Open Box
Showing all 22 results
-
Car Audio, Open Box
DBXi-15D (Open-Box)
Features
- 15″ cast subwoofer
- power Rating: 750 WRMS / 2000 MAX
- Dual 4-Ohm voice coil
- 3″ Aluminum bobbin
- Super Wide Edge (SWE) Surround
- Patented TCT™ (Turbine Cooled Transducer) Technology
- 150 oz. double stacked magnet
Parameters
- Fs: 12Hz
- Qes: 1.14
- Qms: 5.99
- Qts: .45
- Xmax: 3.5″ (88.9mm)
- Efficiency (1w/1M): 88dB SPL
- Revc: 4.0 Ohm
- Bl: 26.8TM
- Vas: 3.217 ft³ 9(91.1 L)
Please Note: This is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: DBXi 15D B-Stock -
Car Audio, Open Box
Focus F5.25 (Open-Box)
Focus™ speakers are serious products engineered by Earthquake Sound to meet the demands of the toughest musical and environmental situations in the high-fidelity world. Speakers are not about hype or the “One-of-a-Kind” material—they’re all about being able to thoroughly enjoy your music, no matter what type it is.
By applying our extensive testing and development resources, Focus™ speakers have been optimized to reproduce your music with lifelike balance, effortless dynamics, and smooth response in the car. Special attention has been placed on high frequency response and piston area, which might make all the difference when installed in a vehicle.
There are many other products out there, and quite a few more that are overpriced… So, don’t be sold on a name or a power rating…do your homework and listen to the details because no other piece of equipment makes a more significant difference in a sound system than the component and coaxial speakers.
SKU: FOCUS F5.25 (B-Stock) -
Car Audio, Open Box
Focus FC5.2 Component Set (Open-Box)
Features
- Low mass poly injection cone bodies for accuracy and sound quality
- High flow ventilation stamped steel basket design
- Over hung butyl rubber surround for more bass output
- NOMEX/ROMEX spider assemblies for strong durable suspension
- Shallow mount designs for American & foreign cars and trucks
- Multiple Tweeter Mounting Configurations: Flush, surface, and surface angle
- Two-way passive crossover network with high-quality, low-tolerance capacitor
Specifications
- 5.25″ Focus component set with tweeters and passive Crossovers
- Power Handling: 500 Watts MAX
- Frequency Response: 35Hz–22kHz
- Sensitivity: 87dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Depth: 2″
Tweeters
- Silk dome with neodymium motor
- Diameter: 1-1/2″ (38mm)
- Impedance: 4-Ohm
- Frequency Response 1kHz–22kHz
Crossovers
- Crossover Frequency 3200Hz @ 4-Ohm
- Crossover Slope: 24dB/octave High-Pass, 12dB/octave Low-Pass
- Poly Switch Tweeter Protection
In The Box
- x2 5″ (127mm) Focus 5.25 poly cone woofers
- x2 1″ (25mm) Focus TW-25S silk dome tweeters
- x2 Focus crossover networks
- x2 metal woofer grilles with trays
- x2 compact flush-mount fixtures
- x2 compact angle-mount fixtures
- x8 1.5″ (38mm) wood screws
- x8 custom installation mounting clips
- x8 1″ (25mm) sheet metal screws
- x8 factory installation mounting clips
- x2 1″ (25mm) machine screws
- x2 metal spring clips for tweeter fixtures
- x4 speaker wire bundles with pre-attached connectors
SKU: Focus FC5.2 (B-Stock) -
Car Audio, Open Box
Magma-12X (Open-Box)
Specifications
- SWE 12″ Subwoofer
- 1000 Watt Max
- 500 Watt RMS
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor in with the cold air and out with the hot air
- Super thick motor to assist long excursion – 2” thick
- PBP (Perforated Back Plate) that circulate cold air into the gap
SKU: Magma-12X (B-Stock) -
Car Audio, Open Box
Magma-15X (Open-Box)
Specifications
- SWE 15″ Subwoofer
- 1500 Watt Max
- 700 Watt RMS
- 4 Ohm
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor in with the cold air and out with the hot air
- Super thick motor to assist long excursion – 2” thick
- PBP (Perforated Back Plate) that circulate cold air into the gap
SKU: Magma-15X (B-Stock) -
Car Audio, Open Box
MB1 Digital Bass Synthesizer (Open-Box)
Most factory stereos, even high-end systems, protect speakers by reducing subharmonic output when the volume is high. That’s OK in a regular system, but this bottleneck system will handicap low frequency performance if you want to upgrade your factory stereo with amplifiers and subwoofers.
The Earthquake MB1 detects the input level from a factory stereo and adds more bass at high volume levels while keeping your bass response balanced at low volume. Now, you can keep your factory stereo looking flush and its steering wheel controls intact while improving the bass quality and depth.
The MB1 easily wires up to any system and can be mounted in the front or rear of the vehicle. It has two gold-plated inputs and outputs, plus a remote dash control for easy adjustments. The SWEEP and WIDE controls manage frequency ranges for extremely high-precision custom-built bass response.
