Car Audio
Showing 1–24 of 124 results
-
Accessories, Car Audio
AK-5000 Installation Kit
Specifications
- Red Power Wire – 17 ft (5.18m)/4-Gauge
- Black Ground Wire – 3 ft (0.9m)/4-Gauge
- Speaker Wire – 20 ft (6.1m)/16-Gauge
- Blue Remote Turn ON Wire – 16 ft (4.8m)/16-Gauge
- Silver Twisted-Pair RCA Interconnect – 18 ft (5.5m)/Straight
- Black Split Loom – 6 ft (1.83m)/OD 13mm
- Gold Plated ANL Fuse Holder – ANL Fuse/150 A
- 4 x 4-Gauge Ring Terminals: 3 red/1 black
- 2 x 4-Gauge Spade Terminals: 1 red/1 black
- 5 x 16-Gauge Fork Terminals: 3 red/2 black
- 4 x 16-Gauge Female Disconnects: 2 red/2 black
- 1 x 16-22-Gauge Butt Connector for Remote Turn-ON Wire: 1 red
- 1 x Self Tapping Screw: 1 tinned
- 10 x Black Cable Ties, 120mm long
- 1 x Grommets in Black
Other Information
Model: AK-5000
EAN: 0689759101574
Priced and sold by the pieceSKU: AK-5000 -
Accessories, Car Audio
ANL In-Line Blade Fuses
Features
- Highly conductive copper alloy metal sheet construction with gold plated outer finish
- Link element is visible through clear window for quick verification of status
- Protects audio systems, circuits, ignition, wiring, and other high-current applications
- Compatible with all in-line ANL fuse holders and Earthquake’s FBNL-1 in-line fuse block holder
- Corrosion and heat resistance
Specifications
- Rated Voltage: For use on systems up to 32VDC
- Compatible with 12V and 24V systems
- Rated Current: 100 A, 150 A, 200 A, 250 A
- Fork Width: 0.75″ (19mm)
- U-shape Width: 0.33″ (8.3mm)
- Body Length: 1.42″ (36mm)
- Overall Size: 3.15″ (80mm) x 0.9″ (22.5mm) x 0.35″ (9mm)
Other Information
Priced and sold by the bag (set of 5 pieces)
SKU: n/a -
Home Audio, Marine Speakers, Outdoor/Indoor Speakers
AWS-502B/W (Pair)
Features
- 5.25″ (133mm) mica cone woofer with butyl rubber surround
- 1″ (25mm) ASV voice coil
- 3/4″ (20mm) PEI Mylar dome tweeter
- All rust-proof aluminum screws, brackets & grilles
- Extremely versatile molded PVC enclosure with UV protection
- Two mounting options: bookshelf or bracket
- Directional positioning for better sound dispersion
- Paintable to match any indoor or outdoor décor
- High power handling
- Gold plated binding posts
- Excellent for all applications including marine and PA systems
Specifications
- Power Rating: 20–125 Watts
- Frequency Response: 68Hz–20kHz
- Nominal Impedance: 8 Ohm
- Sensitivity: 90dB @ 1W/1M
Dimensions
- H x W x D: 9.44″ (240mm) x 7.20″ (183mm) x 6.57″ (167mm)
- Note: Depth includes mounting bracket
Other Information
Model: AWS-502B
UPC: 2148368975917
Priced and sold by the pairModel: AWS-502W
UPC: 2147368975910
Priced and sold by the pairSKU: AWS502B/W - 5.25″ (133mm) mica cone woofer with butyl rubber surround
-
Home Audio, Marine Speakers, Outdoor/Indoor Speakers
AWS-602B/W (Pair)
Features
- 6.5″ (165mm) mica cone woofer with butyl rubber surround
- 1″ (25mm) ASV voice coil
- 3/4″ (20mm) PEI Mylar dome tweeter
- All rust-proof aluminum screws, brackets & grilles
- Extremely versatile molded PVC enclosure with UV protection
- Two mounting options: bookshelf or bracket
- Directional positioning for better sound dispersion
- Paintable to match any indoor or outdoor décor
- High power handling
- Gold plated binding posts
- Excellent for all applications including marine and PA systems
Specifications
- Power Rating: 35–150 Watts
- Frequency Response: 65Hz–20kHz
- Nominal Impedance: 8-Ohm
