HOME AUDIO
-
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P-15
Features
- Built-in high-efficiency Class D amplifier
- Premium 15″ high-EMF XLT active driver
- Non-pressed fiber cone
- Inverted edge reinforced poly dust cap
- Wide polyether foam surround
- Double-stacked ferrite magnet motor assembly
- Dual-layered 3″ voice coil with Kapton former
- 15″ patented SLAPS-15v2 passive radiator system
- Built-in Digital Signal Processor (DSP) for enhanced bass performance
- Automatic signal-sensing
- Auto room correction (iWoofer™ Pro only)
- 3-way Auto/On/Off mode switch
- DSP On/Off selector switch
- Sub-Harmonic Synthesizer (SHS)
- Selective variable crossover
- Operation status LED light
- Inputs:
- Low-level RCA
- Balanced XLR
- Outputs:
- Low-level RCA Mono DSP
- Balanced XLR Mono DSP
- XLR and RCA input selector switch
- High gloss black piano finish
- Remote and remote eye included
- Grilles included
Specifications
- Built-in high-efficiency Class D amplifier
- 1000 Watts MAX
- Frequency Response: 18Hz–115Hz
- Crossover Frequency: 40Hz–160Hz
- Dual 3″ (76mm) diameter Kapton voice coil
- Nominal Impedance: Dual 4 Ohm
- 0–180° Phase Adjustment Switch
Dimensions
- H x W x D: 18″ (458mm) x 17.6″ (448mm) x 21.25″ (540mm)
- Weight: 75 lbs (34 kgs)
Other Information
Model: MiniMe DSP P-15
EAN: 0689759001935
Priced and sold by the pieceSKU: MiniMe DSP P15 -
Home Audio, MiniMe Series, Subwoofers
MiniMe DSP P63B
Ultra-Compact Powered Subwoofer with Digital Signal Processing
The Earthquake MiniMe DSP P63 subwoofer is a groundbreaking powerhouse that merges innovative design and state-of-the-art technology to provide an outstanding audio experience. Redefining possibilities in a small size, this subwoofer boasts a sleek, compact enclosure design, high peak power, and advanced features such as digital signal processing (DSP). Equipped with a 6.5-inch inverted active driver and dual opposing 6.5-inch passive bass radiators, all housed in a sleek 9-inch cubed enclosure, the MiniMe DSP P63 showcases a patented design that enhances performance by increasing sound-radiating surface area and system efficiency. The MiniMe DSP P63 provides clean, impactful bass without sacrificing valuable floor space.
SKU: MINIME DSP P63B -
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile Transducers
MQB-HTK2 Bass Shaker Kit
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile TransducersMQB-HTK2 Bass Shaker Kit
An Immersive Audio Experience Awaits
Tactile transducers, called “bass shakers,” are designed to transmit subsonic bass frequencies that can be felt and heard. By mounting the device on a couch or chair, the vibrations produced can be transferred to the body, providing a tactile sound experience. In some cases, tactile transducers can even replace traditional subwoofers, especially when headphones may be necessary to avoid disturbing others. Tactile transducers can be connected to the LFE output, which is also used by conventional subwoofers. These devices are powered by an amplifier, such as the Class J XJ-300ST, that provides a powerful and precise low-frequency effect. The tactile transducer seamlessly integrates and enhances the audio experience when paired with an existing subwoofer.
Note: The MQB-HTK2 kit comes with one XJ-300ST amplifier and two MQB-1 Tactile Transducers.
SKU: MQB-HTK2 -
Bluetooth Speakers, Bookshelf Speakers, DJ / Pro Audio, DJ/PA Monitors, Gaming AR/VR Audio, High Fidelity Speakers, Home Audio, Speakers, Studio Monitors, WiFi/Wireless
SM6BT (PIECE)
Bluetooth Speakers, Bookshelf Speakers, DJ / Pro Audio, DJ/PA Monitors, Gaming AR/VR Audio, High Fidelity Speakers, Home Audio, Speakers, Studio Monitors, WiFi/WirelessSM6BT (PIECE)
Experience unparalleled audio quality with the Earthquake SM6BT Professional Studio Monitor. Its bi-amplified Class AB architecture, 2-inch ribbon tweeter, and 6.5-inch carbon fiber cone woofer ensure studio-level sound. With flexible connectivity options and Bluetooth® v5.3 with True Wireless Stereo (TWS) pairing technology, the SM6BT is suitable for professional studios, home theaters, gaming systems, and more. It offers the perfect blend of professional-grade audio precision and everyday usability.
