Open Box
Showing 1–24 of 30 results
-
Car Audio, Open Box
DBXi-15D (Open-Box)
Features
- 15″ cast subwoofer
- power Rating: 750 WRMS / 2000 MAX
- Dual 4-Ohm voice coil
- 3″ Aluminum bobbin
- Super Wide Edge (SWE) Surround
- Patented TCT™ (Turbine Cooled Transducer) Technology
- 150 oz. double stacked magnet
Parameters
- Fs: 12Hz
- Qes: 1.14
- Qms: 5.99
- Qts: .45
- Xmax: 3.5″ (88.9mm)
- Efficiency (1w/1M): 88dB SPL
- Revc: 4.0 Ohm
- Bl: 26.8TM
- Vas: 3.217 ft³ 9(91.1 L)
Please Note: This is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: DBXi 15D B-Stock -
Car Audio, Open Box
Focus F5.25 (Open-Box)
Features
- Low mass poly injection cone bodies for top-notch accuracy & sound quality
- High flow ventilation stamped steel basket design
- Overhung butyl rubber surround with PistonMax Technology increases musical output and accuracy
- NOMEX / ROMEX spider assemblies for a strong, durable, and more linear suspension
- Shallow mounting design for American and foreign cars And trucks
- Swiveling 20mm silk dome tweeters with Neodymium magnets
Specifications
- 5.25 in. high-end 2-way coaxial speaker
- Power Handling: 300 Watts MAX
- Frequency Response: 30Hz–22kHz (±3dB)
- Sensitivity: 87 dB @ 1W/1M
- Nominal Impedance: 4-Ohm
Dimensions
- Overall Height: 2.63 in. (67 mm)
- Overall Diameter: 5.23 in. (133 mm)
- Motor Diameter: 3.5 in. (89 mm)
- Cutout Hole Diameter: 4.44 in. (113 mm)
- Mounting Depth: 2 in. (51 mm)
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: FOCUS F5.25 (B-Stock) -
Car Audio, Open Box
Focus FC5.2 Component Set (Open-Box)
Features
- Low mass poly injection cone bodies for accuracy and sound quality
- High flow ventilation stamped steel basket design
- Over hung butyl rubber surround for more bass output
- NOMEX/ROMEX spider assemblies for strong durable suspension
- Shallow mount designs for American & foreign cars and trucks
- Multiple Tweeter Mounting Configurations: Flush, surface, and surface angle
- Two-way passive crossover network with high-quality, low-tolerance capacitor
Specifications
- 5.25″ Focus component set with tweeters and passive Crossovers
- Power Handling: 500 Watts MAX
- Frequency Response: 35Hz–22kHz
- Sensitivity: 87dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Depth: 2″
Tweeters
- Silk dome with neodymium motor
- Diameter: 1-1/2″ (38mm)
- Impedance: 4-Ohm
- Frequency Response 1kHz–22kHz
Crossovers
- Crossover Frequency 3200Hz @ 4-Ohm
- Crossover Slope: 24dB/octave High-Pass, 12dB/octave Low-Pass
- Poly Switch Tweeter Protection
In The Box
- x2 5″ (127mm) Focus 5.25 poly cone woofers
- x2 1″ (25mm) Focus TW-25S silk dome tweeters
- x2 Focus crossover networks
- x2 metal woofer grilles with trays
- x2 compact flush-mount fixtures
- x2 compact angle-mount fixtures
- x8 1.5″ (38mm) wood screws
- x8 custom installation mounting clips
- x8 1″ (25mm) sheet metal screws
- x8 factory installation mounting clips
- x2 1″ (25mm) machine screws
- x2 metal spring clips for tweeter fixtures
- x4 speaker wire bundles with pre-attached connectors
SKU: Focus FC5.2 (B-Stock) -
Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Open Box, Open Box, Open Box, Open Box
GLI-200 (Open-Box)
Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Open Box, Open Box, Open Box, Open BoxGLI-200 (Open-Box)
Specifications
- Eliminates Hum or Ground Loop Noise
- Home, Mobile, and Pro Audio Compatible
- RCA Inputs and Outputs
- 600Ω Impedance Industry Standard
- Compact Rugged Construction
PRODUCT DIMS
- Height: 2.85″ (72.49mm)
- Width: 3.32″ (84.45mm)
- Depth: 1.35″ (34.33mm)
PLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: GLI-200 (B-Stock) -
Car Audio, Open Box
i82SWS (Open Box)
The i82SWS is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 8-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability.
