home audio amplifier
Showing all 4 results
-
Amplifiers, Amplifiers, Gaming AR/VR Audio, Home Audio
Cinénova 12
The Earthquake Cinénova 12 is a highly versatile 12-channel amplifier that provides exceptional sound quality and performance. Offering flexibility with 12 channels across six stereo zones, this amplifier showcases a sleek design, user-friendly interface, and advanced protection features. Noteworthy for its exceptional flexibility and customization, it caters to the diverse needs of audio enthusiasts and integrators, making it ideal for home theater and distributed audio systems. With a focus on value, performance, and adaptability, the Cinénova 12 is positioned as a premier option in the multi-room audio market.
SKU: Cinenova 12 -
Amplifiers, Home Audio
Cinénova 7300
Features
- Ultimate Sound Quality
- Low Distortion
- Monaural Design: Completely separate output blocks.
- RCA Input: Accepts low-level signal from any source, such as a processor or receiver (0.4 VAC – 6 VAC)
- Input Selector: To maintain signal integrity, Cinénova 7300 provides an “Input Selector Switch,” which allows you (the installer) to select between RCA or XLR inputs.
- Fully Balanced XLR Inputs: We recommend the use of fully balanced XLR inputs in cases when the distance between the Cinénova and the audio source is excessive and susceptible to noise interference.
- Input Sensitivity: Input selector gain set is based on your processor output voltage.
- Gold Plated Speaker Binding Posts: We recommend that you use a high-quality wire constructed of fine, multi-strand copper, 10 or 12 gauge.
- 12VDC Trigger: Detects an incoming 12VDC signal and will automatically power on the amplifier.
- Ground Wire Binding Post: Grounds the amplifier to your AV receiver/processor.
Specifications
- Number of Channels: 7 channels
- Power Rating per Channel (All Channels Driven):
- 180W RMS at 8 ohms
- 300W RMS at 4 ohms
- 550W RMS at 8 ohms
- Input Impedance:
- RCA: 28 kΩ
- XLR: 48 kΩ
- Input Sensitivity: 30 kΩ
- Frequency Response: Up to 30kHz ±0.1dB
- Total Harmonic Distortion + Noise: 0.003% at 1 watt
- Signal to Noise Ratio (A-Weighted): Greater than -111dB
- Cross Talk / Channel Separation: Greater than -110dB from 17Hz to 40kHz
- Slew Rate: 60V/microsecond
- Damping Factor: 1600 at 8 ohms
- DC Output Offset: 0.004
- Power Requirement: 120 VAC/240 VAC Factory Preset
Dimensions
- Front Panel (H x W): 7″ x 19″ (178 mm x 483 mm)
- Mounting (H x W): 4″ x 18.37″ (102 mm x 467 mm)
- Chassis (H x W x D): 7″ x 17″ x 17.12″ (178 mm x 432 mm x 435 mm)
- Net Weight: 80 lb (36.3 kg)
- Shipping Weight: 93 lb (42 kg)
Other Information
Model: Cinenova 7300
EAN: 0689759002222
Priced and sold by the pieceSKU: Cinénova 7300 -
Amplifiers, Home Audio
IQ-1500 Plate Amplifier
Features
- Earthquake Class J circuitry
- XLR/RCA and high level input connections
- 20Hz, 30Hz, and 40Hz room equalization with 12dB range and boost
- Adjustable 24dB lowpass filter from 40Hz–200Hz with bypass
- 25Hz, 12dB/Oct switchable subsonic filter
- Full and advanced room correction
- IR input and remote control with volume control
- Auto signal sensing on/off switch
- Protection Circuitry:
- Short circuit
- Open circuit
- RF burnout
- Over temp
- Turn on/off transient protection
- DC protection
- Limiter circuitry
- Phase shift
- Phase Delay
- Custom flush mount design
- Dual gains internally mixed
- Channel and power status LEDs
- DC turn ON/OFF
- 110V/220V AC selector
Specifications
- Power Output:
- 3000 watts dynamic effect pinknoise
- 1 x 1500 watts RMS @ 2 Ohms Mono (1% distortion)
- 1 x 1100 watts RMS @ 4 Ohms Mono (1% distortion)
- 1 x 700 watts RMS @ 8 Ohms Mono ( 1% distortion)
- Frequency Response: 10–2kHz
- Load Impedance: 2 Ohm or greater
- Total Harmonic Distortion: <0.08% (1W/4)
- Slew Rate: 55V/microsecond
- Signal to Noise Ratio: > 106dB (balanced) 105dB (unbalanced) @ rated power
Dimensions
- Overall Dimensions: 11.65″ (296mm) x 8.5″ (216mm) x 3.84″ (mm)
- Plate thickness : 0.19″ (5mm)
- Cut Out Hole: 10.62″ (270mm) x 7.28″ (185mm)
- Transformer: 3.74″ (95mm) x 4.72″ (120mm) x 4.72″ (120mm)
- Weight: 26.04 lbs (12.2 kgs)
Other Information
Model: IQ-1500
UPC: 0068975900152
Priced and sold by the pieceSKU: IQ-1500 -
Amplifiers, Home Audio
Supernova MKVI DSP Amplifier
Features
- 1500W dynamic and over 1000W RMS at 2Ω
- Advanced class D circuitry
- Fully balanced XLR input and output
- Low level RCA input and output
- Frequency Response: 18Hz–115Hz
- Crossover Frequency:40Hz–160Hz
- Continuously variable crossover with up to 48db/Oct slope
- Room correction with full DSP control
- Mono DSP output for sending processed signal to an additional subwoofer
- 3-way Auto/On/Off signal mode selector
- XLR/RCA input mode selector
- DSP On/Off selector
- Auto room tuning adjustments
- 0–180° phase adjustment selector
- IR remote and remote eye
- iWoofer™ Pro compatible
- DSP pairing via Bluetooth™
- 110V/220V AC selector
iWoofer Features
- XOver Control (6, 12, 18, 24, 30, 36, 42, and 48dB/Octave)
- Gain Control
- SHS Control
- Delay Control
- Phase Control (Variable phase with 1 degree increment from 0–180°)
- Limiter-Compressor Base Control
- Limiter-Compressor Detailed Control*
- Dynamic Bass Base Control
- Dynamic Bass Detailed Control*
- Remote Hardware Control
- Preset Manager
- Preset Import/Export Features
- Automated Room Correction*
- SPLMeter*
* iWoofer Pro Features Only
Dimensions
- H x W x D: 8.50″ (216mm) x 11.65″ (296mm) x 4.5″ (114mm)
- Depth includes knob protrusions and PCB boards
- Weight: 11.20 lbs (5.08 kgs)
- Weight includes the amplifier and transformer
Other Information
Model: MKVI DSP AMP
EAN: 0689759002345
Priced and sold by the pieceSKU: MKVI DSP AMP