PLEASE NOTE: This is an open-box item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MB1 (B-Stock) -
Car Audio, Open Box
MiNi D1000 1st Gen (Open-Box)
Features
- Clip Suppression technology
- Bridge-Link feature with two Mini D amplifiers (of same model)
- Fan free operation
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1000 Watts
- RMS Power
- RMS Power 1-Ohm: 600 Watts
- RMS Power 2-Ohm: 360 Watts
- RMS Power 4-Ohm: 180 Watts
- 0 – 12dB (30-80Hz) Bass Boost – available on the D2000 and D2500 models
- Variable Subsonic Filter
- 40-180Hz LPF (Low Pass Filter)
- Gain Control
- Remote Gain Level Control
- Fuse Rating: 40A (included)
Dimensions
- Dimensions (H x W x D): 1-7/8″ (48mm) x 7″ (177mm) x 6-5/16″ (160mm)
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000 1st Gen (B-Stock) -
Car Audio, Open Box
MiNi D1000 2nd Gen (Open-Box)
Features
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Comes complete with remote base knob and cable (over 20ft)
- Power and Protection LED
- Variable Subsonic Filter
- Gain Control
- Remote Gain Level Control
- Clip Suppression Technology
- Bridge-Link
- Fan Free Operation
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1000 Watts
- RMS Power
- RMS Power 1-Ohm: 600 Watts
- RMS Power 2-Ohm: 360 Watts
- RMS Power 4-Ohm: 180 Watts
- 0–12dB (30–80Hz) Bass Boost
- 40–180Hz LPF (Low Pass Filter)
Dimensions
- (H x W x D): 1-15/16″ (49mm) x 6-5/16″ (160mm) x 9-7/8″ (250mm)
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000 2nd Gen (B-Stock) -
Car Audio, Open Box
MiNi D1000.4 1st Gen (Open-Box)
Features
- Clip suppression technology to avoid hard clipping
- Fan free operation with stellar efficiency negates the need for noisy fans
- User selectable high and low pass crossovers with variable crossover frequency
- Boost function, enables up to 12 dB boost of the chosen crossover frequency
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 1000 Watts
- RMS Power:
- 4 x 65W @ 4-Ohm
- 4 x 90W @ 2-Ohm
- 2 x 190W @ 4-Ohm Bridged
- Channel Separation: 80dB
- Crossover Frequencies: 40–400Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 2 x 20A (included)
Dimensions
(H x W x D): 1-7/8″ (48mm) x 7-1/16″ (180.5mm) x 6-5/16″
PLEASE NOTE: This product is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: MiNi D1000.4 1st Gen (B-Stock) -
Car Audio, Open Box
MiNi D1000.4 2nd Gen (Open-Box)
Features
- Clip Suppression technology to avoid hard clipping
- Fan free operation with stellar efficiency negates the need for noisy fans
- User selectable high and low pass crossovers with variable crossover frequency
- Boost function, enables up to 15dB boost of the chosen crossover frequency
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 1000 Watts
- RMS Power:
4 x 85W @ 4-Ohm
4 x 120W @ 2-Ohm
2 x 200W @ 4-Ohm Bridged - Frequency Response: 20–20kHz
- Signal-to-Noise Ratio: >100dB
- Bass Boost: 0–15dB
- THD+N: < 1%
- Fuse Rating: 1 x 60A (included)
Dimensions
- (H x W x D): 1-15/16″ (48.5mm) x 7-15/16″ (202mm) x 6-15/16″ (160mm)
SKU: MiNi D1000.4 2nd Gen (B-Stock) -
Car Audio, Open Box
MiNi D1500.2 1st Gen (Open-Box)
Specifications
- Channels: 2
- Class: Digital Class “D”
- Max Power: 1500 Watts
- RMS Power:
2 x 130W @ 4-Ohm
2 x 180W @ 2-Ohm
1 x 360W @ 4-Ohm Bridged - Channel Separation: 80dB
- Crossover Frequencies: 20 – 500Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 2 x 30A (included)
- Dimensions (H x W x D): 2-1/16″ (52mm) x 8″ (202.5mm) x 8-1/4″ (210mm)
SKU: MiNi D1500.2 1st Gen (B-Stock) -
Car Audio, Open Box
MiNi D2500 (Open-Box)
Specifications
- Channels: 1 (MONO)
- Class: Digital Class “D”
- Max Power: 2000 Watts
- RMS Power:
2000 Watts @ 1-Ohm
1800 Watts @ 2-Ohm
850 Watts @ 4-Ohm - Fuse Rating: 100A (required)
- Dimensions (H x W x D): 1-7/8″ (48mm) x 12-13/16″ (325mm) x 6-5/16″ (160mm)
SKU: MiNi D2500 (B-Stock) -
Car Audio, Open Box
MiNi D3000.4 1st Gen (Open-Box)
Specifications
- Channels: 4
- Class: Digital Class “D”