SKU: i82SWS (B-Stock) -
Car Audio, Open Box
Magma-12X (Open-Box)
Specifications
- SWE 12″ Subwoofer
- 1000 Watt Max
- 500 Watt RMS
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor in with the cold air and out with the hot air
- Super thick motor to assist long excursion – 2” thick
- PBP (Perforated Back Plate) that circulate cold air into the gap
SKU: Magma-12X (B-Stock) -
Car Audio, Open Box
Magma-15X (Open-Box)
Specifications
- SWE 15″ Subwoofer
- 1500 Watt Max
- 700 Watt RMS
- 4 Ohm
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor in with the cold air and out with the hot air
- Super thick motor to assist long excursion – 2” thick
- PBP (Perforated Back Plate) that circulate cold air into the gap
SKU: Magma-15X (B-Stock) -
Car Audio, Open Box
MiNi D1000 1st Gen (Open-Box)
Features
- Clip Suppression technology
- Bridge-Link feature with two Mini D amplifiers (of same model)
- Fan free operation
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1000 Watts
- RMS Power
- RMS Power 1-Ohm: 600 Watts
- RMS Power 2-Ohm: 360 Watts
- RMS Power 4-Ohm: 180 Watts
- 0 – 12dB (30-80Hz) Bass Boost – available on the D2000 and D2500 models
- Variable Subsonic Filter
- 40-180Hz LPF (Low Pass Filter)
- Gain Control
- Remote Gain Level Control
- Fuse Rating: 40A (included)
Dimensions
- Dimensions (H x W x D): 1-7/8″ (48mm) x 7″ (177mm) x 6-5/16″ (160mm)
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000 1st Gen (B-Stock) -
Car Audio, Open Box
MiNi D1000 2nd Gen (Open-Box)
Features
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Comes complete with remote base knob and cable (over 20ft)
- Power and Protection LED
- Variable Subsonic Filter
- Gain Control
- Remote Gain Level Control
- Clip Suppression Technology
- Bridge-Link
- Fan Free Operation
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1000 Watts
- RMS Power
- RMS Power 1-Ohm: 600 Watts
- RMS Power 2-Ohm: 360 Watts
- RMS Power 4-Ohm: 180 Watts
- 0–12dB (30–80Hz) Bass Boost
- 40–180Hz LPF (Low Pass Filter)
Dimensions
- (H x W x D): 1-15/16″ (49mm) x 6-5/16″ (160mm) x 9-7/8″ (250mm)
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000 2nd Gen (B-Stock) -
Car Audio, Open Box
MiNi D1000.4 1st Gen (Open-Box)
Features
- Clip suppression technology to avoid hard clipping
- Fan free operation with stellar efficiency negates the need for noisy fans
- User selectable high and low pass crossovers with variable crossover frequency
- Boost function, enables up to 12 dB boost of the chosen crossover frequency
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 1000 Watts
- RMS Power:
- 4 x 65W @ 4-Ohm
- 4 x 90W @ 2-Ohm
- 2 x 190W @ 4-Ohm Bridged
- Channel Separation: 80dB
- Crossover Frequencies: 40–400Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 2 x 20A (included)
Dimensions
(H x W x D): 1-7/8″ (48mm) x 7-1/16″ (180.5mm) x 6-5/16″
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000.4 1st Gen (B-Stock) -
Car Audio, Open Box
MiNi D1000.4 2nd Gen (Open-Box)
Features
- Clip Suppression technology to avoid hard clipping
