D negates the need for noisy fans. Even when driven continuously 2db into clip the Mini D will not overheat.
- Variable Subsonic filter option to protect speakers from unwanted low frequency content.
- Auto ON signal sensing switch. Amplifier can wake up on signal and fall asleep when not in use.
- RCA line outputs for daisy chaining multiple amplifiers.
- User selectable high & low pass crossovers with variable crossover frequency.
- MARS status LED. Lights up when MARS has detected an anomaly and when the unit is initially powered up and going through self analyzing mode.
Specifications
- Channels: 4
- Class: Digital Class D
- Max Power: 3000 Watts
- RMS Power:
- 4 x 130W @ 4-Ohm
- 4 x 180W @ 2-Ohm
- 2 x 360W @ 4-Ohm bridged
- Channel Separation: 90dB
- Subsonic Filter: 15–30Hz
- Crossover Frequencies: 20–500Hz
- THD+N: 0.01%
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 3 x 35A (included)
Dimensions
- HxWxD: 2.04″ (52mm) x 11.61″ (295mm) x 8.34″ (212mm)
Other Information
Model: MiNi-D3000.4
UPC: 0168975911070
Priced and sold by the pieceSKU: MiNi D3000.4 -
Car Audio, Open Box
MiNi D3000.4 1st Gen (Open-Box)
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 3000 Watts
- RMS Power:
4 x 130W @ 4-Ohm
4 x 180W @ 2-Ohm
2 x 360W @ 4-Ohm bridged - Channel Separation: 90dB
- Crossover Frequencies: 20 – 500Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 3 x 35A (included)
- Dimensions (H x W x D): 2-1/16″ (52mm) x 11-5/8″ (295mm) x 8-5/16″ (212mm)
SKU: MiNi D3000.4 1st Gen (B-Stock) -
Amplifiers, Car Audio
MiNi D3000.4 2nd Gen
Features
- Clip suppression technology to avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Fan free operation negates the need for noisy fans even when driven continuously 2db into clip the Mini D will not overheat.
- ST or 4CH input switch for using the amp in either 2 channel or 4 channel operation.
- Auto ON signal sensing allows the amplifier to wake up on signal and fall asleep when not in use.
- User selectable high & low pass crossovers with variable crossover frequency.
- High and low pass multiplier button offers users great flexibility for a variety of wiring configurations.
- MARS status LED lights up when it has detected an anomaly and when the unit is initially powered up and going through self analyzing mode.
Specifications
- Number of Channels: 4
- Class: Digital Class D
- Max Power: 3000 Watts
- RMS Power:
- 4 x 120W @ 4-Ohm
- 4 x 200W @ 2-Ohm
- 2 x 300W @ 4-Ohm bridged
- Gain Level Control: 0.2V–6V RMS
- Channel Separation: > 90dB
- THD+N: < 1%
- Crossover Frequencies:
- High Pass Filter: 20Hz–400Hz
- x10 Button Engaged: 200Hz–4kHz
- Low Pass Filter: 50Hz–500Hz
- x10 Button Engaged: 500Hz–5kHz
- High Pass Filter: 20Hz–400Hz
- Signal-to-Noise Ratio: 98dB
- Fuse Rating: 2 x 40A (included)
- F and R RCA Line Inputs
- HPF/Flat/BPF Filter Switch
- Power and protection LED indicators
Dimensions
- H x W x D: 2.48″ (63mm) x 11.22″ (285mm) x 8.26″ (210mm)
- Width includes mounting feet
Other Information
Model: MiNi-D3000.4 2nd Gen
UPC: 0689759101079
Priced and sold by the pieceSKU: MiNi D3000.4 2nd Gen -
Car Audio, Open Box
MiNi D3000.4 2nd Gen (Open-Box)
Features
- Clip suppression technology to avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Fan free operation negates the need for noisy fans even when driven continuously 2db into clip the Mini D will not overheat.
