Shop
Showing 169–192 of 278 results
-
Car Audio, Home Audio, Passive Radiators, Passive Radiators
PUMP-12 Passive Radiator Module
Features
- Coupled with almost all woofers, increases output up to +6dB without added amplifier power
- Suitable for high output needs where space is limited
- Installs into a sealed enclosure
Specifications
- Piston area: 226 sq.in. (0.1458 m2)
- Cutout Dimensions: 5.5″ (140mm) x 12.75″ (324mm)
Note: When selecting which active driver(s) to use with the PUMP-12, it is important to make sure that the combined piston area of the active driver(s) does not exceed that of the PUMP-12 (226 sq.in.).
Other Information
Model: PUMP-12
UPC: 0689759101215
Priced and sold by the pieceSKU: PUMP-12 -
Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers, Tactile Transducers
Q10B Tactile Transducer
Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers, Tactile TransducersQ10B Tactile Transducer
A Unique Tactile Transducer
The Q10B tactile transducer is an awe-inspiring bass shaker designed to reproduce the effects of the lowest frequencies in music and movies. Q10B is sensitive, articulate, and renders even the most complex low frequency material in every detail. It is so powerful that it can even replace traditional hydraulic platforms in theme parks. The Q10B allows users to control the spread of LFE effects, which is especially useful if your surroundings do not permit high volume audio. When it is installed on a home theater or music chair, its outputs remain in the chair. Mounting it on a platform is also possible, providing power for multiple seats. Q10B is designed for superior music reproduction. It combines precise, quick, and articulated low frequency response with maximum tactile effect. Viewing movies with a Q10B adds a new dimension that you will not want to be without. Its patented motor system is built around ultra high-gauss neodymium magnets and a military-grade flat wire voice coil that can produce 2 inches of earthquake-inducing stroke and response as low as 5Hz.
SKU: Q10B -
Home Audio, In-Wall & In-Ceiling Speakers
R650 (Pair)
Features
- Edgeless design for seamless blend
- Polypropylene cone woofer
- Swiveling silk dome Neodymium tweeter
- Bumped back basket for higher speaker excursion
- Wider surround for deeper bass
- 12dB/Octave filter network crossover
- Thermal tweeter protection
- Custom compact spring loaded terminals
- Easy to use Turn ‘N’ Lock installation mechanism
- Paintable rust-resistant grille
- Rough-in ready with the RK-C6
- Round and square grilles available
- Available in 6.5″ dual VC, 8″, and 8″ dual VC models
Specifications
- Woofer Size: 6.5″ (165mm)
- Tweeter: 1″ (25mm)
- Power Handling: 160 watts MAX
- Frequency Response: 45Hz–20kHz
- Sensitivity: 92dB @1W/1M
- Nominal Impedance: 8 Ohm
- Crossover: 12dB/Octave filter network
- Voice Coil: Single
- Grille Finish: White/Paintable
Dimensions
- Frame Diameter: 8.79″ (223.5mm)
- Grille Diameter: 9″ (228mm)
- Cut-out Hole Diameter: 7.87″ (200mm)
- Mounting Depth: 4″ (101mm)
- Magnet Diameter: 3.18″ (81mm)
- Weight: 2.5 lbs (1.14 kgs)
Other Information
Model: R650
UPC: 0068975901333
Priced and sold by the pairSKU: R650 Pair -
Home Audio, In-Wall & In-Ceiling Speakers
R6D
Features
- Edgeless design for seamless blend
- Polypropylene cone woofer
- Dual swiveling silk dome neodymium tweeters
- Bumped back basket for high speaker excursion