SKU: SM6BT -
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio
Cinénova 12
The Earthquake Cinénova 12 is a highly versatile 12-channel amplifier that provides exceptional sound quality and performance. Offering flexibility with 12 channels across 6 stereo zones, this amplifier showcases a sleek design, user-friendly interface, and advanced protection features. Noteworthy for its exceptional flexibility and customization, it caters to the diverse needs of audio enthusiasts and integrators, making it ideal for home theater and distributed audio systems. With a focus on value, performance, and adaptability, the Cinénova 12 is positioned as a premier option in the multi-room audio market.
SKU: Cinenova 12 -
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/Wireless
BT5.3NC
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/WirelessBT5.3NC
The Earthquake 2-in-1 BT5.3NC Bluetooth Audio Adapter serves as a transmitter or receiver that exhibits low distortion, low power consumption, low latency, and high-fidelity sound with stereo compatibility. Whether you seek wireless music streaming or hands-free communication, the BT5.3NC is the solution, as it seamlessly integrates with a broad range of audio systems, catering to both fixed home and portable audio setups. With its built-in microphones and noise-cancellation technology, you will enjoy crystal-clear calls from a distance at the touch of a button. Embrace the freedom, convenience, and portability of the Earthquake BT5.3NC, your ultimate audio companion.
SKU: BT5.3NC
CAR AUDIO
-
Car Audio, Subwoofers
SWS-8Xi Shallow Woofer System
SWS – The OG Shallow Woofer Design
The SWS-8Xi is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 8-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability.
SKU: SWS-8Xi -
Car Audio, Subwoofers
X84SWS Shallow Woofer System
SWS – The OG Shallow Woofer Design
The X84SWS is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 8-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability. The Earthquake 8-inch SWS was initially designed for BMW’s concealed subwoofers positioned under the seats, delivering accurate and deep bass frequencies directly to the listener’s seating area. This setup enhances response time due to its proximity, offering a more immersive listening experience.SKU: X84SWS -
Bundles, Car Audio, Enclosures
RB1-TX10-BB
RB1-TX10 Vented Enclosure
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with in-house CNC machining to ensure quality and control.
- Vented port for extended low frequency response and maximum output.
- Black spray-on polyurethane bed liner material is applied to all enclosures for durability and chipping resistance.
- Rectangular-shaped enclosure design.
- Pre-installed gold-plated wire terminals are included.
TremorX-104 Features
- Heavy-duty stitched leads
- Spring loaded terminals
- Anti-wobble cone construction
- TCT Technology (Turbine Cooled Transducer) for high-efficiency output
- XLT chassis geometry allows for extra length between the spider and the magnetic gap
- Wide edge suspension for significant excursion without deformation or increased mechanical resistance
- Military-grade single voice coil
Specifications
- 10 in. Subwoofer
- Power Handling:
- 300W RMS, 1000W Max
- Impedance: 4-Ohm
- Efficiency (lW/lM): 86.4345 dB
- One-way linear excursion: 1 in. / 25.4 mm
Dimensions
- HxWxD: 12.00 in. (304.80 mm) x 15.50 in. (393.70 mm) x 13.50 in. (349.90 mm)
- Cutout Diameter: Ø 9.00 in. (228.60 mm)
- Port Inlet H x W: 10.50 in. (266.70 mm) x 2.50 in. (63.50 mm)
Parameters
- Free Air Resonance (Fo): 30.9749 Hz
- Electrical “Q” (Qes): 0.372
- Mechanical “Q” (Qms): 5.1194
- Total Speaker “Q” (Qts): 0.3468
- Effective Piston Area (Sd): 0.0289 m2
- Revc=Ohm: 3.5
- Mmd=g: 101.3326
- Mms=g: 104.156
- Cms=uM/N: 177.886
- Vas=ft3: 0.7493971 ft3
- BL=T·M: 15.0886
- No=%: 0.2764564
MiNi D1000 2nd Gen Features
- Clip suppression technology to avoid hard clipping so the sound will not get harsh in the event of excessive input.
