Shop
Showing 97–120 of 258 results
-
Amplifiers, Home Audio
IQ-1500 Plate Amplifier
Features
- Earthquake Class J circuitry
- XLR/RCA and high level input connections
- 20Hz, 30Hz, and 40Hz room equalization with 12dB range and boost
- Adjustable 24dB lowpass filter from 40Hz–200Hz with bypass
- 25Hz, 12dB/Oct switchable subsonic filter
- Full and advanced room correction
- IR input and remote control with volume control
- Auto signal sensing on/off switch
- Protection Circuitry:
- Short circuit
- Open circuit
- RF burnout
- Over temp
- Turn on/off transient protection
- DC protection
- Limiter circuitry
- Phase shift
- Phase Delay
- Custom flush mount design
- Dual gains internally mixed
- Channel and power status LEDs
- DC turn ON/OFF
- 110V/220V AC selector
Specifications
- Power Output:
- 3000 watts dynamic effect pinknoise
- 1 x 1500 watts RMS @ 2 Ohms Mono (1% distortion)
- 1 x 1100 watts RMS @ 4 Ohms Mono (1% distortion)
- 1 x 700 watts RMS @ 8 Ohms Mono ( 1% distortion)
- Frequency Response: 10–2kHz
- Load Impedance: 2 Ohm or greater
- Total Harmonic Distortion: <0.08% (1W/4)
- Slew Rate: 55V/microsecond
- Signal to Noise Ratio: > 106dB (balanced) 105dB (unbalanced) @ rated power
Dimensions
- Overall Dimensions: 11.65″ (296mm) x 8.5″ (216mm) x 3.84″ (mm)
- Plate thickness : 0.19″ (5mm)
- Cut Out Hole: 10.62″ (270mm) x 7.28″ (185mm)
- Transformer: 3.74″ (95mm) x 4.72″ (120mm) x 4.72″ (120mm)
- Weight: 26.04 lbs (12.2 kgs)
Other Information
Model: IQ-1500
UPC: 0068975900152
Priced and sold by the pieceSKU: IQ-1500 -
Home Audio, In-Wall & In-Ceiling Speakers
IQ6D
Features
- Edgeless design for seamless blend
- 6″ (154mm) low mass woven glass fiber cone woofer, dual voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C6
Specifications
- Power Handling: 25–300 Watts
- Frequency Response: 40Hz–21kHz
- Sensitivity: 93dB @ 1W/1M
- Impedance: Dual 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall Diameter with Grille: 9″ (228mm)
- Cut Out Diameter: 7.87″ (200mm)
- Mounting Depth: 3.75″ (94mm)
Other Information
Model: IQ6D
UPC: 0068975901302
Priced and sold by the pieceSKU: IQ6D -
Home Audio, In-Wall & In-Ceiling Speakers
IQ6S (Pair)
Features
- Edgeless design for seamless blend
- 6″ (154mm) low mass woven glass fiber cone woofer, single voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C6
Specifications
- Power Handling: 25–300 Watts
- Frequency Response: 40Hz–21kHz
- Sensitivity: 93dB @ 1W/1M
- Impedance: 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall Diameter with Grille: 9″ (228mm)
- Cut Out Diameter: 7.87″ (200mm)
- Mounting Depth: 3.75″ (94mm)
Other Information
Model: IQ6S
UPC: 0068975901296
Priced and sold by the pairSKU: IQ6S -
Home Audio, In-Wall & In-Ceiling Speakers
IQ8D
Features
- Edgeless design for a seamless blend
- 8″ (203mm) low mass woven glass fiber cone woofer, single voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C8
Specifications
- Power Handling: 35–400 Watts
- Frequency Response: 30Hz–21kHz
- Sensitivity: 91dB @ 1W/1M
- Impedance: 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall diameter: 10.59″ (269mm)
- Cut out diameter: 9.5″ (240mm)
- Mounting depth: 4.76″ (121mm)
Other Information
Model: IQ8D
UPC: 0068975901326
Priced and sold by the pieceSKU: IQ8D -
Home Audio, Open Box
IQ8S (Open-Box)
Features
- Edgeless design for seamless blend
- 8″ (133mm) low mass woven glass fiber cone woofer, single voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C8
Specifications
- Power Handling: 35–400 Watts
- Frequency Response: 30Hz–21kHz
- Sensitivity: 91dB @ 1W/1M
- Impedance: 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall diameter: 10.59″ (269mm)
