SWAT-RECX
In stock
Features
- Channels: 20
- Two types of inputs supporting microphones and stereo
- Additional High level input 0.5V to 17V RMS for direct connection to amplifier (hooks up just like a regular speaker)
- USB connection supports power and audio source (source device must support analog 2 pin USB audio output)
- Digital transmission
- Highest sampling ratios: 64k @ 16 bit x 2, frequency response 5 to 20.000Hz;
- Frequency: 2400-2528MHz
- HDCD transmission grade
- Lowest latency (<0.5ms)
- Low power consumption
- Audio muting function when receiving weak signal or no signal
- Auto channel scanning function
Specifications
- 2.4Ghz
- Channel Selections: 30 Channels
- Work Voltage: 3.6–6VDC
- Receiver Work Current: Max 35 mA
- Operation Temperature: 5–149 °F (-5–65 °C)
- Practical Mode Freq. Range: 2400–2528 MHz
- Band Rate: 2 Mbps
- Frequency Stability: ±156kHz
- Practical Working Frequency: 2400–2428 MHz
- Channel Space: 4 MHz
- RF Range: Up to 150 feet (45 meters) of open field
- Receiver RX Sensitivity: 90 dBm
- Receiver Stereo Output Level 1: 30mW RL = 32 Ohms
- Receiver Stereo Output Level 2: 50mW RL = 16 Ohms
- Receiver Output Impedance: 1 kOhm
- In/Out Gain Ratio: 1:1
- Frequency Response: 20Hz–20kHz (±1dB)
- Latency: <0.5ms
- Sampling Ratio: 64k @ 16 bit x 2
- S/N Ratio: 95dB
- THD: 0.3% @ 1kHz
- Dynamic Range: 90dB
- Channel Separation: 70dB
Applications
- Audio transmission in a large room (DJ)
- Outdoor speakers (BBQ, Patio, Pool)
- Wireless audio transmission for surveillance
- Paging System
- Wireless microphones or loudspeakers
- iPod, sound card, CD, DVD, MP3, smart phones players or other music players
- Wireless headphones
- Ambient music (in offices, hospitals, waiting rooms)
In The Box
- One (1) receiver
- One (1) 3.5mm to 3.5mm cable
- One (1) 3.5mm to RCA cables
- One (1) 100–240V power supplies
Other Information
Model: SWAT-RECX
EAN: 0689759000662
Priced and sold by the set
$67.99 $79.99
In stock
CompareSWAT-RECX WIRELESS AUDIO RECEIVER
The Earthquake SWAT-RECX wireless audio receiver allows you to play audio material from your audio source player to any speaker wirelessly. Hard wiring your speakers to your sound source is costly and time consuming. SWAT-RECX makes install a snap and does not compromise sound quality for convenience. It is extremely versatile and perfect for apartments or outdoor settings. It even has microphone capability so you can transmit voice as well.
The SWAT-2.4X consists of a Transmitter (a unit that connects to the source) and a Receiver (a unit that connects to the amplifier or powered speaker). The SWAT 2.4X Transmitter connects to a stereo, MP3 player, computer, or any other device that can play audio through a 3.5mm stereo jack or RCA output. Alternately it can also be connected directly to the speaker outputs via its High level input supporting 0.5V to 17V RMS. The Receiver is then connected to an amplifier or a powered speaker through an RCA input. Multiple Receivers can connect wirelessly to one Transmitter if you want the music to play in different areas or on multiple systems. Extra Receivers can be purchased separately.
Once the Transmitter and Receiver are paired, the Receiver will receive signals from the Transmitter automatically. If there is any interference on the current channel, all you have to do is change to the channel of the Transmitter; the Receiver can sense the frequency change and will adjust automatically. It has 20 available channels, more channels than any other wireless transceiver has to date. There is also a one in 20 million chance that the pairing channel will interfere with a different signal.
Both the Transmitter and the Receiver must be connected to a power source of which there are two options. One is the DC power supply which connects to any wall outlet, and the other is USB.
Based on 0 reviews
Be the first to review “SWAT-RECX”
You must be logged in to post a review.
There are no reviews yet.