Shop
Showing 73–96 of 269 results
-
Car Audio, Open Box
Focus F5.25 (Open-Box)
Focus™ speakers are serious products engineered by Earthquake Sound to meet the demands of the toughest musical and environmental situations in the high-fidelity world. Speakers are not about hype or the “One-of-a-Kind” material—they’re all about being able to thoroughly enjoy your music, no matter what type it is.
By applying our extensive testing and development resources, Focus™ speakers have been optimized to reproduce your music with lifelike balance, effortless dynamics, and smooth response in the car. Special attention has been placed on high frequency response and piston area, which might make all the difference when installed in a vehicle.
There are many other products out there, and quite a few more that are overpriced… So, don’t be sold on a name or a power rating…do your homework and listen to the details because no other piece of equipment makes a more significant difference in a sound system than the component and coaxial speakers.
SKU: FOCUS F5.25 (B-Stock) -
Car Audio, Coaxial Speakers
Focus F6x9 Coaxial Speaker
Features
- 3-way high performance coaxial speaker
- Low mass poly injection cone bodies for accuracy and sound quality
- High flow ventilation stamped steel basket design
- Overhung Butyl Rubber Surround for increased musical output and accuracy
- NOMEX/ROMEX spider assemblies for strong, durable, and more linear suspension
- Shallow mount designs for American and foreign cars and trucks
- Variable mount FS6.5; 6-1/2″ component speaker for installation in almost any vehicle
- Swiveling 20mm silk dome neodymium tweeters
- Mellow color scheme for easier color matching
Specifications
- Midbass: 6×9″ poly cone woofer with 1″ voice coil
- Tweeter: 1″ silk dome with neodymium magnet
- Midrange: 2″ super dome
- 600 Watts MAX
- Frequency Response: 20Hz–22kHz
- Sensitivity: 90dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Depth: 3.38″ (86mm)
SKU: FOCUS F6x9 -
Car Audio, Open Box
Focus FC5.2 Component Set (Open-Box)
Features
- Low mass poly injection cone bodies for accuracy and sound quality
- High flow ventilation stamped steel basket design
- Over hung butyl rubber surround for more bass output
- NOMEX/ROMEX spider assemblies for strong durable suspension
- Shallow mount designs for American & foreign cars and trucks
- Multiple Tweeter Mounting Configurations: Flush, surface, and surface angle
- Two-way passive crossover network with high-quality, low-tolerance capacitor
Specifications
- 5.25″ Focus component set with tweeters and passive Crossovers
- Power Handling: 500 Watts MAX
- Frequency Response: 35Hz–22kHz
- Sensitivity: 87dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Depth: 2″
Tweeters
- Silk dome with neodymium motor
- Diameter: 1-1/2″ (38mm)
- Impedance: 4-Ohm
- Frequency Response 1kHz–22kHz
Crossovers
- Crossover Frequency 3200Hz @ 4-Ohm
- Crossover Slope: 24dB/octave High-Pass, 12dB/octave Low-Pass
- Poly Switch Tweeter Protection
In The Box
- x2 5″ (127mm) Focus 5.25 poly cone woofers
- x2 1″ (25mm) Focus TW-25S silk dome tweeters
- x2 Focus crossover networks
- x2 metal woofer grilles with trays
- x2 compact flush-mount fixtures
- x2 compact angle-mount fixtures
- x8 1.5″ (38mm) wood screws
- x8 custom installation mounting clips
- x8 1″ (25mm) sheet metal screws
- x8 factory installation mounting clips
- x2 1″ (25mm) machine screws
- x2 metal spring clips for tweeter fixtures
- x4 speaker wire bundles with pre-attached connectors
SKU: Focus FC5.2 (B-Stock) -
Car Audio, Component Speaker Sets
Focus FC6.2 Component Set
Features
- Low mass poly injection cone bodies for accuracy & sound quality
- Silk dome tweeter with neodymium motor
- Two-way passive crossover network with high-quality, low-tolerance capacitors
- High flow ventilation stamped steel basket design
- Over hung butyl rubber surround for higher bass output
- NOMEX / ROMEX spider assemblies for strong durable suspension
- Shallow mount designs for American & foreign cars and trucks
- Flush, surface, and surface angle tweeter mounting options
Midbass Specifications
- Power Handling: 600 Watts MAX
- Frequency Response: 30Hz–22kHz (±3dB)
- Sensitivity: 87dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Diameter: 4.92″ (125mm)