- Wider surround for deeper bass and higher speaker excursion
- 12dB/Octave filter network crossover
- Thermal tweeter protection
- Custom compact spring loaded terminals
- Easy to use Turn ‘N’ Lock installation mechanism
- Paintable rust-resistant grille
- Rough-in ready with the RK-C6
- Round and square grilles available
- Available in 6.5″, 8″, and 8″ dual VC models
Specifications
- Woofer Size: 6.5″ (165mm)
- Tweeter: Dual 1″ (25mm)
- Power Handling: 160 watts MAX
- Frequency Response: 45Hz–20kHz
- Sensitivity: 93dB @1W/1M
- Nominal Impedance: 8 Ohm
- Crossover: 12dB/octave filter network
- Voice Coil: Dual
- Grille Finish: White/Paintable
Dimensions
- Frame Diameter: 8.79″ (223.5mm)
- Grille Diameter: 9″ (228mm)
- Cut-out Hole Diameter: 7.87″ (200mm)
- Mounting Depth: 4″ (101mm)
- Magnet Diameter: 3.18″ (81mm)
- Weight: 2.5 lbs (1.14 kgs)
Other Information
Model: R6D
UPC: 0068975901340
Priced and sold by the pieceSKU: R6D -
Home Audio, In-Wall & In-Ceiling Speakers
R800 (Pair)
Features
- Edgeless design for seamless blend
- Polypropylene cone woofer
- Swiveling silk dome neodymium tweeter
- Bumped back basket for high speaker excursion
- Wider surround for deeper bass and higher speaker excursion
- 12dB/Octave filter network crossover
- Thermal tweeter protection
- Custom compact spring loaded terminals
- Easy to use Turn ‘N’ Lock installation mechanism
- Paintable rust-resistant grille
- Rough-in ready with the RK-C8
- Round and square grilles available
- Available in 6.5″, 6.5″ dual VC, and 8″ dual VC models
Specifications
- Woofer Size: 8″ (203mm)
- Tweeter: 1″ (25mm)
- Power Handling: 200 watts MAX
- Frequency Response: 45Hz–20kHz
- Sensitivity: 92dB @1W/1M
- Nominal Impedance: 8 Ohm
- Crossover: 12dB/octave filter network
- Voice Coil: Single
- Grille Finish: White/Paintable
Dimensions
- Frame Diameter: 10.5″ (267mm)
- Grille Diameter: 10.62″ (270mm)
- Cut-out Hole Diameter: 9.5″ (240mm)
- Mounting Depth: 4.56″ (116mm)
- Magnet Diameter: 3.38″ (86mm)
- Weight: 3 lbs (1.36 kgs)
Other Information
Model: R800
UPC: 0068975901357
Priced and sold by the pairSKU: R800 Pair -
Home Audio, In-Wall & In-Ceiling Speakers
R8D
Features
- Edgeless design for seamless blend
- Polypropylene cone woofer
- Swiveling silk dome neodymium tweeter
- Bumped back basket for high speaker excursion
- Wider surround for deeper bass and higher speaker excursion
- 12dB/Octave filter network crossover
- Thermal tweeter protection
- Custom compact spring loaded terminals
- Easy to use Turn ‘N’ Lock installation mechanism
- Paintable rust-resistant grille
- Rough-in ready with the RK-C8
- Round and square grilles available
- Available in 6.5″, 6.5″ dual VC, and 8″ models
Specifications
- Woofer Size: 8″ (203mm)
- Tweeter: 1″ (25mm)
- Power Handling: 200 watts MAX
- Frequency Response: 45Hz–20kHz
- Sensitivity: 92dB @1W/1M
- Nominal Impedance: 8 Ohm
- Crossover: 12dB/octave filter network
- Voice Coil: Dual
- Grille Finish: White/Paintable
Dimensions
- Frame Diameter: 10.5″ (267mm)
- Grille Diameter: 10.62″ (270mm)
- Cut-out Hole Diameter: 9.5″ (240mm)
- Mounting Depth: 4.56″ (116mm)
- Magnet Diameter: 3.38″ (86mm)
- Weight: 3.20 lbs (1.45 kgs)
Other Information
Model: R800
UPC: 0068975901357
Priced and sold by the pieceSKU: R8D -
Car Audio, Enclosures
RB1 Vented Enclosure
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Vented port for extended low frequency response and maximum output.