- ST or 4CH input switch for using the amp in either 2 channel or 4 channel operation.
- Auto ON signal sensing allows the amplifier to wake up on signal and fall asleep when not in use.
- User selectable high & low pass crossovers with variable crossover frequency.
- High and low pass multiplier button offers users great flexibility for a variety of wiring configurations.
- MARS status LED lights up when it has detected an anomaly and when the unit is initially powered up and going through self analyzing mode.
Specifications
- Number of Channels: 4
- Class: Digital Class D
- Max Power: 3000 Watts
- RMS Power:
- 4 x 120W @ 4-Ohm
- 4 x 200W @ 2-Ohm
- 2 x 300W @ 4-Ohm bridged
- Gain Level Control: 0.2V–6V RMS
- Channel Separation: > 90dB
- THD+N: < 1%
- Crossover Frequencies:
- High Pass Filter: 20Hz–400Hz
- x10 Button Engaged: 200Hz–4kHz
- Low Pass Filter: 50Hz–500Hz
- x10 Button Engaged: 500Hz–5kHz
- High Pass Filter: 20Hz–400Hz
- Signal-to-Noise Ratio: 98dB
- Fuse Rating: 2 x 40A (included)
- F and R RCA Line Inputs
- HPF/Flat/BPF Filter Switch
- Power and protection LED indicators
Dimensions
- H x W x D: 2.48″ (63mm) x 11.22″ (285mm) x 8.26″ (210mm)
- Width includes mounting feet
Other Information
Model: MiNi-D3000.4 2nd Gen
EAN: 0689759101079
Priced and sold by the pieceSKU: MiNi D3000.4 2nd Gen-(B-Stock) -
Accessories, Car Audio
NG-2000 Noise Gate
Specifications
- RCA inputs and outputs
- Remote power connector
- Gate open LED indicator
- Power LED indicator
- Threshold level adjustment
- Expansion ration adjustment
PLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: NG-2000 -
Amplifiers, Car Audio
PowerHouse Shredder PHS3500.1
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Power Output:
- 4000 WRMS @ 1Ω / 1% THD
- 2700 WRMS @ 2Ω / 1% THD
- 1700 WRMS @ 4Ω / 1% THD
- Frequency Response: 15Hz–20kHz
- High Pass Filter: 15Hz–80Hz
- Low Pass Filter: 80Hz–20kHz
- Bass Boost Range: 35Hz–70Hz
- Bass Boost Level: 0–12dB
- Gain Min/Max: 5V–0.2V
- Signal-to-Noise Ratio: 90dB
- Efficiency: 99%
- Output Noise: 16mV
- Full Rated Power Current Draw: 235A Gain At Max
- Power, protection, and clip LED indicators
- Comes complete with remote base knob and cable (over 20ft)
- Fuse Rating: 1Ω 200A / 2Ω 150A / 4Ω 100A
- Minimum Wire Gauge Size: 1Ω 1 Gauge / 2Ω 2 Gauge / 4Ω 4–2 Gauge
Dimensions
- (H x W x D): 2.58″ (65mm) x 8.30″ (211mm) x 8.99″ (288mm)
- Weight: 5.72 lbs (2.59 kgs)
Other Information
Model: PHS3500.1
UPC: 0689759002314
Priced and sold by the pieceSKU: PHS3500.1 -
Amplifiers, Car Audio
PowerHouse Shredder PHS5000.1
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Power Output:
- 5500 WRMS @ 1Ω / 1% THD
- 3500 WRMS @ 2Ω / 1% THD
- 1850 WRMS @ 4Ω / 1% THD
- Frequency Response: 15Hz–20kHz
- High Pass Filter: 15Hz–80Hz
- Low Pass Filter: 80Hz–20kHz
