Shop
Showing 265–278 of 278 results
-
Car Audio, Coaxial Speakers
VTEK-57
Earthquake VTEK-57 coaxial speakers were designed with an emphasis on OEM applications, installing precision, high-quality aftermarket speakers in factory-upgraded vehicles. The 5×7-inch VTEK-57 delivers quality and performance while eliminating the need to buy overpriced replacement speakers from the vehicle or audio manufacturer. Earthquake’s VTEK speakers cost less, perform better, and will reach you in less time.
With several features that enhance sound quality, performance, and protection, the VTEK-57 delivers the best OEM sound possible at the best price possible. Features such as glass fiber cone bodies for faster and more accurate dynamic responses, die-cast aluminum baskets for additional self-cooling, PistonMax drive technology for higher sound quality plus quantity, and 20mm swiveling silk dome neodymium tweeters result in the smoothest, highest, and most precise highs possible.
SKU: VTEK-57 -
Car Audio, Coaxial Speakers
VTEK-57Xi
Xtreme Impedance Series 5″x7″ 2-Way Car Speaker
Earthquake VTEK-57Xi coaxial speakers were designed with an emphasis on OEM applications to install precision, high-quality aftermarket speakers in factory-upgraded vehicles. The 5×7 inch VTEK-57Xi offers quality and performance while eliminating the need to buy overpriced replacement speakers from the vehicle or audio manufacturer. Earthquake’s VTEK speakers cost less, perform better, and will reach you in less time.
With several features that enhance sound quality, performance, and protection, the VTEK-57Xi provides the best OEM sound possible at the best price possible. Features such as glass fiber cone bodies for faster and more accurate dynamic responses, high-flow powder-coated steel baskets, PistonMax™ driver technology for higher sound quality plus quantity, and 20mm swiveling silk dome Neodymium tweeters result in the smoothest, highest, and most precise highs possible.
SKU: VTEK-57xi -
Car Audio, Coaxial Speakers
VTEK-62
Features
- High-end 2-way coaxial speaker
- Swiveling silk dome Neodymium tweeter
- Tri-layered glass fiber cone with electroplated aluminum surface sealer
- NOMEX/ROMEX spider assembly
- Overhung rubber surround
- PistonMax™ Technology
- Woofer protection circuitry
- Die-cast basket
- Long excursion
Specifications
- Woofer: 6.5″ (165mm)
- Tweeter: 0.78″ (20mm)
- Power Handling: 50–500 Watts
- Frequency Response: 45Hz–22kHz
- Sensitivity: 90dB @ 1W/1M
- Nominal Impedance: 4-Ohm
Dimensions
- Frame Outer Diameter: 6.49″ (165mm)
- Grille Tray Outer Diameter: 7.07″ (179.5mm)
- Grille Protrusion: 0.94″ (24mm)
- Mounting Depth: 2.51″ (64mm)
- Magnet Width: 4.03″ (102.29mm)
- Cut Out Hole: 5.74″ (146mm)
Other Information
Model: VTEK-62
UPC: 1550668975961
Priced and sold by the pairSKU: VTEK-62 -
Car Audio, Coaxial Speakers
VTEK-693
Earthquake’s VTEK-693 coaxial speaker was designed with an emphasis on OEM applications to install precision high-quality aftermarket speakers in factory-upgraded vehicles. The 6×9 inch VTEK-693 delivers quality and performance while eliminating the need to buy overpriced replacement speakers from the vehicle or audio manufacturers. Earthquake’s VTEK speakers cost less, perform better, and will reach you in less time.
With several features that enhance sound quality, performance, and protection, the VTEK-693 coaxial speaker delivers the best OEM sound possible at the best price possible. Features such as glass fiber cone bodies for faster and more accurate dynamic responses, die-cast aluminum baskets for additional self-cooling, PistonMax drive technology for higher sound quality plus quantity, and 20mm swiveling silk dome neodymium tweeters result in the smoothest, highest, and most precise highs possible.