- Sensitivity: 96dB @ 1W/1M
Dimensions
- H x W x D: 11.50″ (292mm) x 8.50″ (216mm) x 7.12″ (181mm)
- Note: Depth includes mounting bracket
Other Information
Model: AWS-602B
UPC: 2142668975912
Priced and sold by the pairModel: AWS-602W
UPC: 2142368975915
Priced and sold by the pairSKU: AWS602B/W - 6.5″ (165mm) mica cone woofer with butyl rubber surround
-
Car Audio, Home Audio, Marine Speakers, Marine Speakers, Outdoor/Indoor Speakers
AWS-802B/W (Piece)
Features
- 8″ (203mm) mica cone woofer with butyl rubber surround
- 1″ (25mm) ASV voice coil
- Tweeter: 1″ (25mm) PEI Mylar Dome
- All rust-proof aluminum screws, brackets & grilles
- Extremely versatile molded PVC enclosure with UV protection
- Two mounting options: bookshelf or bracket
- Directional positioning for better sound dispersion
- Paintable to match any indoor or outdoor décor
- High power handling
- Gold plated binding posts
- Excellent for all applications including marine and PA systems
Specifications
- Power Rating: 60–200 Watts
- Frequency Response: 55Hz–20kHz
- Nominal Impedance: 8 Ohm
- Sensitivity: 96dB@1W/1M
Dimensions
- HxWxD: 14.44″ (367mm) x 10.74″ (273mm) x 8.11″ (206mm)
- Note: Depth includes mounting bracket
Other Information
Model: AWS-802B
UPC: 2142568975913
Priced and sold by the pieceModel: AWS-802W
UPC: 2142468975914
Priced and sold by the pieceSKU: AWS-802B/W - 8″ (203mm) mica cone woofer with butyl rubber surround
-
Car Audio, DJ / Pro Audio, Horns & Tweeters, Pro Sound, Tweeters
BT44S Titanium Bullet Tweeter (PAIR)
Car Audio, DJ / Pro Audio, Horns & Tweeters, Pro Sound, TweetersBT44S Titanium Bullet Tweeter (PAIR)
Features
- Designed to add high output and high-frequency response to any speaker system
- Horn-loaded design provides dynamic and detailed sound
- 1″ (25mm) high-temperature ferrofluid cooled voice coil with Kapton™ former
- Controlled conical dispersion for reduced reflections
- Titanium diaphragm for precise and detailed response
- Durable die-cast aluminum housing
- In-line crossover capacitor included
- Front mount design for easy installation
Specifications
- Power Handling: 150 Watts Max
- Nominal Impedance: 4-Ohm
- Frequency Response: 2kHz–20kHz
- Sensitivity: 105dB
- Voice Coil Diameter: 1″ (25mm)
Dimensions
- Cutout Diameter: 3″ (76.2mm)
- Mounting Diameter: ø3-7/16″ (87mm)
- Mounting Depth: 2-1/8″ (53mm)
- Screw Hole Diameter: 4 x 3/16″ (5mm)
Parameters
- Re: 4.9 Ohm
- Fs: 2133Hz
- Qts: 1.24
- Qes: 3.25
- Qms: 1.99
- Le: 0.079mH (10KHz)
Other Information
Model: BT44S
EAN: 0168975910370
Priced and sold by the pairSKU: BT44S (Pair) -
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/Wireless
BT5.3NC
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/WirelessBT5.3NC
The Earthquake 2-in-1 BT5.3NC Bluetooth Audio Adapter serves as a transmitter or receiver that exhibits low distortion, low power consumption, low latency, and high-fidelity sound with stereo compatibility. Whether you seek wireless music streaming or hands-free communication, the BT5.3NC is the solution, as it seamlessly integrates with a broad range of audio systems, catering to both fixed home and portable audio setups. With its built-in microphones and noise-cancellation technology, you will enjoy crystal-clear calls from a distance at the touch of a button. Embrace the freedom, convenience, and portability of the Earthquake BT5.3NC, your ultimate audio companion.