- Bridge In/Out feature allows two MiNi D amplifiers (of the same model) to be linked together for triple the output of a single unit.
- Fan-free operation with stellar efficiency negates the need for noisy fans even when driven continuously 2db into clip.
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Power and Protection LED
- Variable Subsonic Filter
- Gain Level Control
- Remote Gain Level Control
- Remote base knob and cable (over 20ft) included.
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1200W
- RMS Power:
- 600 Watts @ 1-Ohm
- 360 Watts @ 2-Ohm
- 180 Watts @ 4-Ohm
- Gain Level Control: 0.2V–5V RMS
- Low Pass Filter: 40Hz–180Hz
- Subsonic Filter: OFF–50Hz
- Frequency Adjustment: 30Hz–80Hz
- Bass Boost: 0–12dB
Dimensions
- Dimensions (H x W x D): 1.92 in. (49 mm) x 6.29 in. (160 mm) x 9.84 in. (250 mm)
AK-5000
- Red Power: Wire 17 ft (5.18m) 8-Gauge
- Black Ground Wire: 3 ft (0.9m) 8-Gauge
- Speaker Wire: 20 ft (6.1m) 16-Gauge
- Blue Remote Turn ON Wire: 16 ft (4.8m) 16-Gauge
- Silver Twisted-Pair RCA Interconnect: 18 ft (5.5m) Straight
- Black Split Loom: 6 ft (1.83m) OD 8mm
- Gold Plated ANL Fuse Holder: ANL Fuse 150 A
- 4 x 4-Gauge Ring Terminals: 3 red/1 black
- 2 x 4-Gauge Spade Terminals: 1 red/1 black
- 5 x 16-Gauge Fork Terminals: 3 red/2 black
- 4 x 16-Gauge Female Disconnects: 2 red/2 black
- 1 x 16-22-Gauge Butt Connector for Remote Turn-ON Wire: 1 red
- 1 x Self-Tapping Screw: 1 tinned
- 10 x Black Cable Ties, 120mm long
- 1 x Grommets in Black
Other Information
Model: RB1-TX10-BB
EAN: 0689759101611
Priced and sold by the setSKU: RB1-TX10-BB -
Amplifiers, Car Audio
PowerHouse Shredder PHS3500.1
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Power Output:
- 4000 WRMS @ 1Ω / 1% THD
- 2700 WRMS @ 2Ω / 1% THD
- 1700 WRMS @ 4Ω / 1% THD
- Frequency Response: 15Hz–20kHz
- High Pass Filter: 15Hz–80Hz
- Low Pass Filter: 80Hz–20kHz
- Bass Boost Range: 35Hz–70Hz
- Bass Boost Level: 0–12dB
- Gain Min/Max: 5V–0.2V
- Signal-to-Noise Ratio: 90dB
- Efficiency: 99%
- Output Noise: 16mV
- Full Rated Power Current Draw: 235A Gain At Max
- Power, protection, and clip LED indicators
- Comes complete with remote base knob and cable (over 20ft)
- Fuse Rating: 1Ω 200A / 2Ω 150A / 4Ω 100A
- Minimum Wire Gauge Size: 1Ω 1 Gauge / 2Ω 2 Gauge / 4Ω 4–2 Gauge
Dimensions
- (H x W x D): 2.58″ (65mm) x 8.30″ (211mm) x 8.99″ (288mm)
- Weight: 5.72 lbs (2.59 kgs)
Other Information
Model: PHS3500.1
UPC: 0689759002314
Priced and sold by the pieceSKU: PHS3500.1 -
Amplifiers, Car Audio
PowerHouse Shredder PHS5000.1
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Power Output:
- 5500 WRMS @ 1Ω / 1% THD
- 3500 WRMS @ 2Ω / 1% THD
- 1850 WRMS @ 4Ω / 1% THD
- Frequency Response: 15Hz–20kHz
- High Pass Filter: 15Hz–80Hz
- Low Pass Filter: 80Hz–20kHz
- Bass Boost Range: 35Hz–70Hz
- Bass Boost Level: 0–12dB
- Gain Min/Max: 5V–0.2V
- Signal-to-Noise Ratio: 90dB
- Efficiency: 99%
- Output Noise: 16mV
- Full Rated Power Current Draw: 378A Gain At Max
- Power, protection, and clip LED indicators
- Comes complete with remote base knob and cable (over 20ft)
- Fuse Rating: 1Ω 250A / 2Ω 175A / 4Ω 150A
- Minimum Wire Gauge Size: 1Ω 1 Gauge / 2Ω 2 Gauge / 4Ω 4–2 Gauge
Dimensions
- (H x W x D): 2.58″ (65mm) x 11.5″ (292mm) x 8.99″ (228mm)
- Weight: 8.12 lbs (3.68 kgs)
Other Information
Model: PHS5000.1
UPC: 0689759002321
Priced and sold by the pieceSKU: PHS5000.1 -
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/Wireless
BT5.3NC
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/WirelessBT5.3NC
The Earthquake 2-in-1 BT5.3NC Bluetooth Audio Adapter serves as a transmitter or receiver that exhibits low distortion, low power consumption, low latency, and high-fidelity sound with stereo compatibility. Whether you seek wireless music streaming or hands-free communication, the BT5.3NC is the solution, as it seamlessly integrates with a broad range of audio systems, catering to both fixed home and portable audio setups. With its built-in microphones and noise-cancellation technology, you will enjoy crystal-clear calls from a distance at the touch of a button. Embrace the freedom, convenience, and portability of the Earthquake BT5.3NC, your ultimate audio companion.