- Max Power: 3000 Watts
- RMS Power:
4 x 130W @ 4-Ohm
4 x 180W @ 2-Ohm
2 x 360W @ 4-Ohm bridged - Channel Separation: 90dB
- Crossover Frequencies: 20 – 500Hz
- Signal-to-Noise Ratio: >110dB
- Fuse Rating: 3 x 35A (included)
- Dimensions (H x W x D): 2-1/16″ (52mm) x 11-5/8″ (295mm) x 8-5/16″ (212mm)
SKU: MiNi D3000.4 1st Gen (B-Stock) -
Car Audio, Open Box
SWS-10X Shallow Subwoofer (Open-Box)
Features
- 10″ high-performance shallow subwoofer
- Low profile mount for placement anywhere
- Inverted style cone design for a maximum excursion in shallow mount applications
- High-temperature voice coil with heat-sink attachment
- NOMEX/ROMEX spider assembly
- Protected by multiple U.S. patents
- Aluminum bobbin
Specifications
- Power handling: 200 Watts RMS / 400 Watts MAX
- Impedance: 4-Ohm
- Mounting depth: 2.67″ (68mm)
- Cut-out hole diameter: 9″ (228mm)
- Voice Coil Diameter: 2″ (50.8mm)
- Weight: 11 lbs
- Sensitivity: 88.2dB
Parameters
- Revc: 3.500Ohm
- Fs: 34.289Hz
- Sd: 33.000msqM
- BL: 14.197TM
- Qms: 4.038
- Qes: 0.461
- Qts: 0.414
- No: 0.00229%
- SPLo: 85.6dB
- Vas: 954.631mcuFt
- Cms: 174.809uM/N
- Krm: 136.839mOhm
- Erm: 1.215
- Mms: 123.245g
- Mmd: 119.798mKg
- Kxm: 17.238mOhm
- Exm: 0.697
- Xmax: 0.26 in (6.75mm)
- Xmech: 1.10 in (28mm)
- Xmax measured in one direction)
Recommended Sealed Internal Volume
- Minimum: 0.38cu.ft. (10.76Ltr)
- Maximum: 0.75cu.ft. (21.23Ltr)
- Assuming 3/4″ MDF is being used
Other Information
Model: SWS-10X
UPC: 0168975910196
Priced and sold by the piecePlease Note: This is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: SWS-10X (B-Stock) -
Car Audio, Open Box
SWS-12X (Open-Box)
SWS – The OG Shallow Woofer Design
The SWS-12X is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 12-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability.
SKU: SWS-12X (B-Stock) -
Car Audio, Open Box
SWS-8X (Open-Box)
Features
- 8″ high-performance shallow subwoofer
- Low profile mount for placement anywhere
- Inverted style cone design for a maximum excursion in shallow mount applications
- High-temperature voice coil with heat-sink attachment
- NOMEX/ROMEX spider assembly
- Protected by multiple U.S. patents
- Aluminum bobbin
PLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: SWS-8X (B-Stock) -
Car Audio, Open Box
T46 Coaxial Speaker (B-Stock)
Features
- Low Mass Poly Injection Cone Bodies that Deliver Precision Sound Quality
- High Flow Ventilation Stamped Steel Basket Design
- Large Butyl Rubber Surround
- 12dB/Octave crossover
- NOMEX / ROMEX Spider Assemblies For Linear Travel & Durability
- Shallow Mount Designs For American & Foreign Cars And Trucks
- Over 1″ (30mm) Mylar Super Tweeters that Delivers Exceptionally High Frequencies for All Ranges of Music
- Cool Graphite Scheme For Easier Color Matching
Specifications
- Size: 4×6″ 2-Way Coaxial Speaker
- Power Handling: 300 Watts MAX
- Frequency Response: 100Hz–20kHz
- Sensitivity: 87dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Diameter: 2-7/8″ x 4-3/4″ (73mm x 121mm)
- Mounting Depth: 2″ (50mm)
Other Information
Model: T-46 (B-Stock)
EAN: 0168975910493
Priced and sold by the pairSKU: T46 (B-Stock) -
-
Car Audio, Open Box
TNT Series T693X (B-Stock)
Features
- 6″x9″ 3-way Performance Series Component System
- Low Mass Poly Injection Cone Bodies that Delivers Precision Sound Quality
- High Flow Ventilation Stamped Steel Basket Design
- Large Butyl Rubber Surround for accurate bass output
- NOMEX / ROMEX Spider Assemblies For Linear Travel & Durability
- Shallow mount design for more flexible installations
- 1-3/16″ (30mm) Mylar Dome super tweeter with neodymium motor
- 2″ (66mm) Mylar mid-range tweeter
- Speaker grilles included
- Cool Graphite Scheme For Easier Color Matching
Specifications
- 6×9″ 3-Way TNT Series Coaxial
- 600 Watts MAX
- Frequency Response: 20Hz – 22kHz
- Sensitivity: 91dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Depth: 3-7/16″
SKU: T693X (B-Stock)