SKU: BT5.3NC -
Car Audio, DJ / Pro Audio, Horns & Tweeters, Tweeters
BT90S Titanium Bullet Tweeter (PAIR)
Features
- Designed to add high output and high frequency response to any speaker system
- Horn-loaded design provides dynamic and detailed sound
- 1.75” (44mm) high-temperature ferrofluid cooled voice coil with Kapton™ former
- Controlled conical dispersion for reduced reflections
- Titanium diaphragm for precise and detailed response
- Durable die cast aluminum housing
- In-line crossover capacitor included
- Front mount design for easy installation
Specifications
- Power Handling: 300 Watts Max
- Nominal Impedance: 4-Ohm
- Frequency Response: 2kHz–20kHz
- Sensitivity: 110dB
- Voice Coil Diameter: 1.75″ (44mm)
Dimensions
- Overall Height: 2.75″ (70mm)
- Overall Width: 4.25″ (107mm)
- Cut Out Diameter: 3.77″ (96mm)
- Mounting Diameter: 4.17″ (106mm)
- Screw Hole Diameter: 0.17″ (4.5mm)
Other Information
Model: BT90S
EAN: 0168975910622
Priced and sold by the pieceSKU: BT90S (Pair) -
Bundles, Car Audio, Marine Speakers, Marine Speakers
BTA-250 Marine Bundle
The BTA-250 Marine Bundle offers installers a 2-ohm, 2 x 40W RMS solution for marine audio projects. The VTEK series of high-performance mobile audio speakers features a tri-layered carbon fiber cone body with an electroplated aluminum surface sealer that produces accurate and natural-sounding bass thanks to a linear drive magnet design and the excellent sound-propagating qualities of the woofers’ low mass cone. These are sound quality speakers designed to take the guessing game out of high-end speaker choices. Pair these coaxials with the BTA-250 in-wall amplifier, and you will have an excellent 2-channel stereo system for marine applications that offers Bluetooth® streaming in a convenient wall-mountable package.
SKU: BTA-250 Marine Bundle -
Accessories, Car Audio
DB-0224 Power Distribution Block
Features
- Machine tooled solid brass block with highly conductive platinum plated finish
- Designed for high current applications and maximum power delivery
- Clear plastic outer cover
Specifications
- Input
- One 1/0 AWG
- Outputs
- One 2 AWG
- Two 4 AWG
- Two 8 AWG
Dimensions
- 2.55″ (65mm) x 2.16″ (55mm) x 1.22″ (31mm)
Other Information
Model: DB-0224
UPC: 0168975910738
Priced and sold by the pieceSKU: DB-0224 -
Car Audio, DJ / Pro Audio, Subwoofers, Subwoofers
DBXi-12D
DBXi-12D showcases the use and adaptation of extremely advanced technology. DBXi simplifies the choice for serious bass enthusiasts. Deciding whether the subwoofer should be an SPL or SQL design is no longer necessary. DBXi provides high SPL while remaining fast, accurate, and musical. Innovative technology and a revolutionary machining process are key elements of the DBXi design. This enables us to produce a subwoofer capable of thunderous deep bass with speed, precision, and articulation.
SKU: DBXi-12D -
Car Audio, DJ / Pro Audio, Subwoofers, Subwoofers
DBXi-15D
DBXi-15D showcases the use and adaptation of extremely advanced technology. DBXi simplifies the choice for serious bass enthusiasts. Deciding whether the subwoofer should be an SPL or SQL design is no longer necessary. DBXi provides high SPL while remaining fast, accurate, and musical. Innovative technology and a revolutionary machining process are key elements of the DBXi design. This enables us to produce a subwoofer capable of thunderous deep bass with speed, precision, and articulation.
