Shop
Showing 241–264 of 269 results
-
Car Audio, Coaxial Speakers
TNT T693X Coaxial Speaker
Features
- 3-way high performance coaxial speaker
- Low mass poly injection cone body provides precision sound quality
- Poly cone midbass woofer
- Mylar mid-range tweeter
- Mylar dome super tweeter
- High flow ventilation stamped steel basket design
- Large butyl rubber surround for accurate bass output
- NOMEX/ROMEX spider assemblies for linear travel and durability
- Shallow mount design for more flexible installations
- Speaker grilles included
- Graphite scheme for easier color matching
Specifications
- Midbass: 6×9″ (152.4mm x 228.6mm)
- Mid-range tweeter: 2″ (66mm) Mylar mid-range tweeter
- Super Tweeter: 1.18″ (30mm) neodymium motor
- Power Handling: 600 Watts MAX
- Frequency Response: 20Hz–22kHz
- Nominal Impedance: 4-Ohm
- Sensitivity: 90dB
- Mounting Diameter: 6.10″ (151mm) x 8.66″ (220mm)
- Mounting Depth: 3.38″ (86mm)
Other Information
Model: T693X
UPC: 0168975910592
Priced and sold by the pairSKU: T693X -
Car Audio, Subwoofers
TNT-10DVC
Features
- 10″ subwoofer
- Dual voice coil
- Polypropylene cone bodies
- High roll surround
- Stitched tinsel leads
- Spring loaded terminals
- Triple voice coil ventilations
- Thick high density magnet
- 2″ 4-wound aluminum bobbin
Specifications
- Power Handling: 300 WRMS / 1000 Watts Max
- Impedance: Dual 4-Ohm
- Efficiency (1W/1M): 85dB SPL
- Sealed Enclosure: 1.0 to 1.35 cu. ft.
- Ported Enclosure: 1.26 to 1.60 cu. ft.
- External dimensions provided using 3/4” MDF
- Enclosures are designed to play at 40Hz and up
Parameters
- Free Air Resonance (Fs): 36Hz
- Electrical “Q” (Qes): 1.102
- Mechanical “Q” (Qms): 5.551
- Total Speaker “Q” (Qts): 0.90
- Xmax: 2″ (50.8mm)
- REVC: 3.6 Ohm
- BL: 8.39 T-m
- VAS: 23.53 Lit / .831 cu. ft.
Dimensions
- Outer Diameter: 10.06″ (256mm)
- Cut Out Diameter: 9.62″ (245mm)
- Mounting Depth: 5.37″ (136mm)
- Magnet Diameter: 5.5″ (140mm)
- Weight: 8.84 lbs (4.00 kgs)
Other Information
Model: TNT-10DVC
EAN: 0168975910547
Priced and sold by the pieceSKU: TNT-10DVC -
Car Audio, Subwoofers
TNT-12DVC
Features
- 12″ subwoofer
- Single voice coil
- Polypropylene cone bodies
- High roll surround
- Stitched tinsel leads
- Spring loaded terminals
- Triple voice coil ventilations
- Thick high density magnet
- 2″ 4-wound aluminum bobbin
Specifications
- Power Handling: 400 WRMS / 1250 Watts Max
- Impedance: 4-Ohm
- Efficiency (1W/1M): 87dB SPL
- Sealed Enclosure: 1.27 to 1.60 cu. ft.
- Ported Enclosure: 1.35 to 1.75 cu. ft.
- External dimensions provided using 3/4” MDF
- Enclosures are designed to play at 40Hz and up
Parameters
- Free Air Resonance (Fs): 32Hz
- Electrical “Q” (Qes): 0.903
- Mechanical “Q” (Qms): 7.169
- Total Speaker “Q” (Qts): 0.80
- Xmax: 2″ (50.8mm)
- REVC: 3.6 Ohm
- BL: 11.12 T-m
- VAS: 45.7 L / 1.614 cu. ft.