- Black spray-on polyurethane bed liner material is applied to all enclosures for durability and chipping resistance.
- Available with a single 10 and 12 inch driver.
- TNT – TNT-10S, TNT-10DVC, TNT-12DVC
- TremorX – TremorX-104, TremorX-12D4
- Rectangular shaped enclosure design.
- Pre-installed gold plated wire terminals included.
Dimensions
Model: RB1-10 VENTED
- External H x W x D: 12.00ʺ (304.80mm) x 15.50ʺ (393.70mm) x 13.50ʺ (349.90mm)
- Cutout Diameter: Ø 9.00″ (228.60mm)
- Port Inlet H x W: 10.50ʺ (266.70mm) x 2.50ʺ (63.50mm)
Model: RB1-12 VENTED
- External H x W x D: 14.00ʺ (355.60mm) x 16.38ʺ (415.93mm) x 14.50ʺ (368.30mm)
- Cutout Diameter: Ø 11.00″ (279.40mm)
- Port Inlet H x W: 12.50ʺ (317.50mm) x 2.50ʺ (63.50mm)
SKU: n/a -
Car Audio, Enclosures
RB1-DBXI-12PP
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Pump-12 passive radiator for extended low frequency response and maximum output.
- For durability and chipping resistance, black spray-on polyurethane material is applied to all enclosures.
- DBXI – DBXI-12D
- Rectangular-shaped enclosure design.
- Pre-installed gold plated wire terminals included.
Dimensions
Model: RB1-DBXI-12PP
- External H x W x D: 16.31ʺ (414.24mm) x 22.17ʺ (563.02mm) x 17.00ʺ (431.80mm)
- Cutout Diameter: 11.44ʺ (290.50mm)
- Port Inlet H x W: 12.75ʺ (323.85mm) x 5.50ʺ (139.70mm)
SKU: RB1-DBXI-12PP -
Car Audio, Enclosures
RB1-DBXI-15PP
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Pump-12 passive radiator for extended low frequency response and maximum output.
- For durability and chipping resistance, black spray-on polyurethane material is applied to all enclosures.
- Available with 15-inch loaded driver.
- DBXI – DBXI-15D
- Rectangular-shaped enclosure design.
- Pre-installed gold-plated wire terminals are included.
Dimensions
Model: RB1-DBXI-15PP
- External H x W x D: 19.00ʺ (482.56mm) x 24.92ʺ (633.02mm) x 17.00ʺ (431.80mm)
- Cutout Diameter: 14.17ʺ (360.00mm)
- Port Inlet H x W: 12.75ʺ (323.85mm) x 5.50ʺ (139.70mm)
SKU: RB1-DBXI-15PP -
Car Audio, Enclosures
RB1-MAGMA-12PP
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Pump-12 passive radiator for extended low frequency response and maximum output.
- For durability and chipping resistance, black spray-on polyurethane material is applied to all enclosures.
- Available with 12-inch loaded driver.
- MAGMA – MAGMA-12X
- Rectangular-shaped enclosure design.
- Pre-installed gold-plated wire terminals are included.
Dimensions
Model: RB1-MAGMA-12PP
- External H x W x D: 16.31ʺ (414.24mm) x 22.17ʺ (563.02mm) x 17.00ʺ (431.80mm)
- Cutout Diameter: 11.44ʺ (290.50mm)
- Port Inlet H x W: 12.75ʺ (323.85mm) x 5.50ʺ (139.70mm)
SKU: RB1-MAGMA-12PP -
Car Audio, Enclosures
RB1-MAGMA-15PP
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Pump-12 passive radiator for extended low frequency response and maximum output.
- For durability and chipping resistance, black spray-on polyurethane material is applied to all enclosures.
- Available with 15-inch loaded driver.
- MAGMA – MAGMA-15X
- Rectangular-shaped enclosure design.