SKU: DBXi-15D -
Car Audio, Open Box
DBXi-15D (Open-Box)
Features
- 15″ cast subwoofer
- power Rating: 750 WRMS / 2000 MAX
- Dual 4-Ohm voice coil
- 3″ Aluminum bobbin
- Super Wide Edge (SWE) Surround
- Patented TCT™ (Turbine Cooled Transducer) Technology
- 150 oz. double stacked magnet
Parameters
- Fs: 12Hz
- Qes: 1.14
- Qms: 5.99
- Qts: .45
- Xmax: 3.5″ (88.9mm)
- Efficiency (1w/1M): 88dB SPL
- Revc: 4.0 Ohm
- Bl: 26.8TM
- Vas: 3.217 ft³ 9(91.1 L)
Please Note: This is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: DBXi 15D B-Stock -
Car Audio, Equalizers & Processors
EQ-4000BT v2
Features
- 4 Adjustable Bands of Equalization (-12dB to +12dB)
- 4 Input Sources (RCA, AUX, mini jack, Bluetooth™)
- 3 Stereo RCA Outputs (Front, Rear, Sub)
- 9 Volt RMS Output
- Input Gain Control
- Media Player Ready
- Fully Retractable Controls
- Volume Level Control
- Subwoofer Level Control
- Subwoofer Frequency Control
- Front Panel MAIN/AUX Control
- Front Panel Bluetooth ON/OFF Control
- Fader Action Control
- Blue Background LED
- Mounting Hardware and 1A Fuse Included
- 3 Pin Plug-in PCB Screw Terminal Block Connector Included
Specifications
- Operating Voltage: 10.5–16VDC
- Idle: 280 mA
- Recommended Fuse Size: 1 Ampere
- Input Sensitivity: 100 mVrms up to 14 Vrms
- Input Impedance: 8 kOhm up to 10.2 kOhm
- Output Impedance:
- Sub Channel: 510 Ohm
- Front & Rear Channels: 6.3 kOhm
- Output Level:
- Sub Channel 5 Vrms @ 0.1% THD
- Front & Rear Channels 4 Vrms @ 0.1% THD
- THD @ 3 Volts Output: 0.05%
- Frequency Response: 15Hz–34kHz @ -3dB
- Sub Frequency Control Range: 35–120Hz @ -3dB, 18dB/Oct.
- Sub Upper Cut Off Frequency: 100Hz
- Signal-to-Noise Ratio: 68dB
- Center Frequencies: 92dB
- Control Range: 150Hz, 550Hz, 2.5kHz, 15kHz
- Channel Separation: 30–40dB (12 O’clock is bypass position)
- Din Size: 1/2 Din
Other Information
Model: EQ-4000BT v2
EAN: 0689759101598
Priced and sold by the pieceSKU: EQ-4000BT v2 -
Car Audio, DJ / Pro Audio, Midrange Speakers, Pro Sound
EQ108 (PAIR)
Features
- 10″ (254mm) midrange/midbass driver offers maximum musical output and efficiency
- 2.5″ (63.5mm) edge-wound aluminum bobbin voice coil with Kapton® polyimide former
- Long-lasting non-pressed paper cone for reduced break-up
- Produces natural tones at high levels with low distortion
- Solid composition paper dust cap
- Heavy-duty ferrite magnet with extended core
- Multi-roll cloth surround
- Black stamped steel basket
- Bumped back plate
Specifications
- Power Handling: 300W Max
- Frequency response: 47Hz–10kHz
- Impedance: 8 Ohm
- Sensitivity: 94dB
- Resonance: 46Hz
Parameters
- Resonant Frequency (Fs): 46Hz
- DC Resistance (Re): 6.8 Ohms
- Coil Inductance at Fs (Lces): 0.857 mH
- Mechanical Q (Qms): 6.04
- Electromagnetic Q (Qes): 0.43
- Total Q (Qts): 0.40
- Compliance Equivilant Volume (Vas): 60.1 Liters / 2.1 cu. ft.