- Mounting Depth: 1.77″ (45mm)
Tweeter Specifications
- Diameter: 1.5″ (38mm)
- Impedance: 4-Ohm
- Frequency Response 1kHz–22kHz
Crossovers
- Crossover Frequency: 3200Hz @ 4-Ohm
- Crossover Slope: 24dB/octave high-pass, 12dB/octave low-pass
- Poly switch tweeter protection
In The Box
- (2) Focus-C6.5, 6.5″ (165.1mm) poly cone midbass drivers
- (2)Focus-TW-25S, 1″ (25mm) silk dome tweeters
- (2) Focus crossover networks
- (2) metal woofer grilles with trays
- (2) compact flush-mount fixtures
- (2) compact angle-mount fixtures
- (8) 8 x 1.5″ (38.1mm) wood screws
- (8) custom installation mounting clips
- (8) 8 x 1″ (25mm) sheet metal screws
- (8) factory installation mounting clips
- (2)1″ (25mm) machine screws
- (2) metal spring clips for tweeter fixtures
- (4) speaker wire bundles with pre-attached connectors
Other Information
Model: FC6.2
EAN: 0168975910110
Priced and sold by the setSKU: Focus FC6.2 -
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
GLI-200
Accessories, Accessories, Accessories, Accessories, Car Audio, DJ / Pro Audio, Gaming AR/VR Audio, Home AudioGLI-200
Specifications
- Eliminates Hum or Ground Loop Noise
- Home, Mobile, and Pro Audio Compatible
- RCA Inputs and Outputs
- 600Ω Impedance Industry Standard
- Compact Rugged Construction
Dimensions
- Height: 2.85″ (72.49mm)
- Width: 3.32″ (84.45mm)
- Depth: 1.35″ (34.33mm)
Other Information
Model: GLI-200
EAN: 0689759001911
Priced and sold by the pieceSKU: GLI-200 -
Home Audio, Outdoor/Indoor Speakers
Granite-10 Outdoor Subwoofer
A Subwoofer Built For The Outdoors
The Granite-10 outdoor subwoofer, is the latest addition to Earthquake’s ROCK-ON speaker series. It was specifically designed to imitate a rock-like appearance that can easily blend in with any outdoor environment. The enclosure of the Granite-10 is made from an extremely durable epoxy resin construction and other UV-treated materials, making this subwoofer an ideal choice for the most demanding outdoor elements. The ROCK-ON Granite-10 subwoofer produces a pure sound that blends in with nature.
The Granite-10 brings true bass to your outdoor space, which is greatly needed in today’s rock speaker market. The Granite-10 is fitted with an “S” shaped port that also helps in preventing water & moisture from getting trapped inside the structure. The Earthquake ROCK-ON Granite-10 subwoofer is great for adding bass to any new or pre-existing outdoor audio system. The enclosure can also be custom painted so that it may match or compliment your garden, pool area, front yard, back yard, etc. With Earthquake’s Granite-10, you can turn any outdoor space into an entertainment center.
For a complete 2.1 outdoor audio system, Earthquake recommends the Granite-52 outdoor speaker and XJ-300ST amplifier.
SKU: GRANITE-10 -
Home Audio, Open Box
Granite-10 Outdoor Subwoofer (Open-Box)
Features
- UV treated and weather-resistant enclosure materials
- Durable 15mm epoxy resin construction
- Rock-like appearance and finish to easily blend in with any outdoor environment
- “S” shaped port prevents water/moisture from entering and adds 3dB
- High power crossover
- Paintable rock-like appearance and finish blends in with any outdoor environment
Specifications
- Woofer size: 10″
- Frequency Response: 30Hz–180Hz
- Power Handling: 20-400 Watts
- Sensitivity: 92dB
- Impedance: 4-Ohm
- Voice Coil Diameter: Single 2.5″ (63.5 mm)
- 1.5″ winding height
- Surround Material: Butyl Rubber
- Cone material: Polypropylene
- Enclosure Material: Epoxy Resin
Dimensions
- Height: 14″ (356 mm)
- Width: 18.5″ (570 mm)
- Depth: 21″ (534 mm)
SKU: GRANITE-10-B-Stock -
Home Audio, Open Box
Granite-10D Outdoor Subwoofer (Open-Box)
The Granite-10D Outdoor Subwoofer is part of Earthquake’s ROCK-ON speaker series. It was designed to imitate a rock-like appearance that can easily blend in with any outdoor environment. The enclosure of the Granite-10D is made from an extremely durable epoxy resin construction and other UV-treated materials, making this subwoofer an ideal choice for the most demanding outdoor elements. The ROCK-ON Granite-10 Subwoofer features a high-power crossover that reduces distortions and produces a pure sound that blends with nature.