SKU: VTEK-693 -
Car Audio, Component Speaker Sets
VTEK-MC5 Component Set
Features
- Tri-layer carbon fiber cone with electroplated aluminum surface sealer
- Overhung rubber surround
- Cast aluminum basket
- High precision 1″ silk dome neodymium tweeters
- Four mounting options
- New carbon fiber styled crossover
- Over-sized polypropylene crossover capacitors
- 12db per octave slopes
- Flat or -3db tweeter connections
- Passive Xover
- Speaker Wires
- Die Cast
- 2-Way Speaker
Specifications
- Midbass: 5.25″ / 1″ voice coil
- Tweeter: 1″ silk dome
- Rec. Amp Power: 500W Max
- Frequency Response: 45Hz-23kHz (±3dB)
- Sensitivity: 91dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Depth: 2.18″ (55.37mm)
- Magnet Diameter: 3.38″ (86mm)
- Cut-out hole: 4.72″ (120mm)
Parameters
- Revc = 3.0000Ohm
- Fo = 129.528Hz
- Sd = 8.900msqM
- BL = 3.706TM
- Qms = 1.928
- Qes = 1.721
- Qts = 0.909
- No =0.214%
- SPLo = 85.3dB
- Vas = 61.956mcuFt
- Cms = 155.978uM/N
- Krm = 306.459uOhm
- Erm = 0.899
- Mms = 9.680g
- Mmd = 9.197mKg
- Kxm = 14.133mOhm
- Exm = 0.542
SKU: VTEK-MC5 -
Car Audio, Enclosures
WB1 Pump Passive Enclosure
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Preinstalled Pump-12 Passive Radiator for extended low frequency response and maximum output.
- Black spray-on polyurethane bed liner material is applied to all enclosures for durability and chipping resistance.
- Available with single loaded 12 inch driver.
- DBXI – DBXI-12D
- MAGMA – MAGMA-12X
- Wedge-shaped enclosure design.
- Pre-installed gold-plated wire terminals included.
SKU: n/a -
Car Audio, Subwoofers
X84SWS Shallow Woofer System
SWS – The OG Shallow Woofer Design
The X84SWS is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 8-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability. The Earthquake 8-inch SWS was initially designed for BMW’s concealed subwoofers positioned under the seats, delivering accurate and deep bass frequencies directly to the listener’s seating area. This setup enhances response time due to its proximity, offering a more immersive listening experience.SKU: X84SWS -
Home Audio, Specials
XJ Wi-Fi Streaming Bundle
XJ-300ST Features
- Compact size
- Wall or 1U rack mountable
- Class J Stereo Modular design
- Auto Signal/Music Sensing
- Built in room corrections and 0–180° phase adjustments
- Bypass/Lowpass Toggle Switch
- RCA Input
- +12V Trigger
- Volume Control
- Built-in 50–160Hz Crossover
- 110V/220V Selectable
- Flat Black Finish
- Interlocking Design For Fitting Two Amplifiers Into Single 1U Rack Space
- 4 Detachable Rack Ears Included
- 1 Connector Bracket Included (Used to connect multiple XJ-300ST amplifiers)
- Optional Long Ear Extension Brackets Available – RM-300FR
- Technology Integrator’s 2016 Impact! Awards Finalist
XJ-300ST Specifications
- Power Output:
- 2 x 110 WRMS @ 8-Ohm
- 2 x 170 WRMS @ 4-Ohm
- 170 WRMS @ 8-Ohm Mono Bridged
- 300 WRMS @ 4-Ohm Mono Bridged
- Frequency Response: 20Hz–20kHz
- High Pass Filter: 15Hz
- Phase Infinitely Variable: 0–180°
- Crossover: 50Hz–160Hz
- Signal To Noise: 101dB
- Load Impedance: 2 Ohms or greater
- THD: 0.08%
- Damping Factor:> 1400
- Power Line Voltage: 110-220 ~ AC50/60Hz
ARO-300 Features