- Pre-installed gold-plated wire terminals included.
Dimensions
Model: RB1-MAGMA-15PP
- External H x W x D: 19.00ʺ (482.56mm) x 24.92ʺ (633.02mm) x 17.00ʺ (431.80mm)
- Cutout Diameter: 14.17ʺ (360.00mm)
- Port Inlet H x W: 12.75ʺ (323.85mm) x 5.50ʺ (139.70mm)
SKU: RB1-MAGMA-15PP -
Bundles, Car Audio, Enclosures
RB1-TX10-BB
RB1-TX10 Vented Enclosure
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with in-house CNC machining to ensure quality and control.
- Vented port for extended low frequency response and maximum output.
- Black spray-on polyurethane bed liner material is applied to all enclosures for durability and chipping resistance.
- Rectangular-shaped enclosure design.
- Pre-installed gold-plated wire terminals are included.
TremorX-104 Features
- Heavy-duty stitched leads
- Spring loaded terminals
- Anti-wobble cone construction
- TCT Technology (Turbine Cooled Transducer) for high-efficiency output
- XLT chassis geometry allows for extra length between the spider and the magnetic gap
- Wide edge suspension for significant excursion without deformation or increased mechanical resistance
- Military-grade single voice coil
Specifications
- 10 in. Subwoofer
- Power Handling:
- 300W RMS, 1000W Max
- Impedance: 4-Ohm
- Efficiency (lW/lM): 86.4345 dB
- One-way linear excursion: 1 in. / 25.4 mm
Dimensions
- HxWxD: 12.00 in. (304.80 mm) x 15.50 in. (393.70 mm) x 13.50 in. (349.90 mm)
- Cutout Diameter: Ø 9.00 in. (228.60 mm)
- Port Inlet H x W: 10.50 in. (266.70 mm) x 2.50 in. (63.50 mm)
Parameters
- Free Air Resonance (Fo): 30.9749 Hz
- Electrical “Q” (Qes): 0.372
- Mechanical “Q” (Qms): 5.1194
- Total Speaker “Q” (Qts): 0.3468
- Effective Piston Area (Sd): 0.0289 m2
- Revc=Ohm: 3.5
- Mmd=g: 101.3326
- Mms=g: 104.156
- Cms=uM/N: 177.886
- Vas=ft3: 0.7493971 ft3
- BL=T·M: 15.0886
- No=%: 0.2764564
MiNi D1000 2nd Gen Features
- Clip suppression technology to avoid hard clipping so the sound will not get harsh in the event of excessive input.
- Bridge In/Out feature allows two MiNi D amplifiers (of the same model) to be linked together for triple the output of a single unit.
- Fan-free operation with stellar efficiency negates the need for noisy fans even when driven continuously 2db into clip.
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Power and Protection LED
- Variable Subsonic Filter
- Gain Level Control
- Remote Gain Level Control
- Remote base knob and cable (over 20ft) included.