Dimensions
- Outer Diameter: 12.20″ (310mm)
- Cut Out Diameter: 11.65″ (296mm)
- Mounting Depth: 5.98″ (152mm)
- Magnet Diameter: 5.51″ (140mm)
- Weight: 9.48 lbs (4.30 kgs)
Other Information
Model: TNT-12DVC
EAN: 0168975910561
Priced and sold by the pieceSKU: TNT-12DVC -
Car Audio, Subwoofers
TNT-12S
Features
- 12″ subwoofer
- Single voice coil
- Polypropylene cone bodies
- High roll surround
- Stitched tinsel leads
- Spring loaded terminals
- Triple voice coil ventilations
- Thick high density magnet
- 2″ 4-wound aluminum bobbin
Specifications
- Power Handling: 400 WRMS / 1250 Watts Max
- Impedance: 4-Ohm
- Efficiency (1W/1M): 87dB SPL
- Sealed Enclosure: 1.27 to 1.60 cu. ft.
- Ported Enclosure: 1.35 to 1.75 cu. ft.
- External dimensions provided using 3/4” MDF
- Enclosures are designed to play at 40Hz and up
Parameters
- Free Air Resonance (Fs): 32Hz
- Electrical “Q” (Qes): 0.903
- Mechanical “Q” (Qms): 7.169
- Total Speaker “Q” (Qts): 0.80
- Xmax: 2″ (50.8mm)
- REVC: 3.6 Ohm
- BL: 11.12 T-m
- VAS: 45.7 L / 1.614 cu. ft.
Dimensions
- Outer Diameter: 12.20″ (310mm)
- Cut Out Diameter: 11.65″ (296mm)
- Mounting Depth: 5.98″ (152mm)
- Magnet Diameter: 5.51″ (140mm)
- Weight: 9.48 lbs (4.30 kgs)
Other Information
Model: TNT-12S
EAN: 0168975910554
Priced and sold by the pieceSKU: TNT-12S -
Car Audio, Subwoofers
Tremor-X124 (Pair)
Value-Driven Design & Performance
The Tremor-X124 Subwoofer is Earthquake Sound’s value-performance leader. The design has been thoroughly rationalized and optimized in every detail. Nothing superfluous was added, and nothing important was removed. TremorX has inherited several key technologies from the more expensive Earthquake subwoofer lines. The result is a subwoofer peerless in its class. Optimized in-house production allows signature strong properties at an unprecedented low price. TremorX is evidence that low price and high quality can coexist. Rational manufacturing rather than quality reduction are keywords of the TremorX design. With advanced Earthquake technologies such as TCT (Turbine-Cooled Transducer), XLT chassis geometry, Mill-Temp aluminum voice coil, dual symmetrical stitched tinsel leads, and WE (Wide Edge) suspension, TremorX is ready for serious low frequency combat. Solid quality and refined engineering make TremorX a choice for the price- and performance-oriented enthusiast.