SKU: BT5.3NC
PRO AUDIO
-
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
XJ-300ST Stereo Amplifier
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home AudioXJ-300ST Stereo Amplifier
Features
- Class J stereo modular design provides cool running power
- Its compact and unimposing size makes it an installer’s go-to amplifier
- Numerous application possibilities with customizable channel setup
- Allows for MONO bridged, 2-channel, and 2.1-channel wiring configuration
- Versatility allows for multi-channel audio systems
- Proprietary Interlocking Design
- Used for joining two XJ-300STs for side-by-side rack mounting
- 1U rack space tall with half-rack width chassis
- Signal sensing toggle switch with +12V trigger input
- Selective variable crossover
- Bypass/lowpass toggle switch
- Turns crossover on or off
- 0–180° phase adjustment
- 110V/220V AC selector
- RCA inputs
- Volume control
- 4 detachable short rack ears included
- Used for both rack and wall mounting
- Back bracket included
- Links multiple XJ-300ST amplifiers
- Optional long ear extension brackets available – RM-300FR
- Technology Integrator’s 2016 Impact! Awards Finalist
Specifications
- Output Power:
- 2 x 110 WRMS @ 8-Ohm
- 2 x 170 WRMS @ 4-Ohm
- 170 WRMS @ 8-Ohm Mono Bridged
- 300 WRMS @ 4-Ohm Mono Bridged
- Frequency response: 20Hz–20kHz
- Input Impedance: 10 kOhm
- Impedance: 4–8 Ohm
- Crossover Frequency: 50Hz–160Hz
- SNR: > 97 dB
- Damping Factor: > 400
- THD: < 0.08%
In The Box
- (1) XJ-300ST Stereo Class J Amplifier
- (4) Short Mounting Ears
- Mounting screws included
- (1) Back Bracket
- Mounting screws included
- (4) Rubber Feet
- (1) Power Cord
Other Information
Model: XJ-300ST
EAN: 0068975901388
Priced and sold by the pieceSKU: XJ-300ST -
Accessories, Accessories, Accessories, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
Hum Kleaner
Features
- Balanced XLR and TRS inputs and outputs
- Unbalanced RCA inputs and outputs
- Adjustable stereo balanced and unbalanced output level control
- Input selector switch
- Low noise, low distortion circuitry
- External 24V AC power supply included
Applications
- Home Audio
- Professional
- Recording Studios
- Live Music
- DJ/PA
- When signals need to be pushed long distances while retaining clarity
- Mixers
- Audio Processors
- Laptop Computers
- CD/DVD Players
- Gaming Consoles
- Powered Monitors
- Digital Workstations.