- Cut out diameter: 9.5″ (240mm)
- Mounting depth: 4.76″ (121mm)
Other Information
Model: IQ8S
EAN: 0068975901319
Priced and sold by the pairPLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: IQ8S (OB) -
Home Audio, In-Wall & In-Ceiling Speakers
IQ8S (Pair)
Features
- Edgeless design for seamless blend
- 8″ (203mm) low mass woven glass fiber cone woofer, single voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C8
Specifications
- Power Handling: 35–400 Watts
- Frequency Response: 30Hz–21kHz
- Sensitivity: 91dB @ 1W/1M
- Impedance: 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall diameter: 10.59″ (269mm)
- Cut out diameter: 9.5″ (240mm)
- Mounting depth: 4.76″ (121mm)
Other Information
Model: IQ8S
UPC: 0068975901319
Priced and sold by the pairSKU: IQ8S -
Accessories, Accessories, Car Audio, Home Audio
ISO-200
Specifications
- Eliminates Hum or Ground Loop Noise
- Unbalanced RCA to Balanced XLR Conversion
- XLR for balanced inputs and outputs
- RCA for unbalanced inputs and outputs
- 600Ω impedance industry standard
- Compact rugged construction
Dimensions
- Height: 3.32″ (84.33mm)
- Width: 2.91″ (74.00mm)
- Depth: 1.35″ (34.26mm)
Other Information
Model: ISO-200
UPS: 0689759001928
Priced and sold by the pieceSKU: ISO-200 -
Accessories, Amplifiers, Home Audio, WiFi/Wireless
IWS Stereo Balanced Preamp
Features
- 2-channel balanced output preamplifier
- Transport power and signal over Ethernet (PoE)
- Cat 5/6 support
- High Voltage Balanced Transport™
- Easy installation
- Multi-room solution
- Up to 200 feet noise-free audio
- Designed to work with Earthquake BTA-250 In-Wall Amplifier
Specifications
- Input: 3.5 mm stereo line in
- 12–24VDC power input
- Output: 4 volts balanced
- Power Range: 12–24VDC
- S/N: 105dBA
- Easy Installation
Other Information
Model: IWS
EAN: 0689759001843
Priced and sold by the pieceSKU: IWS -
Car Audio, Subwoofers
K-10 Kompressor Tube
Features
- Compact and durable 10″ cylinder-style subwoofer with patented 10″ SLAPS passive radiator
- Wide Santoprene edge surround for superior long stroke and durability
- Easiest and most economical way to add deep, clean, all-around bass to an audio system
- SLAPS passive-tuned enclosure design for optimum bass response
- Allows the active driver compression-free excursion resulting in deep, dynamic, and hard-hitting bass response
- Adds up to +6dB of bass compared to sealed and ported enclosures
- Significantly increases subwoofer efficiency and ability for ultra-low frequency reproduction
- It helps decrease enclosure volume
- High-density molded tube enclosure material
- 2″ 4-wound flat wire voice coil
- Spring-loaded terminals
- Removable grilles
- Mounting feet and hardware included
- It easily fits into any vehicle
Specifications
- Drivers:
- 10″ Active
- 10″ SLAPS Passive Radiator
- Power Handling: 800 Watts Max
- Frequency Response: 20Hz–1.5kHz
- Impedance: 4-Ohm
Dimensions
- HxWxD: 9.76″ (248mm) x 18″ (457mm) x 10.95″ (278mm)
- Weight: 23.42 lbs (10.62 kgs)
Other Information
Model: K-10
EAN: 0689759101352
Priced and sold by the pieceSKU: K-10 -
Home Audio, Open Box
Limestone-10D (Open-Box)
Features
- UV treated and weather-resistant enclosure materials.
- Durable 15mm epoxy resin construction.
- Completely sealed speaker with butyl rubber surround, polypropylene cone, and polypropylene dust cap.
- Rock-like appearance and finish to easily blend in with any outdoor environment.
- “S” shaped port prevents water/moisture from entering and adds 3dB.
- Soft injection molded rubber spider for waterproofing and durability.
- Paintable enclosure to match any environment.