- Mechanical Compliance of Suspension (Cms): 0.18mm/N
- BL Product (BL): 13.6 T-M
- Diaphram Mass (Mmd): 35.9 grams
- Surface Area of Cone (Sd): 0.0380 sqM
- Maximum Linear Excursion (Xmax): 4.0mm
Dimensions
- Overall Dimensions: 10.157″ (258.5mm)
- Cutout Diameter: 9.25″ (235mm)
- Mounting Hole Diameter: 0.28″ (7.2mm) x 0.20″ (5.2mm)
- Mounting Depth: 4.15″ (105.5mm)
Other Information
Model: EQ108
UPC: 0168975910226
Priced and sold by the pairSKU: EQ108 (PAIR) -
Car Audio, DJ / Pro Audio, Midrange Speakers, Pro Sound
EQ10S8 (PAIR)
EQ10S8 Cloth Surround Speaker
The Earthquake EQ10S8 Cloth Surround Speaker is part of the EQ line of maximum musical output drivers. These drivers were specifically designed to provide smooth, low distortion midrange/midbass output for the highest-quality sound reinforcement applications. Because of their relatively high resonance and very low Qts value, the EQ line can be mounted in small enclosures while maintaining a smooth, peak-free resonance.
The EQ10S8 driver is fitted with a sealed back basket that acts like a protective barrier to eliminate interference from other components that may be loaded into the same enclosure. This feature allows the speaker to maintain its integrity and performance, resulting in high-fidelity sound preservation and reduced distortion.
SKU: EQ10S8 (Pair) -
Car Audio, DJ / Pro Audio, Midrange Speakers, Pro Sound
EQ128 (PAIR)
Features
- 12″ (310mm) midrange/midbass driver offers maximum musical output and efficiency
- 2.5″ (63.5mm) edge-wound aluminum bobbin voice coil with Kapton® polyimide former
- Long-lasting non-pressed paper cone for reduced break-up
- Produces natural tones at high levels with low distortion
- Solid composition paper dust cap
- Heavy-duty ferrite magnet with extended core
- Multi-roll cloth surround
- Black stamped steel basket
- Bumped back plate
- Vented T-Yoke
Specifications
- Power Handling: 400W Max
- Frequency response: 35Hz–4.5kHz
- Impedance: 8 Ohm
- Sensitivity: 96.5dB (2.83V/1M)
- Resonance: 51Hz
Parameters
- Resonant Frequency (Fs): 51Hz
- DC Resistance (Re): 5.2 Ohms
- Coil Inductance at Fs (Lces): 38.37 mH
- Mechanical Q (Qms): 8.95
- Electromagnetic Q (Qes): 0.42
- Total Q (Qts): 0.41
- Compliance Equivilant Volume (Vas): 91.6 Liters / 0.20 cu. ft.
- Mechanical Compliance of Suspension (Cms): 0.23 mm/N
- BL Product (BL): 12.84 T-M
- Diaphram Mass (Mmd): 35.2 grams
- Surface Area of Cone (Sd): 0.0531 sqM
- Maximum Linear Excursion (Xmax): 4.0mm
Dimensions
- Overall Dimensions: 12.25″ (310mm)
- Cutout Diameter: 11.18″ (284mm)
- Mounting Hole Diameter: 0.25″ (6.5mm) x 0.35″ (9mm)
- Mounting Depth: 4.84″ (123mm)
Other Information
Model: EQ128
UPC: 0168975910349
Priced and sold by the pairSKU: EQ128 (PAIR) -
Car Audio, DJ / Pro Audio, Midrange Speakers, Pro Sound
EQ12S8 (PAIR)
EQ12S8 Cloth Surround Speaker
The Earthquake EQ12S8 Cloth Surround Speaker is a part of the EQ line of maximum musical output drivers that were specifically designed to provide smooth, low distortion midrange/midbass output for the highest-quality sound reinforcement applications. Because of their relatively high resonance and very low Qts value, the EQ line can be mounted in small enclosures while maintaining a smooth, peak-free resonance.
