dsp amplifier
Showing all 3 results
-
Amplifiers, Home Audio
Supernova MKVI DSP Amplifier
Features
- 1500W dynamic and over 1000W RMS at 2Ω
- Advanced class D circuitry
- Fully balanced XLR input and output
- Low level RCA input and output
- Frequency Response: 18Hz–115Hz
- Crossover Frequency:40Hz–160Hz
- Continuously variable crossover with up to 48db/Oct slope
- Room correction with full DSP control
- Mono DSP output for sending processed signal to an additional subwoofer
- 3-way Auto/On/Off signal mode selector
- XLR/RCA input mode selector
- DSP On/Off selector
- Auto room tuning adjustments
- 0–180° phase adjustment selector
- IR remote and remote eye
- iWoofer™ Pro compatible
- DSP pairing via Bluetooth™
- 110V/220V AC selector
iWoofer Features
- XOver Control (6, 12, 18, 24, 30, 36, 42, and 48dB/Octave)
- Gain Control
- SHS Control
- Delay Control
- Phase Control (Variable phase with 1 degree increment from 0–180°)
- Limiter-Compressor Base Control
- Limiter-Compressor Detailed Control*
- Dynamic Bass Base Control
- Dynamic Bass Detailed Control*
- Remote Hardware Control
- Preset Manager
- Preset Import/Export Features
- Automated Room Correction*
- SPLMeter*
* iWoofer Pro Features Only
Dimensions
- H x W x D: 8.50″ (216mm) x 11.65″ (296mm) x 4.5″ (114mm)
- Depth includes knob protrusions and PCB boards
- Weight: 11.20 lbs (5.08 kgs)
- Weight includes the amplifier and transformer
Other Information
Model: MKVI DSP AMP
EAN: 0689759002345
Priced and sold by the pieceSKU: MKVI DSP AMP -
Amplifiers, Amplifiers, Amplifiers, DJ / Pro Audio, Home Audio
XJ-1000FR Full-Range Stereo Amplifier
Features
- Digital Signal Processing
- DRCDC (Dynamic Rail Control Drive Circuitry)
- Left / Right RCA Inputs
- Left / Right XLR Balanced Inputs
- Stereo / Bridged Switch
- External Trigger Input
- USB Port
- MAC & PC compatible
- Detachable Rack Ears
- Not suitable for powering tactile transducers
Specifications
- Output Power:
- 1 x 1400 Watt IHF (4-Ohms Mono)
- 1 x 1000 Watt IHF (8-Ohms Mono)
- 2 x 700 Watt IHF (2-Ohms stereo)
- 2 x 500 Watt IHF (4-Ohms stereo)
- 2 x 300 Watt IHF (8-ohms stereo)
- 1 x 1000 WRMS (4-Ohms Mono)
- 1 x 600 WRMS (8-Ohms Mono)
- 2 x 500 WRMS (2-Ohms stereo)
- 2 x 300 WRMS (4-Ohms stereo)
- 2 x 150 WRMS (8-ohms stereo)
- Load Impedance: 2 Ohms or greater
- Frequency Response 10Hz-24kHz
- Total Harmonic Distortion <0.02%
- Signal to Noise Ratio: 112dB (balanced) 108dB (unbalanced)@ rated power
- Damping factor above 1500 @ 200Hz 4-Ohm
SKU: XJ-1000FR -
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
XJ-700DSP LFE Mono Amplifier
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home AudioXJ-700DSP LFE Mono Amplifier
Features
- High Power LFE Mono Block Subwoofer Amplifier
- App Controlled DSP (iWoofer™ Pro recommended)
- Amplifier Class: Class J
- Channels/Zones: 1
- Transformer Type: Toroidal Transformer
- Built-In Boundary Equalizer
- 0–180° Phase Adjustment
- DSP ON/OFF switch
- Movie/Music Mode Preset Button
- ON/AUTO/+12V Signal Sensing
Specifications
- Power Output:
- 1 x 700 WRMS @ 4-Ohm
- 1 x 400 WRMS @ 8-Ohm
- Frequency Response: 18Hz–160Hz
- Crossover Frequency: 40Hz–160Hz
- Output Connections:
- 5-Way Speaker Binding Posts
- RCA (DSP OUT)
- THD: < 0.02% (1W/4-Ohm)
- S/N:
- > 112dB (Balanced)
- > 108dB (Unbalanced)
- Load Impedance: 4 Ohm or greater
- Damping Factor: > 500
- Slew Rate: 50 V/ms
- Rack Mountable (1U space)
Note: The minimum rated impedance is 4-Ohm total. On the actual amp it specifies 4-Ohm minimum on each terminal. These terminals however operate as one meaning that you can either put a 4-Ohm load on one of them and none on the other OR put an 8-Ohm load on both of them resulting in a total impedance of 4-Ohm.
Dimensions
- H x W x D: 1.92″ (49mm) x 18″ (482.5mm) x 11.33″ (288mm)
- Includes feet, mounts, and protrusions
- Weight: 19.7 lbs (8.95 kgs)
Other Information
Model: XJ-700DSP
EAN: 0689759001973
Priced and sold by the pieceSKU: XJ-700DSP