- Fan free operation with stellar efficiency negates the need for noisy fans
- User selectable high and low pass crossovers with variable crossover frequency
- Boost function, enables up to 15dB boost of the chosen crossover frequency
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 1000 Watts
- RMS Power:
4 x 85W @ 4-Ohm
4 x 120W @ 2-Ohm
2 x 200W @ 4-Ohm Bridged - Frequency Response: 20–20kHz
- Signal-to-Noise Ratio: >100dB
- Bass Boost: 0–15dB
- THD+N: < 1%
- Fuse Rating: 1 x 60A (included)
Dimensions
- (H x W x D): 1-15/16″ (48.5mm) x 7-15/16″ (202mm) x 6-15/16″ (160mm)
SKU: MiNi D1000.4 2nd Gen (B-Stock) -
Car Audio, Open Box
MiNi D1500.2 1st Gen (Open-Box)
Specifications
- Channels: 2
- Class: Digital Class “D”
- Max Power: 1500 Watts
- RMS Power:
2 x 130W @ 4-Ohm
2 x 180W @ 2-Ohm
1 x 360W @ 4-Ohm Bridged - Channel Separation: 80dB
- Crossover Frequencies: 20 – 500Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 2 x 30A (included)
- Dimensions (H x W x D): 2-1/16″ (52mm) x 8″ (202.5mm) x 8-1/4″ (210mm)
SKU: MiNi D1500.2 1st Gen (B-Stock) -
Car Audio, Open Box
MiNi D2000 1st Gen (Open-Box)
Specifications
- Channels: 1 (MONO)
- Class: Digital Class “D”
- Max Power: 2000 Watts
- RMS Power:
1200 Watts @ 1-Ohm
1000 Watts @ 2-Ohm
650 Watts @ 4-Ohm - Fuse Rating: 80A (required)
- Dimension (H x W x D): 1-7/8″ (48mm) x 8-1/4″ (286mm) x 6-5/16″ (160mm)
SKU: MiNi D2000 1st Gen (B-Stock) -
Car Audio, Open Box
MiNi D2500 (Open-Box)
Specifications
- Channels: 1 (MONO)
- Class: Digital Class “D”
- Max Power: 2000 Watts
- RMS Power:
2000 Watts @ 1-Ohm
1800 Watts @ 2-Ohm
850 Watts @ 4-Ohm - Fuse Rating: 100A (required)
- Dimensions (H x W x D): 1-7/8″ (48mm) x 12-13/16″ (325mm) x 6-5/16″ (160mm)
SKU: MiNi D2500 (B-Stock) -
Car Audio, Open Box
MiNi D3000.4 1st Gen (Open-Box)
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 3000 Watts
- RMS Power:
4 x 130W @ 4-Ohm
4 x 180W @ 2-Ohm
2 x 360W @ 4-Ohm bridged - Channel Separation: 90dB
- Crossover Frequencies: 20 – 500Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 3 x 35A (included)
- Dimensions (H x W x D): 2-1/16″ (52mm) x 11-5/8″ (295mm) x 8-5/16″ (212mm)
SKU: MiNi D3000.4 1st Gen (B-Stock) -
Car Audio, Open Box
MiNi D3000.4 2nd Gen (Open-Box)
Features
- Clip suppression technology to avoid hard clipping so in the event of excessive input the sound will not get harsh.
- Fan free operation negates the need for noisy fans even when driven continuously 2db into clip the Mini D will not overheat.
- ST or 4CH input switch for using the amp in either 2 channel or 4 channel operation.
- Auto ON signal sensing allows the amplifier to wake up on signal and fall asleep when not in use.
- User selectable high & low pass crossovers with variable crossover frequency.
- High and low pass multiplier button offers users great flexibility for a variety of wiring configurations.
- MARS status LED lights up when it has detected an anomaly and when the unit is initially powered up and going through self analyzing mode.