The ROCK-ON Granite-10D brings accurate bass to your outdoor space, which is greatly needed in today’s rock speaker market. The Granite-10D is ported with an “S” shape that also helps prevent water & moisture from getting trapped inside the structure. The Earthquake ROCK-ON Granite-10D Outdoor Subwoofer is great for adding bass to any new or pre-existing outdoor audio system. The enclosure can also be painted to match or compliment your garden, pool area, front yard, back yard, etc. With the Earthquake Granite-10D, you will turn any outdoor space into an entertainment center.
SKU: GRANITE-10D-B-Stock -
Home Audio, Outdoor/Indoor Speakers
Granite-52 Outdoor Speaker
ROCK-ON Series 5.25″ Outdoor Speaker – Pair
The Earthquake Sound Granite-52 outdoor speakers and Granite-10 subwoofer – part of the ROCK-ON outdoor speaker series, are specifically designed to imitate a rock appearance and easily blend in with any outdoor environment. Made with UV-treated, weather-resistant enclosure materials and durable epoxy resin construction, the ROCK-ON series Granite-52 speakers can withstand the demanding outdoor elements. The Granite-52 is a pair of rock speakers with a 5.25-inch woofer and a 0.5-inch tweeter. They serve as your left and right channels, have an amazing frequency response that is unmatched by any other rock speaker, and produce high-quality and accurate sound. The ROCK-ON Granite-10 subwoofer features a high-power crossover that reduces distortion and delivers pure sound. Also, Granite-10’s port is “S” shaped, so water cannot get trapped inside. The Granite-10 brings bass to your outdoor space, something that is greatly needed in today’s rock speaker market. Combined with the Granite-52 speakers, which have a matching finish, you can turn any backyard into an entertainment center.
SKU: GRANITE-52 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-1.5 High Speed HDMI Cable
Specifications
- 1.5ft (0.45m)
- Gold Plated Connectors
- Triple Shielded
- 4K X 2K Resolution Support
- HDMI Ethernet Cable (Eliminates the need of additional Ethernet cables to connect other internet-enabled HDMI devices in the network)
Audio Return Channel (enables two-way audio transmission between the A/V receiver and HDTV, eliminating the need of a separate audio cable) - Full 3D Support (defines common 3D formats and resolutions for HDMI-enabled devices, enabling 3D gaming and other 3D video applications)
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Sold by the piece
SKU: HD-1.5 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-12 High Speed HDMI Cable
Specifications
- 12ft (3.6m)
- Gold Plated Connectors
- Triple Shielded
- 4K X 2K Resolution Support
- HDMI Ethernet Cable (Eliminates the need of additional Ethernet cables to connect other internet-enabled HDMI devices in the network)
Audio Return Channel (enables two-way audio transmission between the A/V receiver and HDTV, eliminating the need of a separate audio cable) - Full 3D Support (defines common 3D formats and resolutions for HDMI-enabled devices, enabling 3D gaming and other 3D video applications)
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Sold by the piece
SKU: HD-12 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-20 High Speed HDMI Cable
Specifications
- 20ft (6.1m)
- Gold Plated Connectors
- Triple Shielded
- 4K X 2K Resolution Support
- HDMI Ethernet Cable (Eliminates the need of additional Ethernet cables to connect other internet-enabled HDMI devices in the network)
Audio Return Channel (enables two-way audio transmission between the A/V receiver and HDTV, eliminating the need of a separate audio cable) - Full 3D Support (defines common 3D formats and resolutions for HDMI-enabled devices, enabling 3D gaming and other 3D video applications)
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Sold by the piece