Specifications
- Gain range on RCA out = 1V MAX 12dBV
- Gain range on XLR out = 0dBV MAX 18dBV
- Input Gain Limit = 5VAC with MAX out
- RCS = 9VAC
- XLR = 18VAC
- Frequency Response: 20Hz–20kHz ±2dB
- Gain Separation: 80dB @ 1000Hz
- Input Impedance: Balanced: 20 kOhms / Unbalanced: 100 kOhms
- Output Impedance: Balanced: 100 Ohms / Unbalanced: 300 Ohms
- Maximum Gain Limit: 5 VAC
- Maximum Output
- RCA:9V
- XLR:18V
- TRS:18V
- Output Gain: 18dBV
- Signal to Noise Ratio: 114 dB @ full level
- THD: < .0003% @ 1kHz
Other Information
Model: Hum Kleaner
UPC: 0689759001676
Priced and sold by the piece
SKU: Hum Kleaner -
DJ / Pro Audio, DJ Speakers
DJ-Array Gen2
Earthquake’s DJ-Quake series was known as a revolutionary portable line array system with performance that matched perfectly for bars, restaurants, DJs, houses of worship, and most other medium-sized venues. The DJ-Array Gen2 array speaker further builds off the well-known success of the DJ-Quake series now with the internal wiring built right into the mounting bracket. It features user-friendly male and female contact terminals, making setup and breakdown easy for any skill level.
The DJ-Array Gen2 packs a serious punch capable of dispersing optimized sound over long distances thanks to its advanced array design that produces a clear, punchy sound to the back of the room. Designed to be foolproof with no compromise in performance, the DJ-Array Gen2 speaker is an excellent solution for virtually any situation where high-quality sound reinforcement is needed. Whether used in a portable on-the-go system or permanent audio fixture, average enthusiasts to the everyday audio professional will love the versatility of the Earthquake DJ-Array Gen2.
SKU: DJ-Array Gen2 -
DJ / Pro Audio, Midrange Speakers
EQ650 NEO Cloth Speaker
Features
- 6.5″ (165mm) midrange/midbass driver
- Powerful multi-vented neodymium motor
- Maximum musical output and efficiency
- 2″ (50.5mm) copper voice coil construction
- Long-lasting non-pressed paper cone for reduced break-up
- Multi-roll cloth surround
- Black die-cast aluminum basket
- Spring-loaded wire terminals
- Produces natural tones at high levels with low distortion
Applications
- DJ/PA array systems
- Mobile audio systems
Specifications
- Size: 6.5″ (165mm)
- Power Handling: 200 Watts RMS / 400 Watts MAX
- 8-Ohm
- Frequency Response: 95Hz–8kHz
- Sensitivity: 95dB 2V/1M
- Resonance: 95Hz
- Overall Diameter: 6.85″ (174mm)
- Overall Depth: 3.30″ (84mm)
- Cutout Diameter: 5.82″ (148mm)
- Mounting Depth: 3.03″ (77mm)
- Magnet Diameter: 1.88″ (48mm)
- Weight: 2.84lbs (1.29kgs)
Parameters
- Fo (Hz): 95Hz±15%
- Revc (Ohm): 3.600
- Qms: 2.058
- Qes: 0.341
- Qts: 0.283
- Vas (Ltr): 6.692
- Cms (u M/N): 229.995
- Mmd (m Kg): 11.000
- Mms (g): 11.985
- BL (TM): 8.925
- No: 1.670%
- Sd (msqM): 15.314
Other Information
Model: EQ650 NEO
EAN: 0689759002239
Priced and sold by the pieceSKU: EQ650 NEO -
DJ / Pro Audio, Midrange Speakers
EQ1000 NEO Cloth Speaker
Features
- 10″ (254mm) midrange/midbass driver
- Powerful neodymium motor
- Multi-vented back plate design for increased thermal cooling
- Maximum musical output and efficiency
- 2.5″ (63mm) copper voice coil construction
- Long-lasting non-pressed paper cone for reduced break-up
- Coated multi-roll cloth surround
- Lightweight black die-cast aluminum basket
- Spring-loaded wire terminals
- Produces natural tones at high levels with low distortion
Specifications
- Size: 10″ (254mm)
- Power Handling: 350 Watts RMS / 700 Watts MAX
- Impedance: 8-Ohm
- Frequency Response: 69Hz–6kHz
- Sensitivity: 97dB 1W/1M
- Resonance: 70Hz
- Overall Diameter: 10.23″ (260mm)
- Overall Depth: 4.72″ (120mm)
- Cutout Diameter: 9.25″ (235mm)
- Mounting Depth: 4.40″ (112mm)
- Magnet Diameter: 2.28″ (58mm)