Specifications
- Channels: 1 (MONO)
- Class: Digital Class D
- Max Power: 1200W
- RMS Power:
- 600 Watts @ 1-Ohm
- 360 Watts @ 2-Ohm
- 180 Watts @ 4-Ohm
- Gain Level Control: 0.2V–5V RMS
- Low Pass Filter: 40Hz–180Hz
- Subsonic Filter: OFF–50Hz
- Frequency Adjustment: 30Hz–80Hz
- Bass Boost: 0–12dB
Dimensions
- Dimensions (H x W x D): 1.92 in. (49 mm) x 6.29 in. (160 mm) x 9.84 in. (250 mm)
AK-5000
- Red Power: Wire 17 ft (5.18m) 8-Gauge
- Black Ground Wire: 3 ft (0.9m) 8-Gauge
- Speaker Wire: 20 ft (6.1m) 16-Gauge
- Blue Remote Turn ON Wire: 16 ft (4.8m) 16-Gauge
- Silver Twisted-Pair RCA Interconnect: 18 ft (5.5m) Straight
- Black Split Loom: 6 ft (1.83m) OD 8mm
- Gold Plated ANL Fuse Holder: ANL Fuse 150 A
- 4 x 4-Gauge Ring Terminals: 3 red/1 black
- 2 x 4-Gauge Spade Terminals: 1 red/1 black
- 5 x 16-Gauge Fork Terminals: 3 red/2 black
- 4 x 16-Gauge Female Disconnects: 2 red/2 black
- 1 x 16-22-Gauge Butt Connector for Remote Turn-ON Wire: 1 red
- 1 x Self-Tapping Screw: 1 tinned
- 10 x Black Cable Ties, 120mm long
- 1 x Grommets in Black
Other Information
Model: RB1-TX10-BB
EAN: 0689759101611
Priced and sold by the setSKU: RB1-TX10-BB -
Car Audio, Enclosures
RB2 Ported Enclosure
Earthquake Sound introduces its new line of single and dual mobile audio subwoofer enclosures. Crafted from 3/4ʺ particle board, these enclosures are CNC machined to precision and assembled in-house for the utmost quality and performance. They are made to accommodate most 10 and 12-inch Earthquake subwoofers and others on the market today. The exterior of this all-new line of enclosures is finished with a black spray-on polyurethane textured bedliner material, giving them a rugged yet extremely durable look. RB2 subwoofer enclosures are available as preinstalled loaded units with either TNT or TremorX drivers with wiring terminals included.
SKU: n/a -
Augmented/Virtual Reality, Bookshelf Speakers, DJ / Pro Audio, Home Audio, Studio Monitors
RBS-52
The Earthquake Reference Bookshelf Speaker RBS-52 is a compact passive monitor speaker with exceptional audio quality. It has a neutral and elegant appearance, making it ideal for any setting. With a focus on the core audio qualities, the RBS-52 is free from costly gimmicks and bejeweled surfaces. Its rational design and audio-obsessed internals come together to make the RBS-52 superb value for money and attainable on almost any budget. The Earthquake aficionado will recognize the iQuake genetics as both tweeter and woofer are almost identical to those in our long-running iQuake series, one of the most lauded compact speakers on the market. The RBS-52 is perfect for home theater, studios, or anywhere a small, unassuming, high-quality speaker is needed.
SKU: RBS-52 -
Home Audio, In-Wall & In-Ceiling Speakers
RCS-500 (Pair)
Specifications
- 1-inch silk dome swivel NEO tweeter
- Bumped back basket for high speaker excursion
- Wider surround for deeper bass and higher speaker excursion
- 12 dB/Octave filter network crossover
- Thermal tweeter protection
- Custom compact spring loaded terminals
- Easy to use Turn ‘N’ Lock installation mechanism
- 20% trimmer speaker frame for to reduce visibility
- Paintable rust-resistant grille
- Also available in 6.5″ and 8″ models
- Overall diameter: 7-1/2″ (191mm)
- Cut out diameter: 6-1/2″ (165mm)
- Mounting depth: 3″ (77mm)
SKU: RCS-500 -
Accessories, Home Audio, In-Wall & In-Ceiling Speakers
RK-C6 v2 Rough-In Kit
Specifications
- Compatible with 6.5-inch in-wall/in-ceiling speakers
- Expedites home audio installation
- Easy for drywall installers to spot and cut around
- Anti-rust aluminum mounting wings for installation flexibility