SKU: HD-20 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-3 High Speed HDMI Cable
Specifications
- 3ft (0.91m)
- Gold Plated Connectors
- Triple Shielded
- 4K X 2K Resolution Support
- HDMI Ethernet Cable (Eliminates the need of additional Ethernet cables to connect other internet-enabled HDMI devices in the network)
Audio Return Channel (enables two-way audio transmission between the A/V receiver and HDTV, eliminating the need of a separate audio cable) - Full 3D Support (defines common 3D formats and resolutions for HDMI-enabled devices, enabling 3D gaming and other 3D video applications)
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Sold by the piece
SKU: HD-3 -
Accessories, Accessories, Gaming AR/VR Audio, Home Audio
HD-RA HDMI Adapter (PAIR)
Specifications
- Right angled design prevents damage to home audio equipment
- Gold Plated Connectors
- Triple Shielded
- 4K Resolution Support
- Full HD 1080p+ for deep vibrant color and absolute picture clarity
- Supports any TV refresh rates (120/240/480/600Hz)
- 100% Backward Compatible
- 10.2 Gigabit/sec High Speed Bandwidth
- Supports Auto Lip-Sync, Dolby TrueHD and DTS-HD
- CEC (Consumer Electronics Control)
- Priced and sold by the pair
SKU: HD-RA (PAIR) -
Car Audio, DJ / Pro Audio, DJ/PA Monitors, Horns & Tweeters, Pro Sound, Tweeters
HDX2 Compression Horn Driver (PAIR)
Car Audio, DJ / Pro Audio, DJ/PA Monitors, Horns & Tweeters, Pro Sound, TweetersHDX2 Compression Horn Driver (PAIR)
Designed and engineered in the USA by Earthquake Sound, the 250 Watt 1-inch high-efficiency HDX2 Compression Horn Driver is recognized for its outstanding performance and sound quality. Sold in pairs, this driver is designed explicitly for medium band reproduction, making it perfect for midrange applications in SPL car audio systems or compact PA setups. The HDX2 features a universal 1-⅜” screw-on connection, allowing for the effortless integration of a horn. With its smooth frequency response and accurate high-frequency reproduction, this driver has become a favorite among audio enthusiasts.
Its robust diecast aluminum housing ensures durability and longevity, even under demanding conditions. The driver is crafted with precision components that minimize distortion, enhancing the clarity and richness of the audio output. Whether upgrading your vehicle’s audio system or setting up a PA system for an event, the HDX2 offers versatility and reliability. Its compact design does not compromise on power, delivering impressive sound that resonates with depth and detail. Audio professionals and hobbyists appreciate its ability to elevate sound experiences, making it a valuable addition to any audio setup.
SKU: HDX2 (PAIR) -
Accessories, Accessories, Accessories, Car Audio, Home Audio
HLLC-200 High/Low Level Converter
Features
- Reduces high power output of an amplifier to produce a low level input.
- Allows users to reduce the signal level down to a range 0.1 volts to 5 volts.
- Will not short the output
- Hi/low level converter
- 4-channel signal outputs
- Signal noise eliminator
- Adjustable output level
- Auto remote amplifier turn-on
- Great for leased vehicles
Applications
- Mobile Audio: Tap into the rear speakers to use their signal to power the high-level input.
- If you do not use differential input, you can burn your factory radio or head unit.
- Use the signal/music in the vehicle to generate a turn on power for a trunk mounted amplifier without running wires from the front all the way to the back.
- Home Audio: Add a subwoofer to your powered speakers by supplying the high level signal from them to the HLLC and set the pot to match the subwoofer.
- Pro Audio: Pair with Hum Kleaner for installations that have run distance of 20 ft and up to 200 ft. Hum Kleaner increases gain at the source and HLLC reduces the gain back down at the end of the run to amplifier input level.