The EQ12S8 driver is fitted with a sealed back basket that acts like a protective barrier to eliminate interference from other components that may be loaded into the same enclosure. This feature allows the speaker to maintain its integrity and performance, resulting in high-fidelity sound preservation and reduced distortion.
SKU: EQ12S8 (PAIR) -
Car Audio, DJ / Pro Audio, Midrange Speakers, Pro Sound
EQ5S8 (PAIR)
EQ5S8 Cloth Surround Speaker
The Earthquake EQ5S8 Cloth Surround Speaker is part of the EQ line of maximum musical output drivers. These drivers were specifically designed to provide smooth, low distortion midrange/midbass output for the highest-quality sound reinforcement applications. Because of their relatively high resonance and very low Qts value, the EQ line can be mounted in small enclosures while maintaining a smooth, peak-free resonance.
The EQ5S8 driver is fitted with a sealed back basket that acts like a protective barrier to eliminate interference from other components that may be loaded into the same enclosure. This feature allows the speaker to maintain its integrity and performance, resulting in high-fidelity sound preservation and reduced distortion.
SKU: EQ5S8 (PAIR) -
Car Audio, DJ / Pro Audio, Midrange Speakers, Pro Sound
EQ68 (PAIR)
Features
- 6.5″ midrange/midbass driver offers maximum musical output and efficiency
- 1.39″ (35.5mm) edge-wound aluminum bobbin voice coil with Kapton® polyimide former
- Long-lasting non-pressed paper cone for reduced break-up
- Produces natural tones at high levels with low distortion
- Solid composition paper dust cap
- Heavy-duty ferrite magnet with extended core
- Multi-roll cloth surround
- Black stamped steel basket
- Bumped back plate
Specifications
- Power Rating: 200W Max
- Frequency Response: 112Hz–10kHz
- Impedance: 8 Ohm
- Sensitivity: 96dB
- Resonance: 112.4Hz
Parameters
- Resonant Frequency (fo): 112.375Hz ±15%
- DC resistance (Re): 6.8 Ohms
- Coil Inductance (Le): 396.050 mH @ 1kHz
- Mechanical Q (Qms): 4.999
- Electromagnetic Q (Qes): 0.958
- Total Q (Qts): 0.804
- Compliance Equivalent Volume (Vas): 4.122 L / 0.14 cu. ft.
- Mechanical Compliance of Suspension (Cms): 159.797 mm/N
- BL Product (BL): 7.932 T-M
- Diaphragm Mass (Mmd): 11.653 grams
- Maximum Linear Excursion (Xmax): 3.5mm
- Surface Area of Cone (Sd): 134.782 sqM
Dimensions
- Overall Diameter: 6.61″ (168mm)
- Cut Out Diameter: 5.66″ (144mm)
- Mounting Holes Diameter: 0.27″ (4-5.5mm) x 0.21″ (6.8mm)
- Mounting Depth: 2.63″ (66.9mm)
Other Information
Model: EQ68
UPC: 0168975910356
Priced and sold by the pairSKU: EQ68 (PAIR) -
Car Audio, DJ / Pro Audio, Midrange Speakers, Pro Sound
EQ6S8 (PAIR)
EQ6S8 Cloth Surround Speaker
The Earthquake EQ6S8 Cloth Surround Speaker is part of the EQ line of maximum musical output drivers. These drivers were specifically designed to provide smooth, low distortion midrange/midbass output for the highest-quality sound reinforcement applications. Because of their relatively high resonance and very low Qts value, the EQ line can be mounted in small enclosures while maintaining a smooth, peak-free resonance.
The EQ6S8 driver is fitted with a sealed back basket that acts like a protective barrier to eliminate interference from other components that may be loaded into the same enclosure. This feature allows the speaker to maintain its integrity and performance, resulting in high-fidelity sound preservation and reduced distortion.