- Thin perforated anti-rust aluminum wings can be trimmed to a desired length
- 360° wing positioning for versatility
- Compatible with Earthquake Turn-N-Lock™ installation mechanisms
- Meets and exceeds all building codes
- Kit comes with two mounting ring brackets and four mounting wings
- Check speaker mounting specifications prior to installation if not using Earthquake speakers
Dimensions
- Overall Ring Diameter: 9.84 in. (250mm)
- Inner Ring Diameter: 8.26 in. (210mm)
- Cutout Hole Diameter: 8.58 in. (218mm)
- Assembled Length: 30.5 in. (774mm)
Other Information
Model: RK-C6 v2
EAN: 0689759002437
Priced and sold by the pairSKU: RK-C6 v2 -
Accessories, Home Audio, In-Wall & In-Ceiling Speakers
RK-C8 v2 Rough-In Kit
Specifications
- Compatible with 8-inch in-wall/in-ceiling speakers
- Expedites home audio installation
- Easy for drywall installers to spot and cut around
- Anti-rust aluminum mounting wings for installation flexibility
- Thin perforated anti-rust aluminum wings can be trimmed to a desired length
- 360° wing positioning for versatility
- Compatible with Earthquake Turn-N-Lock™ installation mechanisms
- Meets and exceeds all building codes
- Kit comes with two mounting ring brackets and four mounting wings
- Check speaker mounting specifications prior to installation if not using Earthquake speakers
Dimensions
- Overall Ring Diameter: 11.33 in. (288mm)
- Inner Ring Diameter: 9.56 in. (243mm)
- Cutout Hole Diameter: 10.07 in. (256mm)
- Assembled Length: 32 in. (813mm)
Other Information
Model: RK-C8 v2
EAN: 0689759002529
Priced and sold by the pairSKU: RK-C8 v2 -
Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile Transducers
Shell ShoXX Gaming Transducer
Gaming AR/VR Audio, Home Audio, Tactile Transducers, Tactile TransducersShell ShoXX Gaming Transducer
Features
- Tactile performance all the way down to 15Hz
- Enhanced low frequency extension for home theater 5.1 and 2-channel systems
- Interprets low frequency by-product of in-game events and converts them to the corresponding kinetic output (vibrations)
- Patented designs exclusive to Earthquake
- Flat wire aluminum voice coil
- Thermal protection
- Rugged cast aluminum heat sink
Amplifier Specifications
- Amplification Class: Class J
- Power Output:
- 320 WRMS @ 4 Ohm
- 160 WRMS @ 8 Ohm
- Frequency Response 28Hz–175Hz
- Input Impedance: 10 kOhm
- Input Sensitivity for Full Output:
- Max: 0.2V
- Min: 1.7V
Transducer Specifications
- Frequency Response 15Hz-50Hz
- Impedance 8 Ohm
- Power Handling: 20–500W
- Pipe Size 1.1″–1.5″ (28mm–38mm)
Other Information
Model: Shell Shoxx
UPC: 0068975900305
Priced and sold by the pieceSKU: Shell Shoxx -
Gaming AR/VR Audio, Home Audio, Open Box, Open Box
Shell ShoXX Tactile Transducer (Open-Box)
Specifications
- Tactile performance all the way down to 15Hz
- Enhanced low frequency extension for home theater 5.1 and 2-channel systems
- Patented designs exclusive to Earthquake
- Flat wire aluminum voice coil
- Thermal protection
- Rugged cast aluminum heat sink
SKU: Shell Shoxx (B-Stock) -
Car Audio, Home Audio, Passive Radiators, Passive Radiators
SLAPS-12 Passive Radiator
Features
- Coupled with almost all woofers, SLAPS increases output without added amplifier power or enclosure volume.
- Suitable for high output needs where space is limited.
- User-tunable adjustments can be set to match a range of vehicle requirements and musical preferences.
- Available with or without loaded mass.
- Installs just like a subwoofer.
- Slim-mount design is only 3-inches deep.
- No increase over existing sealed subwoofer enclosure sizes.
- No annoying port noise.
- Easy tuning for quick adjustments.