Other Information
Model: HLLC-200
UPC: 0168975911032
Priced and sold by the pieceSKU: HLLC-200 -
Car Audio, Subwoofers
HoLeeS-15
The Earthquake HoLeeS-15 is a gigantic subwoofer driver with spectacular properties. Have you reached the audio evolutionary stage where only the best and most extreme can get your attention? – Then you’re ready for HoleeS. The HoLeeS-15 is an ultra-high-impact shockwave generator that easily hammers any LFE material in detail with no compression at explosive sound levels. HoleeS is the ultimate combination of dynamic surplus and detailed reproduction.
HoLeeS is a tour de force of how advanced design and technology can come together to create superior sound quality. All design aspects have been perfected to the smallest detail, resulting in revolutionary woofer performance. HoleeS is capable of an incredible 4″ excursion. With an excursion of this magnitude, HoleeS produces levels of bass unattainable by conventional woofers. The extreme excursion ability, coupled with the unique suspension, makes HoleeS extremely transient proficient. Even a light touch on the cone easily moves it several centimeters. This ease of movement, combined with the ultra-powerful magnet system, results in a spectacularly fast and precise response. HoleeS is free of the mechanical and electrical constraints inherent to typical woofers.
NOTE: The HoLeeS is a made-to-order product. Please allow 1 to 2 business days for assembly.
SKU: HoLeeS-15 -
Accessories, Accessories, Accessories, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
Hum Kleaner
Features
- Balanced XLR and TRS inputs and outputs
- Unbalanced RCA inputs and outputs
- Adjustable stereo balanced and unbalanced output level control
- Input selector switch
- Low noise, low distortion circuitry
- External 24V AC power supply included
Applications
- Home Audio
- Professional
- Recording Studios
- Live Music
- DJ/PA
- When signals need to be pushed long distances while retaining clarity
- Mixers
- Audio Processors
- Laptop Computers
- CD/DVD Players
- Gaming Consoles
- Powered Monitors
- Digital Workstations.
Specifications
- Gain range on RCA out = 1V MAX 12dBV
- Gain range on XLR out = 0dBV MAX 18dBV
- Input Gain Limit = 5VAC with MAX out
- RCS = 9VAC
- XLR = 18VAC
- Frequency Response: 20Hz–20kHz ±2dB
- Gain Separation: 80dB @ 1000Hz
- Input Impedance: Balanced: 20 kOhms / Unbalanced: 100 kOhms
- Output Impedance: Balanced: 100 Ohms / Unbalanced: 300 Ohms
- Maximum Gain Limit: 5 VAC
- Maximum Output
- RCA:9V
- XLR:18V
- TRS:18V
- Output Gain: 18dBV
- Signal to Noise Ratio: 114 dB @ full level
- THD: < .0003% @ 1kHz
Other Information
Model: Hum Kleaner
UPC: 0689759001676
Priced and sold by the piece
SKU: Hum Kleaner -
Open Box, Open Box, Open Box
Hum Kleaner (Open-Box)
Features
- Balanced XLR and TRS inputs and outputs
- Unbalanced RCA inputs and outputs
- Adjustable stereo balanced and unbalanced output level control
- Input selector switch
- Low noise, low distortion circuitry
- External 24V AC power supply included
Applications
- Home Audio
- Professional
- Recording Studios
- Live Music
- DJ/PA
- When signals need to be pushed long distances while retaining clarity
- Mixers
- Audio Processors
- Laptop Computers
- CD/DVD Players
- Gaming Consoles
- Powered Monitors
- Digital Workstations.
Specifications
- Gain range on RCA out = 1V MAX 12dBV
- Gain range on XLR out = 0dBV MAX 18dBV
- Input Gain Limit = 5VAC with MAX out
- RCS = 9VAC
- XLR = 18VAC
- Frequency Response: 20Hz–20kHz ±2dB
- Gain Separation: 80dB @ 1000Hz
- Input Impedance: Balanced: 20 kOhms / Unbalanced: 100 kOhms
- Output Impedance: Balanced: 100 Ohms / Unbalanced: 300 Ohms
- Maximum Gain Limit: 5 VAC
- Maximum Output
- RCA:9V
- XLR:18V
- TRS:18V
- Output Gain: 18dBV
- Signal to Noise Ratio: 114 dB @ full level
- THD: < .0003% @ 1kHz
Other Information
Model: Hum Kleaner
UPC: 0689759001676
Priced and sold by the pieceSKU: Hum Kleaner (B-Stock) -
Car Audio, Subwoofers
i82SWS Shallow Woofer System
SWS – The OG Shallow Woofer Design
The i82SWS Shallow Woofer System is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 8-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability.