- Weight: 5.14lbs (2.33kgs)
Parameters
- Fo (Hz): 69Hz±15%
- Revc (Ohm): 5.800
- Qms: 3.738
- Qes: 0.389
- Qts: 0.352
- Vas (Ltr): 39.685
- Cms (u M/N): 208.136
- Mmd (m Kg): 21.000
- Mms (g): 25.003
- BL (TM): 12.793
- No: 3.347%
- Sd (msqM): 36.643
Other Information
Model: EQ1000 NEO
EAN: 0689759002253
Priced and sold by the pieceSKU: EQ1000 NEO -
Bluetooth Speakers, Bookshelf Speakers, DJ / Pro Audio, DJ/PA Monitors, Gaming AR/VR Audio, High Fidelity Speakers, Home Audio, Speakers, Studio Monitors, WiFi/Wireless
SM6BT (PIECE)
Bluetooth Speakers, Bookshelf Speakers, DJ / Pro Audio, DJ/PA Monitors, Gaming AR/VR Audio, High Fidelity Speakers, Home Audio, Speakers, Studio Monitors, WiFi/WirelessSM6BT (PIECE)
Experience unparalleled audio quality with the Earthquake SM6BT Professional Studio Monitor. Its bi-amplified Class AB architecture, 2-inch ribbon tweeter, and 6.5-inch carbon fiber cone woofer ensure studio-level sound. With flexible connectivity options and Bluetooth® v5.3 with True Wireless Stereo (TWS) pairing technology, the SM6BT is suitable for professional studios, home theaters, gaming systems, and more. It offers the perfect blend of professional-grade audio precision and everyday usability.
SKU: SM6BT
GAMING AUDIO
-
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
XJ-300ST Stereo Amplifier
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home AudioXJ-300ST Stereo Amplifier
Features
- Class J stereo modular design provides cool running power
- Its compact and unimposing size makes it an installer’s go-to amplifier
- Numerous application possibilities with customizable channel setup
- Allows for MONO bridged, 2-channel, and 2.1-channel wiring configuration
- Versatility allows for multi-channel audio systems
- Proprietary Interlocking Design
- Used for joining two XJ-300STs for side-by-side rack mounting
- 1U rack space tall with half-rack width chassis
- Signal sensing toggle switch with +12V trigger input
- Selective variable crossover
- Bypass/lowpass toggle switch
- Turns crossover on or off
- 0–180° phase adjustment
- 110V/220V AC selector
- RCA inputs
- Volume control
- 4 detachable short rack ears included
- Used for both rack and wall mounting
- Back bracket included
- Links multiple XJ-300ST amplifiers
- Optional long ear extension brackets available – RM-300FR
- Technology Integrator’s 2016 Impact! Awards Finalist
Specifications
- Output Power:
- 2 x 110 WRMS @ 8-Ohm
- 2 x 170 WRMS @ 4-Ohm
- 170 WRMS @ 8-Ohm Mono Bridged
- 300 WRMS @ 4-Ohm Mono Bridged
- Frequency response: 20Hz–20kHz
- Input Impedance: 10 kOhm
- Impedance: 4–8 Ohm
- Crossover Frequency: 50Hz–160Hz
- SNR: > 97 dB
- Damping Factor: > 400
- THD: < 0.08%
In The Box
- (1) XJ-300ST Stereo Class J Amplifier
- (4) Short Mounting Ears
- Mounting screws included
- (1) Back Bracket
- Mounting screws included
- (4) Rubber Feet
- (1) Power Cord
Other Information
Model: XJ-300ST
EAN: 0068975901388
Priced and sold by the pieceSKU: XJ-300ST -
Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers, Tactile Transducers
MQB-1 Tactile Transducer
Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers, Tactile TransducersMQB-1 Tactile Transducer
An Immersive Audio Experience Awaits
The MQB-1 tactile transducer or bass shaker transmits subsonic bass frequencies and vibrations into an object it’s mounted to. It can supplement or replace traditional subwoofers and is ideal for situations where headphones must be used. Like conventional subwoofers, it receives its signal from the LFE output and can be amplified by an amplifier (XJ-300ST). It is suitable for home theater, music, and gaming applications. Installing it on a gaming chair provides an immersive experience by generating massive amounts of vibration.