Specifications
- Number of Channels: 4
- Class: Digital Class D
- Max Power: 3000 Watts
- RMS Power:
- 4 x 120W @ 4-Ohm
- 4 x 200W @ 2-Ohm
- 2 x 300W @ 4-Ohm bridged
- Gain Level Control: 0.2V–6V RMS
- Channel Separation: > 90dB
- THD+N: < 1%
- Crossover Frequencies:
- High Pass Filter: 20Hz–400Hz
- x10 Button Engaged: 200Hz–4kHz
- Low Pass Filter: 50Hz–500Hz
- x10 Button Engaged: 500Hz–5kHz
- High Pass Filter: 20Hz–400Hz
- Signal-to-Noise Ratio: 98dB
- Fuse Rating: 2 x 40A (included)
- F and R RCA Line Inputs
- HPF/Flat/BPF Filter Switch
- Power and protection LED indicators
Dimensions
- H x W x D: 2.48″ (63mm) x 11.22″ (285mm) x 8.26″ (210mm)
- Width includes mounting feet
Other Information
Model: MiNi-D3000.4 2nd Gen
EAN: 0689759101079
Priced and sold by the pieceSKU: MiNi D3000.4 2nd Gen-(B-Stock) -
Car Audio, Open Box
Subzero 10 (B-Stock)
Specifications
- 1500 Watts Max
- 750 Watts RMS
- REVC = 7.7 Ohm
- LEVC = 4.9888 mH
- Fo = 28.7195 Hz
- Sd = 33 msqM
- BL = 17.5913 TM
- Qms = 1.4489
- Qes = 0.6994
- Qts = 0.4717
- SPLo = 82 dB
- No = 0.0995821%
- Vas = 1.083 Ft3
- Mechanical Xmax = 3″ peak to peak
- Electrical Xmax = 1.5″ peak to peak
- Cms = 197.1628 uM/N
- Mms = 155.762g
- Mmd = 152.3169g
SKU: Subzero 10 (B-Stock) -
Car Audio, Open Box
SWS-10X Shallow Subwoofer (Open-Box)
Features
- 10″ high-performance shallow subwoofer
- Low profile mount for placement anywhere
- Inverted style cone design for a maximum excursion in shallow mount applications
- High-temperature voice coil with heat-sink attachment
- NOMEX/ROMEX spider assembly
- Protected by multiple U.S. patents
- Aluminum bobbin
Specifications
- Power handling: 200 Watts RMS / 400 Watts MAX
- Impedance: 4-Ohm
- Mounting depth: 2.67″ (68mm)
- Cut-out hole diameter: 9″ (228mm)
- Voice Coil Diameter: 2″ (50.8mm)
- Weight: 11 lbs
- Sensitivity: 88.2dB
Parameters
- Revc: 3.500Ohm
- Fs: 34.289Hz
- Sd: 33.000msqM
- BL: 14.197TM
- Qms: 4.038
- Qes: 0.461
- Qts: 0.414
- No: 0.00229%
- SPLo: 85.6dB
- Vas: 954.631mcuFt
- Cms: 174.809uM/N
- Krm: 136.839mOhm
- Erm: 1.215
- Mms: 123.245g
- Mmd: 119.798mKg
- Kxm: 17.238mOhm
- Exm: 0.697
- Xmax: 0.26 in (6.75mm)
- Xmech: 1.10 in (28mm)
- Xmax measured in one direction)
Recommended Sealed Internal Volume
- Minimum: 0.38cu.ft. (10.76Ltr)
- Maximum: 0.75cu.ft. (21.23Ltr)
- Assuming 3/4″ MDF is being used
Other Information
Model: SWS-10X
UPC: 0168975910196
Priced and sold by the piecePlease Note: This is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: SWS-10X (B-Stock) -
Car Audio, Open Box
SWS-12X (Open-Box)
Features
- 12″ high-performance shallow subwoofer
- Low profile mount for placement anywhere
- Inverted style cone design for maximum excursion in shallow mount applications
- High temperature voice coil with heat-sink attachment
- NOMEX/ROMEX spider assembly
- Protected by multiple U.S. patents
- Aluminum bobbin
Specifications
- Power Handling:
- 300 WRMS
- 600 MAX
- Impedance: 4-Ohm
- Sensitivity: 89.4dB
- Voice Coil Diameter: 2.5″ (63.5mm)
- Cut Out Hole Diameter: 11-3/8″ (288mm)
- Mounting Depth: 3″ (75mm)
- Weight: 13 lbs (5.89 kgs)
Parameters
- Fs: 24Hz
- Revc: 3.75 Ohms
- Fo (Hz): 24.006
- Sd. (msqM): 53.000
- BL. (TM): 10.642
- Qms: 3.56
- Qes: 0.515
- Qts: 0.45
- SPLo. (dB): 89.4
- Vas. (Ltr): 149.612
- Xmax (mm): 31
Note: (Xmax Measured In One Direction)
Please Note: This is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: SWS-12X (B-Stock) -