Specifications
- Woofer size: 10″
- Frequency Response: 30Hz–100Hz
- Power Handling: 250 WRMS / 400 Watts MAX
- Sensitivity: 92dB
- Impedance: 2 x 4-Ohm (Both coils are wired in series for a total impedance of 8-Ohms)
- Voice Coil Diameter: 2.5″ (63.5 mm)
- Surround Material: Butyl Rubber
- Cone material: Polypropylene
- Dust cap material: Polypropylene
- Enclosure Material: Epoxy Resin
Dimensions
- Height: 14″ (356 mm)
- Width: 18.5″ (570 mm)
- Depth: 21″ (534 mm)
Other Information
Model: Limestone-10D
EAN: 0068975900831
Priced and sold by the pieceSKU: LIMESTONE-10D (OB) -
Home Audio, Outdoor/Indoor Speakers
Limestone-10D Outdoor Subwoofer
Features
- UV treated and weather-resistant enclosure materials.
- Durable 15mm epoxy resin construction.
- Completely sealed speaker with butyl rubber surround, polypropylene cone, and polypropylene dust cap.
- Rock-like appearance and finish to easily blend in with any outdoor environment.
- “S” shaped port prevents water/moisture from entering and adds 3dB.
- Soft injection molded rubber spider for waterproofing and durability.
- Paintable enclosure to match any environment.
Specifications
- Woofer size: 10″
- Frequency Response: 30Hz–100Hz
- Power Handling: 250 WRMS / 400 Watts MAX
- Sensitivity: 92dB
- Impedance: 2 x 4-Ohm (Both coils are wired in series for a total impedance of 8-Ohms)
- Voice Coil Diameter: 2.5″ (63.5 mm)
- Surround Material: Butyl Rubber
- Cone material: Polypropylene
- Dust cap material: Polypropylene
- Enclosure Material: Epoxy Resin
Dimensions
- Height: 14″ (356 mm)
- Width: 18.5″ (570 mm)
- Depth: 21″ (534 mm)
Other Information
Model: Limestone-10D
UPS: 0068975900831
Priced and sold by the pieceSKU: LIMESTONE-10D -
Home Audio, Outdoor/Indoor Speakers
Limestone-82 Outdoor Speaker
Features
- Completely sealed speaker with Santoprene surrounds, poly cones, and poly dust caps
- Woofer: 8″ (203mm)
- Tweeter: 1″ (25mm) mylar
- UV treated and weather-resistant enclosure materials
- Durable epoxy resin construction
- Rock-like appearance and finish to easily blend in with any outdoor environment
Specifications
- RMS Power Rating: 20–250 Watts
- Frequency Response: 50Hz–21kHz
- Sensitivity: 93dB
- Impedance: 4-Ohm
- Enclosure: 15mm epoxy resin
- Finish: Limestone rock finish
Dimensions
- Height: 11.5″ (293mm)
- Width: 15″ (381mm)
- Depth: 11.75″ (299mm)
Other Information
Model: Limestone-82
UPS: 0068975900848
Priced and sold by the pieceSKU: LIMESTONE-82 -
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
LOC300R Line Out Converter
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home AudioLOC300R Line Out Converter
Features
- Hi/Low Level Converter
- Signal Noise Eliminator
- 2-Channel Signal Outputs
- Adjustable Output Level
- Auto Remote Amplifier Turn-on
- Input Audio Optimizing Circuitry
- Output Audio Optimizing Circuitry
- Independent Level Controls
- Integrated Wire Strain Relief
Dimensions
- H x W x D: 3.93ʺ (100mm) x 2.20ʺ (56mm) x 1.18ʺ (30mm) x
Other Information
Model: LOC300R
UPC: 0168975911001
Priced and sold by the pieceSKU: LOC300R -
Home Audio, Open Box
LSA6.5 (Open-Box)
Features
- Designed for use with the PCS6.5 Pendant Ceiling Speaker
- Converts the PCS6.5 into a standing landscape speaker
- Weather resistant rubber seal
- Fully enclosed UV resistant cap
- All rust proof screws
- Corrosion resistant coated base plate
- Structurally reinforced plastic stake
PLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: LSA6.5 (OB) -
Accessories, Home Audio, Outdoor/Indoor Speakers
LSA6.5 Landscape Speaker Accessory
Features
- Designed for use with the PCS6.5 Pendant Ceiling Speaker
- PCS6.5 is sold separately
- Converts the PCS6.5 into a standing landscape speaker
- Weather resistant rubber seal
- Fully enclosed UV resistant cap
- All rust-proof screws
- Corrosion resistant coated base plate
- Structurally reinforced plastic stake
Other Information
Model: LSA6.5
UPC: 0689759001577
Priced and sold by the pieceSKU: LSA6.5 - Designed for use with the PCS6.5 Pendant Ceiling Speaker
-
Car Audio, DJ / Pro Audio, Subwoofers, Subwoofers
MAGMA-12X
Upon its release, Earthquake’s MAGMA-X drivers toppled DB drag records one by one like a bowling ball rolling through the lane. The MAGMA-12X effectively converts electrical energy into physical movement with a mechanical construction of superior quality, evident in the almost absurd over-building of all components.