SKU: i82SWS -
Amplifiers, Home Audio
IQ-1500 Plate Amplifier
Features
- Earthquake Class J circuitry
- XLR/RCA and high level input connections
- 20Hz, 30Hz, and 40Hz room equalization with 12dB range and boost
- Adjustable 24dB lowpass filter from 40Hz–200Hz with bypass
- 25Hz, 12dB/Oct switchable subsonic filter
- Full and advanced room correction
- IR input and remote control with volume control
- Auto signal sensing on/off switch
- Protection Circuitry:
- Short circuit
- Open circuit
- RF burnout
- Over temp
- Turn on/off transient protection
- DC protection
- Limiter circuitry
- Phase shift
- Phase Delay
- Custom flush mount design
- Dual gains internally mixed
- Channel and power status LEDs
- DC turn ON/OFF
- 110V/220V AC selector
Specifications
- Power Output:
- 3000 watts dynamic effect pinknoise
- 1 x 1500 watts RMS @ 2 Ohms Mono (1% distortion)
- 1 x 1100 watts RMS @ 4 Ohms Mono (1% distortion)
- 1 x 700 watts RMS @ 8 Ohms Mono ( 1% distortion)
- Frequency Response: 10–2kHz
- Load Impedance: 2 Ohm or greater
- Total Harmonic Distortion: <0.08% (1W/4)
- Slew Rate: 55V/microsecond
- Signal to Noise Ratio: > 106dB (balanced) 105dB (unbalanced) @ rated power
Dimensions
- Overall Dimensions: 11.65″ (296mm) x 8.5″ (216mm) x 3.84″ (mm)
- Plate thickness : 0.19″ (5mm)
- Cut Out Hole: 10.62″ (270mm) x 7.28″ (185mm)
- Transformer: 3.74″ (95mm) x 4.72″ (120mm) x 4.72″ (120mm)
- Weight: 26.04 lbs (12.2 kgs)
Other Information
Model: IQ-1500
UPC: 0068975900152
Priced and sold by the pieceSKU: IQ-1500 -
Home Audio, In-Wall & In-Ceiling Speakers
IQ6D
Features
- Edgeless design for seamless blend
- 6.5″ (133mm) low mass woven glass fiber cone woofer, dual voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C6
Specifications
- Power Handling: 25–300 Watts
- Frequency Response: 40Hz–21kHz
- Sensitivity: 93dB @ 1W/1M
- Impedance: Dual 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall Diameter with Grille: 9″ (228mm)
- Cut Out Diameter: 7.87″ (200mm)
- Mounting Depth: 3.75″ (94mm)
Other Information
Model: IQ6D
UPC: 0068975901302
Priced and sold by the pieceSKU: IQ6D -
Home Audio, In-Wall & In-Ceiling Speakers
IQ6S (Pair)
Features
- Edgeless design for seamless blend
- 6.5″ (133mm) low mass woven glass fiber cone woofer, single voice coil
- Dual 3/4″ swiveling silk dome neodymium tweeters
- On-Axis 180° positioning for better staging and imaging
- Overhung butyl rubber surround with PistonMax™ Technology
- 12dB/Oct crossover filter network
- +/- 3dB tweeter and woofer controls
- Gold plated spring loaded terminals
- Easy install “Turn-N-Lock™” mechanism
- Poly switch for tweeter protection
- Paintable anti-rust magnetic grilles
- Rough-in kit ready with the RK-C6
Specifications
- Power Handling: 25–300 Watts
- Frequency Response: 40Hz–21kHz
- Sensitivity: 93dB @ 1W/1M
- Impedance: 8 Ohm
- Crossover Filter Network:
- High pass 12dB/Oct. @ 2kHz
- Low pass 12dB/Oct. @ 2kHz
Dimensions
- Overall Diameter with Grille: 9″ (228mm)
- Cut Out Diameter: 7.87″ (200mm)
- Mounting Depth: 3.75″ (94mm)
Other Information
Model: IQ6S
UPC: 0068975901296
Priced and sold by the pairSKU: IQ6S