SKU: EQ6S8 (PAIR) -
Car Audio, DJ / Pro Audio, Midrange Speakers, Pro Sound
EQ84 (PAIR)
Features
- 8″ midrange/midbass driver offers maximum musical output and efficiency
- 2″ (50.8mm) edge-wound aluminum bobbin voice coil with Kapton® polyimide former
- Long-lasting non-pressed paper cone for reduced break-up
- Produces natural tones at high levels with low distortion
- Solid composition paper dust cap
- Heavy-duty ferrite magnet with extended core
- Multi-roll cloth surround
- Black stamped steel basket
- Vented T-Yoke
- Bumped back plate
Specifications
- Power Rating: 80W Max
- Frequency Response: 68Hz–10kHz
- Impedance: 4 Ohm
- Sensitivity: 97dB
- Resonance: 68Hz ±15%
Parameters
- Resonant Frequency (fo): 87.763Hz ±15%
- DC resistance (Re): 3.800 Ohms
- Coil Inductance (Le): 272.716 mH @ 1kHz
- Mechanical Q (Qms): 6.324
- Electromagnetic Q (Qes): 0.330
- Total Q (Qts): 0.313
- Compliance Equivalent Volume (Vas): 21.004 L / 0.7417 cu. ft.
- Mechanical Compliance of Suspension (Cms): 316.733 mm/N
- BL Product (BL): 8.002 T-M
- Diaphragm Mass (Mmd): 16.843 grams
- Maximum Linear Excursion (Xmax): 4mm
- Surface Area of Cone (Sd): 218.424 sqM
Dimensions
- Overall Diameter: 8.24″ (209.5mm)
- Cut Out Diameter: 7.08″ (180mm)
- Mounting Holes Diameter: 0.19″ (5mm) x 0.35″ (9mm)
- Mounting Depth: 3.51″ (89.3mm)
Other Information
Model: EQ84
UPC: 3002168975913
Priced and sold by the pairSKU: EQ84 (PAIR) -
Car Audio, DJ / Pro Audio, Midrange Speakers, Pro Sound
EQ88 (PAIR)
Features
- 8″ midrange/midbass driver offers maximum musical output and efficiency
- 2″ (50.8mm) edge wound copper voice coil construction with Kapton® polyimide former
- Long-lasting non-pressed paper cone for reduced break-up
- Produces natural tones at high levels with low distortion
- Solid composition paper dust cap
- Ferrite magnet with extended core
- Multi-roll cloth surround
- Black stamped steel basket
- Bumped back plate
- Vented T-Yoke
Specifications
- Power Handling: 250W Max
- Frequency response: 86Hz–10kHz
- Impedance: 8 Ohm
- Sensitivity: 94dB
- Resonance: 86.6Hz
Parameters
- Resonant Frequency (Fo): 86.6Hz ±15%
- DC Resistance (Re): 7.2 Ohms
- Coil Inductance (Le): 463.207 mH
- Mechanical Q (Qms): 8.067
- Electromagnetic Q (Qes): 0.454
- Total Q (Qts): 0.429
- Compliance Equivalent Vol (Vas): 11.696 L / 0.41 cu. ft.
- Mechanical Compliance of Suspension (Cms): 175.843 mm/N
- BL Product (BL): 12.884 T-m
- Diaphragm Mass (Mmd): 17.399 grams
- Maximum Linear Excursion (Xmax): 3.2mm
- Surface Area of Cone (Sd): 216.424 sqM
Dimensions
- Overall Diameter: 8.25″ (209.5mm)
- Cutout Diameter: 7.08″ (180mm)
- Mounting Hole Diameter: 0.19″ x 0.35″” (5mm x 9mm)
- Mounting Depth: 3.46″ (88mm)
Other Information
Model: EQ88
UPC: 0168975910127
Priced and sold by the pairSKU: EQ88 (PAIR)