This is further enhanced by adding TCT (Turbine Cooled Transducer) technology. TCT is a patented earthquake-exclusive technology that implements a fixed turbine vane impeller in the magnet gap. It forces the drawn-in air to rotate in a vortex pattern against the aluminum voice coil, exponentially increasing the surface contact of the cooling air. The result is a 3db increase in sound output at rated power compared to the same transducer without TCT.
The intelligent MAGMA-X design with an overbuilt motor system results in a device that is always electrically controlled by the amplifier. The strong reactive electromagnetic coupling ensures the woofer remains compression-free and will not dampen itself mechanically. The high edge surround combined with the super spider allows for huge excursion. The driver’s electrically controlled and mechanically unhampered movement results in a transient response with previously unheard-of dynamic capability.
SKU: MAGMA-12X -
Car Audio, Open Box
Magma-12X (Open-Box)
Upon its release, Earthquake’s MAGMA-X drivers toppled DB drag records one by one like a bowling ball rolling through the lane. The MAGMA-12X effectively converts electrical energy into physical movement with a mechanical construction of superior quality, evident in the almost absurd overbuilding of all components.
This is further enhanced by adding TCT (Turbine Cooled Transducer) technology. TCT is a patented earthquake-exclusive technology that implements a fixed turbine vane impeller in the magnet gap. It forces the drawn-in air to rotate in a vortex pattern against the aluminum voice coil, exponentially increasing the surface contact of the cooling air. The result is a 3db increase in sound output at rated power compared to the same transducer without TCT.
The intelligent MAGMA-X design with an overbuilt motor system results in a device that is always electrically controlled by the amplifier. The strong reactive electromagnetic coupling ensures the woofer remains compression-free and will not dampen itself mechanically. The high edge surround combined with the super spider allows for huge excursion. The driver’s electrically controlled and mechanically unhampered movement results in a transient response with previously unheard-of dynamic capability.
Note: An open-box product refers to an item that is refurbished or new but has had its packaging opened or is a display item. A full warranty applies.
SKU: Magma-12X (OB) -
Car Audio, Subwoofers
MAGMA-15X
Features
- Super wide edge surround for long excursion
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor
- High gauss 2″ thick motor system of strontium cobalt to assist long excursion
- Bump back plate for higher excursion
- PBP (Perforated Back Plate) that circulates cold air into the gap
- Back plate holes to create massive cooling in the gap
- Voice coil of heavy gauge oxygen-free copper (OFC) wire
- Aluminum voice coil former
- Mil-spec coil coating
- Spring loaded push on terminals
Specifications
- Driver Size 15″
- Power Handling:
- 700 WRMS
- 2000 Watts MAX
- Impedance: Dual 4-Ohm
- Voice Coil Diameter: 3″ (76.2mm)
- Sensitivity: 89dB
Dimensions
- Cutout Diameter: 14″ (357mm)
- Mounting Depth: 8″ (203mm)
- Motor Diameter: 8.93″ (227mm)
Parameters
- Fs: 20.2Hz
- Sd: 137.95 in² / 0.089 m²
- Qes: 0.3219
- Qms: 4.7850
- Qts: 0.3017
- Revc: 8 Ohm
- Vas: 210.14 L / 7.4210 ft3
Other Information
Model: MAGMA-15X
EAN: 0168975910332
Priced and sold by the pieceSKU: MAGMA-15X -
Car Audio, Open Box
Magma-15X (Open-Box)
Specifications
- SWE 15″ Subwoofer
- 1500 Watt Max
- 700 Watt RMS
- 4 Ohm
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor in with the cold air and out with the hot air
- Super thick motor to assist long excursion – 2” thick
- PBP (Perforated Back Plate) that circulate cold air into the gap
SKU: Magma-15X (OB) -
Car Audio, Open Box
MiNi D1000 1st Gen (Open-Box)
Features
- Clip Suppression technology
- Bridge-Link feature with two Mini D amplifiers (of same model)
- Fan free operation
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1000 Watts
- RMS Power
- RMS Power 1-Ohm: 600 Watts
- RMS Power 2-Ohm: 360 Watts
- RMS Power 4-Ohm: 180 Watts
- 0 – 12dB (30-80Hz) Bass Boost – available on the D2000 and D2500 models
- Variable Subsonic Filter
- 40-180Hz LPF (Low Pass Filter)
- Gain Control
- Remote Gain Level Control
- Fuse Rating: 40A (included)
Dimensions
- Dimensions (H x W x D): 1-7/8″ (48mm) x 7″ (177mm) x 6-5/16″ (160mm)
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000 1st Gen (OB) -
Amplifiers, Car Audio
MiNi D1000 2nd Gen
Features
- Clip suppression technology to avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Bridge In/Out feature allows two MiNi D amplifiers (of same model) to be linked together for triple the output of a single unit.