SKU: MQB-1 -
Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers, Tactile Transducers
Q10B Tactile Transducer
Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers, Tactile TransducersQ10B Tactile Transducer
A Unique Tactile Transducer
The Q10B tactile transducer is an awe-inspiring bass shaker designed to reproduce the effects of the lowest frequencies in music and movies. Q10B is sensitive, articulate, and renders even the most complex low frequency material in every detail. It is so powerful that it can even replace traditional hydraulic platforms in theme parks. The Q10B allows users to control the spread of LFE effects, which is especially useful if your surroundings do not permit high volume audio. When it is installed on a home theater or music chair, its outputs remain in the chair. Mounting it on a platform is also possible, providing power for multiple seats. Q10B is designed for superior music reproduction. It combines precise, quick, and articulated low frequency response with maximum tactile effect. Viewing movies with a Q10B adds a new dimension that you will not want to be without. Its patented motor system is built around ultra high-gauss neodymium magnets and a military-grade flat wire voice coil that can produce 2 inches of earthquake-inducing stroke and response as low as 5Hz.
SKU: Q10B -
Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers
Shell ShoXX Gaming Transducer
Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile TransducersShell ShoXX Gaming Transducer
Features
- Tactile performance all the way down to 15Hz
- Enhanced low frequency extension for home theater 5.1 and 2-channel systems
- Interprets low frequency by-product of in-game events and converts them to the corresponding kinetic output (vibrations)
- Patented designs exclusive to Earthquake
- Flat wire aluminum voice coil
- Thermal protection
- Rugged cast aluminum heat sink
Amplifier Specifications
- Amplification Class: Class J
- Power Output:
- 320 WRMS @ 4 Ohm
- 160 WRMS @ 8 Ohm
- Frequency Response 28Hz–175Hz
- Input Impedance: 10 kOhm
- Input Sensitivity for Full Output:
- Max: 0.2V
- Min: 1.7V
Transducer Specifications
- Frequency Response 15Hz-50Hz
- Impedance 8 Ohm
- Power Handling: 20–500W
- Pipe Size 1.1″–1.5″ (28mm–38mm)
Other Information
Model: Shell Shoxx
UPC: 0068975900305
Priced and sold by the pieceSKU: Shell Shoxx -
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile Transducers
MQB-HTK2 Bass Shaker Kit
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio, Specials, Specials, Tactile Transducers, Tactile TransducersMQB-HTK2 Bass Shaker Kit
An Immersive Audio Experience Awaits
Tactile transducers, called “bass shakers,” are designed to transmit subsonic bass frequencies that can be felt and heard. By mounting the device on a couch or chair, the vibrations produced can be transferred to the body, providing a tactile sound experience. In some cases, tactile transducers can even replace traditional subwoofers, especially when headphones may be necessary to avoid disturbing others. Tactile transducers can be connected to the LFE output, which is also used by conventional subwoofers. These devices are powered by an amplifier, such as the Class J XJ-300ST, that provides a powerful and precise low-frequency effect. The tactile transducer seamlessly integrates and enhances the audio experience when paired with an existing subwoofer.
Note: The MQB-HTK2 kit comes with one XJ-300ST amplifier and two MQB-1 Tactile Transducers.
SKU: MQB-HTK2 -
Bluetooth Speakers, Bookshelf Speakers, DJ / Pro Audio, DJ/PA Monitors, Gaming AR/VR Audio, High Fidelity Speakers, Home Audio, Speakers, Studio Monitors, WiFi/Wireless
SM6BT (PIECE)
Bluetooth Speakers, Bookshelf Speakers, DJ / Pro Audio, DJ/PA Monitors, Gaming AR/VR Audio, High Fidelity Speakers, Home Audio, Speakers, Studio Monitors, WiFi/WirelessSM6BT (PIECE)
Experience unparalleled audio quality with the Earthquake SM6BT Professional Studio Monitor. Its bi-amplified Class AB architecture, 2-inch ribbon tweeter, and 6.5-inch carbon fiber cone woofer ensure studio-level sound. With flexible connectivity options and Bluetooth® v5.3 with True Wireless Stereo (TWS) pairing technology, the SM6BT is suitable for professional studios, home theaters, gaming systems, and more. It offers the perfect blend of professional-grade audio precision and everyday usability.
SKU: SM6BT
USA EARTHQUAKE DISTRIBUTORS
