-25%
, , ,

MAGMA-12X

Availability:

In stock


Upon its release, Earthquake’s MAGMA-X drivers toppled DB drag records one by one like a bowling ball rolling through the lane. The MAGMA-12X effectively converts electrical energy into physical movement with a mechanical construction of superior quality, evident in the almost absurd over-building of all components.

This is further enhanced by adding TCT (Turbine Cooled Transducer) technology. TCT is a patented earthquake-exclusive technology that implements a fixed turbine vane impeller in the magnet gap. It forces the drawn-in air to rotate in a vortex pattern against the aluminum voice coil, exponentially increasing the surface contact of the cooling air. The result is a 3db increase in sound output at rated power compared to the same transducer without TCT.

The intelligent MAGMA-X design with an overbuilt motor system results in a device that is always electrically controlled by the amplifier. The strong reactive electromagnetic coupling ensures the woofer remains compression-free and will not dampen itself mechanically. The high edge surround combined with the super spider allows for huge excursion. The driver’s electrically controlled and mechanically unhampered movement results in a transient response with previously unheard-of dynamic capability.

$299.99 $400.00

In stock

Compare

Features

  • Super wide edge surround for long excursion
  • Poly-ether draw surround with thick single layer for longer life and max excursion
  • Edge reinforced inverted dust cap for lower cone distortion
  • 3mm stiff, non-pressed fiber cone for faster response and lighter mass
  • MAX OD spider for more spider area and more linear spring constant
  • Patented TCT (Turbo Cooled Technology) forced-cooled motor
  • High gauss 2″ thick motor system of strontium cobalt to assist long excursion
  • Bump back plate for higher excursion
  • PBP (Perforated Back Plate) that circulates cold air into the gap
  • Back plate holes to create massive cooling in the gap
  • Voice coil of heavy gauge oxygen-free copper (OFC) wire
  • Aluminum voice coil former
  • Mil-spec coil coating
  • Spring-loaded push terminals

Specifications

  • Driver Size 12″
  • Power Handling: 500W RMS / 1500W MAX
  • Impedance: Dual 4-Ohm
  • Voice Coil Diameter: 3″ (76.2mm)
  • Sensitivity: 85.5dB

Dimensions

  • Cutout Diameter: 11.14″ (283mm)
  • Mounting Depth: 6.69″ (170mm)
  • Motor Diameter: 7.08″ (180mm)

Parameters

  • Fs: 23Hz
  • Sd: 81 in² / 0.0053 m²
  • Qes: 0.642
  • Qms: 1.641
  • Qts: 0.2379
  • Revc: 5.8 Ohm
  • Vas: 73.27 L / 2.58 ft3

Other Information

Model: MAGMA-12X
EAN: 0168975910301
Priced and sold by the piece

MANUAL

CUT SHEET

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MAGMA-12X”

There are no reviews yet.