- Stream audio from your Wi-Fi-enabled mobile devices
- High-fidelity lossless audio transmission with up to 300 Mbps
- Wi-Fi transmission range over 50 feet (15m)
- Twice the range of 5GHz wireless
- Supports iOS® and Android®
- Open source app control
- One-to-One and One-to-Multiroom operations
- Supports 802.11 b/g/n/ac 2.4GHz networks
- Supports 10/100 Mbps Ethernet
- LAN/Ethernet input
- Optical Input
- USB in port (Store audio files on USB drive)
- 3.5mm Line output
- 3.5mm Line input
- WPS (Wi-Fi Protected Setup)
- Dual long range antennas
- One Touch Party Mode
ARO-300 Specifications
- Working Voltage: 3.5–5.0 V DC
- Current:
- Work: 130~320 mA 350
- Peak: 350 mA
- Standby: 20 mA
- Operation Temperature: 23–104°F (-5–40°C)
- Frequency Range: 2.412–2.484 GHz
- DAC: SNR 96 dB
- Wireless Specs:
- Certification: FCC/CE
- Standard: 802.11 b/g/n/ac
- Distance: 50ft (15m)
In The XJ-300ST Box
- (1) XJ-300ST Stereo Class J Amplifier
- (4) Short Mounting Ears
- (12) Screws for Mounting Ears
- (1) Back Bracket
- (4) Back Bracket Screws
- (4) Rubber Feet
- (1) Power Cord
In The ARO-300 Box
- (1) ARO-300 WiFi Audio Router
- (1) 5V (2A) Power Supply
- (1) 3.5mm to RCA Cable (4 feet)
- (1) Micro USB Cable (5 feet)
SKU: XJ-300ST (SPECIAL) -
DJ / Pro Audio, Home Audio, Open Box, Open Box, Open Box
XJ-1000FR (Open-Box)
Specifications
- Digital Signal Processing
- Left / Right RCA Inputs
- Left / Right XLR Balanced Inputs
- Stereo / Bridged Switch
- Output Power:
- 1 x 1000 WRMS at 4Ω Bridged
- 1 x 600 WRMS at 8Ω Bridged
- 2 x 300 WRMS at 4Ω
- 2 x 150 WRMS at 8Ω
- 2 x 500 WRMS at 2Ω
- External Trigger Input
- USB Port
- MAC & PC compatible
- DRCDC (Dynamic Rail Control Drive Circuitry)
SKU: XJ-1000FR (B-Stock) -
Amplifiers, Amplifiers, Amplifiers, DJ / Pro Audio, Home Audio
XJ-1000FR Full-Range Stereo Amplifier
Features
- Digital Signal Processing
- DRCDC (Dynamic Rail Control Drive Circuitry)
- Left / Right RCA Inputs
- Left / Right XLR Balanced Inputs
- Stereo / Bridged Switch
- External Trigger Input
- USB Port
- MAC & PC compatible
- Detachable Rack Ears
- Not suitable for powering tactile transducers
Specifications
- Output Power:
- 1 x 1400 Watt IHF (4-Ohms Mono)
- 1 x 1000 Watt IHF (8-Ohms Mono)
- 2 x 700 Watt IHF (2-Ohms stereo)
- 2 x 500 Watt IHF (4-Ohms stereo)
- 2 x 300 Watt IHF (8-ohms stereo)
- 1 x 1000 WRMS (4-Ohms Mono)
- 1 x 600 WRMS (8-Ohms Mono)
- 2 x 500 WRMS (2-Ohms stereo)
- 2 x 300 WRMS (4-Ohms stereo)
- 2 x 150 WRMS (8-ohms stereo)
- Load Impedance: 2 Ohms or greater
- Frequency Response 10Hz-24kHz
- Total Harmonic Distortion <0.02%
- Signal to Noise Ratio: 112dB (balanced) 108dB (unbalanced)@ rated power
- Damping factor above 1500 @ 200Hz 4-Ohm
SKU: XJ-1000FR -
DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, Open Box, Open Box, Open Box
XJ-300ST (Open-Box)
Specifications
- Compact size: 8 ½ in (W) x 8 in (D) x 1 7⁄8 in (H)
- Wall or 1U rack-mountable
- Class J Stereo Modular design
- Auto Signal/Music Sensing
- Built-in room corrections and 0–180° phase adjustments
- RCA input
- +12V Trigger
- Volume control
- 50–160Hz built-in crossover
- 110V/220V Selectable
- Technology Integrator’s 2016 Impact! Awards Finalist
SKU: XJ-300ST (B-Stock) -