- Bass Boost Range: 35Hz–70Hz
- Bass Boost Level: 0–12dB
- Gain Min/Max: 5V–0.2V
- Signal-to-Noise Ratio: 90dB
- Efficiency: 99%
- Output Noise: 16mV
- Full Rated Power Current Draw: 378A Gain At Max
- Power, protection, and clip LED indicators
- Comes complete with remote base knob and cable (over 20ft)
- Fuse Rating: 1Ω 250A / 2Ω 175A / 4Ω 150A
- Minimum Wire Gauge Size: 1Ω 1 Gauge / 2Ω 2 Gauge / 4Ω 4–2 Gauge
Dimensions
- (H x W x D): 2.58″ (65mm) x 11.5″ (292mm) x 8.99″ (228mm)
- Weight: 8.12 lbs (3.68 kgs)
Other Information
Model: PHS5000.1
UPC: 0689759002321
Priced and sold by the pieceSKU: PHS5000.1 -
Amplifiers, Car Audio
PowerHouse Shredder PHS8000.1
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Power Output:
- 9000 WRMS @ 1Ω / 1% THD
- 5800 WRMS @ 2Ω / 1% THD
- 3300 WRMS @ 4Ω / 1% THD
- Frequency Response: 15Hz–20kHz
- High Pass Filter: 15Hz–80Hz
- Low Pass Filter: 80Hz–20kHz
- Bass Boost Range: 35Hz–70Hz
- Bass Boost Level: 0–12dB
- Gain Min/Max: 5V–0.2V
- Signal-to-Noise Ratio: 90dB
- Efficiency: 99%
- Output Noise: 16mV
- Full Rated Power Current Draw: 608A Gain At Max
- Power, protection, and clip LED indicators
- Comes complete with remote base knob and cable (over 20ft)
- Fuse Rating: 1Ω 400A / 2Ω 250A / 4Ω 200A
- Minimum Wire Gauge Size: 1Ω 1 Gauge / 2Ω 2 Gauge / 4Ω 4–2 Gauge
Dimensions
- (H x W x D): 2.58″ (65mm) x 14.87″ (378mm) x 8.99″ (228mm)
- Weight: 11.34 lbs (5.14 kgs)
Other Information
Model: PHS8000.1
UPC: 0689759002338
Priced and sold by the pieceSKU: PHS8000.1 -
Car Audio, DJ / Pro Audio, DJ Speakers, DJ/PA Monitors, Home Audio, Pro Sound, Subwoofers, Subwoofers
Pro-X128 (PAIR)
Car Audio, DJ / Pro Audio, DJ Speakers, DJ/PA Monitors, Home Audio, Pro Sound, Subwoofers, SubwoofersPro-X128 (PAIR)
Features
- High efficiency and high sensitivity
- Multi roll accordion type UV treated cloth surround
- Thin pressed paper cone woofer
- 4″ high power PWT (Parallel Winding Technology) voice coil
- NOMEX/ROMEX progressive spider
- Die cast basket with jet-black finish
- L-RAE (Large Radial Air Emitter) cooling system
- High gauss ceramic magnet
- Bumped back extended pole piece
- Spring loaded push on terminals
Specifications
- Driver Size 12″
- Power Handling:
- 600 WRMS
- 1200 Watts MAX
- Nominal Impedance: 8-Ohm
- Voice Coil Diameter: 4″ (101.6mm)
- Sensitivity: 96dB SPL @ 1W/1M
Dimensions
- Overall Diameter: 12.25″ (312mm)
- Motor Diameter: 8.66″ (220mm)
- Cutout Diameter: 11.18″ (284mm)
- Mounting Depth: 4.80″ (122mm)
Parameters
- Free Air Resonance (Fs): 49Hz
- Electrical “Q” Qes: 0.362
- Mechanical “Q” Qms: 7.619
- Total “Q” Qts: 0.345
- Revc: 6-Ohm
- BL: 19.453TM
- Vas: 66 L / 2.34 ft3
- Xmax: 0.5″ (12.7mm)
Other Information
Model: Pro-X128
UPC: 0168975910875
Priced and sold by the pairSKU: Pro-X128