Specifications
- Flat pistonic membrane
- SWE (Super Wide Edge) edge suspension with height: 44 mm
- Required free space on each side of the device: 90 mm
- Cutout Diameter: 12.20” (310mm)
- Overall Diameter: 13.38” (340mm)
- Mounting Depth: 1.73″ (44mm)
- Countersink Depth: 0.23″ (6 mm)
- Weight: 3.28 lbs (1.48 kgs)
Parameters
- Fs: 17Hz
- Cms: 0.1998 N/mm
- Mms: 400 g
- Qmd: 7
- Sd: 0.04196
Other Information
Model: SLAPS-12
EAN: 1121268975912
Priced and sold by the pieceSKU: SLAPS-12-1 -
Car Audio, Home Audio, Passive Radiators, Passive Radiators
SLAPS-15v2 Passive Radiator
Features
- Installs just like a subwoofer
- Slim-mount design is only 3-inches deep
- No increase over existing sealed subwoofer enclosure sizes
- Increases output without added amplifier power or enclosure volume
- Suitable for high output needs where space is limited
- Compatible replacement for damaged Sunfire passive radiator
- Adds up to +6dB of bass compared to regular sealed and ported enclosures
- No annoying port noise
Notes:
- This version does not feature an adjustable mass for tuning.
- It is designed for a 2 cubic feet (56 Liter box) and at a tuning frequency of 19 to 20Hz.
- Keep at least 2 inches (5cm) of free air behind the SLAPS-15v2 for it to be able to move freely.
- The SLAPS-15v2 passive radiator is also used in our home audio subwoofers such as the MiniMe DSP P-15.
Specifications
- Cutout Diameter: 15.27” (388mm)
- Overall Diameter: 16.61” (422mm)
- Mounting Depth: 3.25″ (85.5mm)
- Weight: 6.08 lbs (2.73 kgs)
TS Parameters
- Mmd: 983 g
- Fs: 13Hz
- Vas: 5.228 cu. ft.
- Qmp (Qms): 9.5
- Cms: 0.0001820 m/N
- Mms: 995 g
- Qtp (Qts): 0.38
- Sd: 760 cm3
- Xmax: 4.5″
Other Information
Model: SLAPS-15v2
EAN: 0689759002062
Priced and sold by the pieceSKU: SLAPS-15v2 -
Car Audio, Home Audio, Passive Radiators, Passive Radiators
SLAPS-M10v2 Passive Radiator
Features
- Coupled with almost all woofers, SLAPS increases output without added amplifier power or enclosure volume.
- Suitable for high output needs where space is limited.
- User-tunable adjustments can be set to match a range of vehicle requirements and musical preferences.
- Installs just like a subwoofer.
- Slim-mount design is only 3-inches deep.
- No increase over existing sealed subwoofer enclosure sizes.
- Easy tuning for quick adjustments.
- Compatible replacement for damaged Sunfire passive radiator.
Dimensions & Specifications
- Cutout Diameter: 9 15/16″ (236mm)
- Overall Diameter: 10 15/16″ (261mm)
- Mounting Depth: 2″ (49.9mm)
- Xmax: 4″
- Weight: 2.08 lbs
- Hex Nut Size: US 5/16 (M8)
- Mass ID: 8mm
- Max Mass OD: 74 mm
TS Parameters
All Measurements Are With Zero Added Mass
Assuming Surround Losses of Qmd = 7 @ 20Hz- CMS, CMP: 0.00035407 N⋅m
- Diameter Peak to Peak, D: 20.25 cm
- Active Piston Area Sd: 322.0630875 cm²
- Active Piston Area Sd: 0.032206309 m²
- Vas in Liters: 52.15063204 L
- Vas in Cubic Feet: 1.83628986 ft3
- Air Mass Mmr In Kgs: 0.003323374 kgs
- Air Mass Mmr In Grams: 3.32337442 g
- Moving Mass In Grams: 152 g
- Mms = Mmp In Grams: 155.3233744 g
- Free Air Resonance Fs = Fp: 21.4613009 Hz
- Qms: 9.5
Other Information
Model: SLAPS-M10v2
EAN: 0689759101635
Priced and sold by the pieceSKU: SLAPS-M10v2