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
XJ-300ST Stereo Amplifier
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home AudioXJ-300ST Stereo Amplifier
Features
- Class J stereo modular design provides cool running power
- Its compact and unimposing size makes it an installer’s go-to amplifier
- Numerous application possibilities with customizable channel setup
- Allows for MONO bridged, 2-channel, and 2.1-channel wiring configuration
- Versatility allows for multi-channel audio systems
- Proprietary Interlocking Design
- Used for joining two XJ-300STs for side-by-side rack mounting
- 1U rack space tall with half-rack width chassis
- Signal sensing toggle switch with +12V trigger input
- Selective variable crossover
- Bypass/lowpass toggle switch
- Turns crossover on or off
- 0–180° phase adjustment
- 110V/220V AC selector
- RCA inputs
- Volume control
- 4 detachable short rack ears included
- Used for both rack and wall mounting
- Back bracket included
- Links multiple XJ-300ST amplifiers
- Optional long ear extension brackets available – RM-300FR
- Technology Integrator’s 2016 Impact! Awards Finalist
Specifications
- Output Power:
- 2 x 110 WRMS @ 8-Ohm
- 2 x 170 WRMS @ 4-Ohm
- 170 WRMS @ 8-Ohm Mono Bridged
- 300 WRMS @ 4-Ohm Mono Bridged
- Frequency response: 20Hz–20kHz
- Input Impedance: 10 kOhm
- Impedance: 4–8 Ohm
- Crossover Frequency: 50Hz–160Hz
- SNR: > 97 dB
- Damping Factor: > 400
- THD: < 0.08%
In The Box
- (1) XJ-300ST Stereo Class J Amplifier
- (4) Short Mounting Ears
- Mounting screws included
- (1) Back Bracket
- Mounting screws included
- (4) Rubber Feet
- (1) Power Cord
Other Information
Model: XJ-300ST
EAN: 0068975901388
Priced and sold by the pieceSKU: XJ-300ST -
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio
XJ-700DSP LFE Mono Amplifier
Amplifiers, Amplifiers, Amplifiers, Augmented/Virtual Reality, DJ / Pro Audio, Gaming AR/VR Audio, Home AudioXJ-700DSP LFE Mono Amplifier
Features
- High Power LFE Mono Block Subwoofer Amplifier
- App Controlled DSP (iWoofer™ Pro recommended)
- Amplifier Class: Class J
- Channels/Zones: 1
- Transformer Type: Toroidal Transformer
- Built-In Boundary Equalizer
- 0–180° Phase Adjustment
- DSP ON/OFF switch
- Movie/Music Mode Preset Button
- ON/AUTO/+12V Signal Sensing
Specifications
- Power Output:
- 1 x 700 WRMS @ 4-Ohm
- 1 x 400 WRMS @ 8-Ohm
- Frequency Response: 18Hz–160Hz
- Crossover Frequency: 40Hz–160Hz
- Output Connections:
- 5-Way Speaker Binding Posts
- RCA (DSP OUT)
- THD: < 0.02% (1W/4-Ohm)
- S/N:
- > 112dB (Balanced)
- > 108dB (Unbalanced)
- Load Impedance: 4 Ohm or greater
- Damping Factor: > 500
- Slew Rate: 50 V/ms
- Rack Mountable (1U space)
Note: The minimum rated impedance is 4-Ohm total. On the actual amp it specifies 4-Ohm minimum on each terminal. These terminals however operate as one meaning that you can either put a 4-Ohm load on one of them and none on the other OR put an 8-Ohm load on both of them resulting in a total impedance of 4-Ohm.
Dimensions
- H x W x D: 1.92″ (49mm) x 18″ (482.5mm) x 11.33″ (288mm)
- Includes feet, mounts, and protrusions
- Weight: 19.7 lbs (8.95 kgs)
Other Information
Model: XJ-700DSP
EAN: 0689759001973
Priced and sold by the pieceSKU: XJ-700DSP