- Fan free operation with stellar efficiency negates the need for noisy fans even when driven continuously 2db into clip.
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Power and Protection LED
- Variable Subsonic Filter
- Gain Level Control
- Remote Gain Level Control
- Remote base knob and cable (over 20ft) included.
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1200 Watts
- RMS Power:
- 600 Watts @ 1-Ohm
- 360 Watts @ 2-Ohm
- 180 Watts @ 4-Ohm
- Gain Level Control: 0.2V–5V RMS
- Low Pass Filter: 40Hz–180Hz
- Subsonic Filter: OFF–50Hz
- Frequency Adjustment: 30Hz–80Hz
- Bass Boost: 0–12dB
Dimensions
- HxWxD: 1.92″ (49mm) x 6.29″ (160mm) x 9.84″ (250mm)
Other Information
Model: MiNi D1000 2nd Gen
UPC: 0689759100683
Priced and sold by the pieceSKU: MiNi D1000 2nd Gen -
Car Audio, Open Box
MiNi D1000 2nd Gen (Open-Box)
Features
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Comes complete with remote base knob and cable (over 20ft)
- Power and Protection LED
- Variable Subsonic Filter
- Gain Control
- Remote Gain Level Control
- Clip Suppression Technology
- Bridge-Link
- Fan Free Operation
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1000 Watts
- RMS Power
- RMS Power 1-Ohm: 600 Watts
- RMS Power 2-Ohm: 360 Watts
- RMS Power 4-Ohm: 180 Watts
- 0–12dB (30–80Hz) Bass Boost
- 40–180Hz LPF (Low Pass Filter)
Dimensions
- (H x W x D): 1-15/16″ (49mm) x 6-5/16″ (160mm) x 9-7/8″ (250mm)
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000 2nd Gen (OB) -
Amplifiers, Car Audio
MiNi D1000.4 2nd Gen
Introducing the MiNi D1000.4 2nd Gen, the ultimate 4-channel full-range amplifier of the MiNi D series. This compact powerhouse redefines car amplifier technology with its micro-sized chassis, equipped with Earthquake’s innovative Power Chip technology. Delivering robust and cool running power, the MiNi D1000.4 sets a new standard for efficiency and performance in the industry.
Engineered by Earthquake’s chief engineer, Joseph Sahyoun, this class D amplifier represents a leap into the future of car audio technology. Designed to be smaller, stronger, and smarter, the MiNi D1000.4 is a true next-gen amplifier that outshines the competition with its sophistication and cutting-edge features. With a focus on decreasing size without compromising power, Earthquake has achieved an unprecedented power density level, setting a new benchmark for amplifiers of its kind.
SKU: MiNi D1000.4 2nd Gen -
Car Audio, Open Box
MiNi D1000.4 2nd Gen (Open-Box)
Features
- Clip Suppression technology to avoid hard clipping
- Fan free operation with stellar efficiency negates the need for noisy fans
- User selectable high and low pass crossovers with variable crossover frequency
- Boost function, enables up to 15dB boost of the chosen crossover frequency
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 1000 Watts
- RMS Power:
4 x 85W @ 4-Ohm
4 x 120W @ 2-Ohm
2 x 200W @ 4-Ohm Bridged - Frequency Response: 20–20kHz
- Signal-to-Noise Ratio: >100dB
- Bass Boost: 0–15dB
- THD+N: < 1%
- Fuse Rating: 1 x 60A (included)
Dimensions
- (H x W x D): 1-15/16″ (48.5mm) x 7-15/16″ (202mm) x 6-15/16″ (160mm)
SKU: MiNi D1000.4 2nd Gen (OB)