Car Audio, Open Box
SWS-8X (Open-Box)
Features
- 8″ high-performance shallow subwoofer
- Low profile mount for placement anywhere
- Inverted style cone design for a maximum excursion in shallow mount applications
- High-temperature voice coil with heat-sink attachment
- NOMEX/ROMEX spider assembly
- Protected by multiple U.S. patents
- Aluminum bobbin
Specifications
- Power handling: 150 Watts RMS / 300 Watts MAX
- Impedance: 4-Ohm
- Mounting depth: 2-1/8″ (52mm)
- Cut-out hole diameter: 8-1/8″ (206mm)
- Voice Coil Diameter: 1-1/2″ (38mm)
- Weight: 8 lbs
- Sensitivity: 86.7dB
Recommended Sealed Internal Volume
- Minimum: 0.2cu.ft. (5.66Ltr)
- Maximum: 0.6cu.ft. (16.99Ltr)
- Assuming 3/4″ MDF is being used
Parameters
- Revc: 3.500Ohm
- Fs: 43.033Hz
- Sd: 22.000msqM
- BL: 6.728TM
- Qms: 3.961
- Qes: 1.545
- Qts: 1.112
- No: 0.00063%
- SPLo: 80.0dB
- Vas: 449.071mcuFt
- Cms: 185.023uM/N
- Krm: 4.394mOhm
- Erm: 0.717
- Mms: 73.928g
- Mmd: 72.052mKg
- Kxm: 14.331mOhm
- Exm: 0.545
- Xmax: 0.20 in (5.2mm)
- Xmech: 0.90 in (23mm)
- Xmax measured in one direction)
Other Information
Model: SWS-8X
UPC: 0168975910189
Priced and sold by the piecePLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: SWS-8X (B-Stock) -
Car Audio, Open Box
SWS-8Xi (Open-Box)
Features
- 8″ high-performance shallow subwoofer
- R8SWS mounting ring included
- Low profile mount for placement anywhere
- Inverted style cone design for a maximum excursion in shallow mount applications
- High-temperature voice coil with heat-sink attachment
- NOMEX/ROMEX spider assembly
- Protected by multiple U.S. patents
- Aluminum bobbin
Specifications
- Power handling: 150 Watts RMS / 300 Watts MAX
- Impedance: 2-Ohm matching factory-installed BMW speakers
- Mounting depth: 2-1/8″ (52mm)
- Cut-out hole diameter: 8-1/8″ (206mm)
- Voice Coil Diameter: 1-1/2″ (38mm)
- Weight: 8 lbs
- Sensitivity: 86.7 dB
Recommended Sealed Internal Volume
- Minimum: 0.2cu.ft. (5.66Ltr)
- Maximum: 0.6cu.ft. (16.99Ltr)
- Assuming 3/4″ MDF is being used
Parameters
- Revc: 1.800Ohm
- Fs: 42.796Hz
- Sd: 22.000msqM
- BL: 5.970TM
- Qms: 6.457
- Qes: 1.037
- Qts: 0.893
- No: 0.00091%
- SPLo: 81.6dB
- Vas: 439.615mcuFt
- Cms: 181.127uM/N
- Krm: 612.228uOhm
- Erm: 0.976
- Mms: 76.357g
- Mmd: 74.481mKg
- Kxm: 12.692mOhm
- Exm: 0.645
- Xmax: 0.90 in (23mm)
- Xmax measured in one direction)
Other Information
Model: SWS-8Xi
UPC: 0168975910165
Priced and sold by the piecePLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: SWS-8Xi (B-Stock) -
Car Audio, Open Box
T46 Coaxial Speaker (B-Stock)
Features
- Low Mass Poly Injection Cone Bodies that Deliver Precision Sound Quality
- High Flow Ventilation Stamped Steel Basket Design
- Large Butyl Rubber Surround
- 12dB/Octave crossover
- NOMEX / ROMEX Spider Assemblies For Linear Travel & Durability
- Shallow Mount Designs For American & Foreign Cars And Trucks
- Over 1″ (30mm) Mylar Super Tweeters that Delivers Exceptionally High Frequencies for All Ranges of Music
- Cool Graphite Scheme For Easier Color Matching
Specifications
- Size: 4×6″ 2-Way Coaxial Speaker
- Power Handling: 300 Watts MAX
- Frequency Response: 100Hz–20kHz
- Sensitivity: 87dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Diameter: 2-7/8″ x 4-3/4″ (73mm x 121mm)
- Mounting Depth: 2″ (50mm)
Other Information
Model: T-46 (B-Stock)
EAN: 0168975910493
Priced and sold by the pairSKU: T46 (B-Stock)