SKU: Tremor-X124 Pair -
Car Audio, Subwoofers
Tremor-X12D4 (Pair)
Features
- TCT Technology (Turbine Cooled Transducer) for high-efficiency output
- XLT chassis geometry allows for extra length between the spider and the magnetic gap
- Wide edge suspension for significant excursion without deformation or increased mechanical resistance
- Anti-wobble cone construction
- Military-grade dual voice coil
- Heavy-duty stitched leads
- Spring loaded terminals
Specifications
- 12″ Subwoofer
- Power Handling: 400W RMS / 1250W Max
- Impedance: 2 x 4-Ohm
- Efficiency (lW/lM): 84.8 dB SPL
- One Way Linear Excursion: 1.12″ (28.56mm)
Dimensions
- Overall Diameter: 15.43″ (392mm)
- Cutout Diameter: 13.74″ (349mm)
- Mounting Depth: 6.77″ (172mm)
- Motor Diameter: 6.14″ (156mm)
Parameters
- Fs: 31.2Hz
- Qes: 1.034
- Qms: 2.127
- Qts: 0.696
- Vas: 4.1 ft3 / 116.1 L
- BL: 17.302 TM
Other Information
Model: Tremor-X12D4
EAN: 0689759101321
Priced and sold by the pairSKU: Tremor-X12D4 Pair -
Car Audio, Subwoofers
Tremor-X154 (Pair)
Value-Driven Design & Performance
The Tremor-X154 Subwoofer is Earthquake Sound’s value-performance leader. The design has been thoroughly rationalized and optimized in every detail. Nothing superfluous was added, and nothing important was removed. TremorX has inherited several key technologies from the more expensive Earthquake subwoofer lines. The result is a subwoofer peerless in its class. Optimized in-house production allows signature strong properties at an unprecedented low price. TremorX is evidence that low price and high quality can coexist. Rational manufacturing rather than quality reduction are keywords of the TremorX design. With advanced Earthquake technologies such as TCT (Turbine-Cooled Transducer), XLT chassis geometry, Mill-Temp aluminum voice coil, dual symmetrical stitched tinsel leads, and WE (Wide Edge) suspension, TremorX is ready for serious low frequency combat. Solid quality and refined engineering make TremorX a choice for the price- and performance-oriented enthusiast.
SKU: Tremor-X154 Pair -
Car Audio, Subwoofers
Tremor-X15D4 (Pair)
Features
- Heavy-duty stitched leads
- Spring loaded terminals
- Anti-wobble cone construction
- TCT Technology (Turbine Cooled Transducer) for high efficiency output
- XLT chassis geometry allows for extra length between the spider and the magnetic gap
- Wide edge suspension for significant excursion without deformation or increased mechanical resistance
- Military grade dual voice coil
Specifications
- 15″ Subwoofer
- Power Handling: 450 WRMS / 1500 Watts Max
- Impedance: 2 x 4-Ohm
- Efficiency (1W/1M): 86.3 dB SPL
- One Way Linear Excursion: 1.2″ (30.48mm)
Dimensions
- Overall Diameter: 15.43″ (392mm)
- Cutout Diameter: 13.74″ (349mm)
- Mounting Depth: 6.77″ (172mm)
- Motor Diameter: 6.14″ (156mm)
Parameters
- Fs: 28.8Hz
- Qes: 0.890
- Qms: 2.657
- Qts: 0.667
- Vas: 4.9 ft³ / 138.75 L
- BL (TM): 15.910 TM
Other Information
Model: Tremor-X15D4
EAN: 0689759101338
Priced and sold by the pairSKU: Tremor-X15D4 Pair -
Bundles, Car Audio
Trunk Slammer Bass Bundle
Features
- Bundle includes K-10 subwoofer tube, MiNi D1000 2nd Gen amplifier, and HLLC-200 high low level converter
- Great option for leased vehicles
- Simple and fully reversible audio solution
- 1 wire installation
- Works with factory head units
- Multiple mounting options
K-10 Subwoofer Tube
- 10″ Active Driver
- 10″ SLAPS Passive Radiator
- 800 Watts Max
- Impedance: 4-Ohm
- Frequency Response: 20Hz–1.5kHz
MiNi D1000 2nd Gen
- Channels: 1 (MONO)
- Class: Digital Class “D”
- Power and Protection LED
- RMS Power:
- 600 Watts @ 1-Ohm
- 360 Watts @ 2-Ohm
- 180 Watts @ 4-Ohm
- Max Power: 1200 Watts
- Comes complete with remote base knob and cable (over 20ft)
- 5.2V USB connector to power a Bluetooth™ or WiFi module
- Dimensions (H x W x D): 1-15/16″ (49mm) x 6-5/16″ (160mm) x 9-7/8″ (250mm)
HLLC-200
- Reduces high power output of an amplifier to produce a low level input.
- Allows users to reduce the signal level down to a range 0.1 volts to 5 volts.
- Use with factory or aftermarket radios that do not have dedicated RCA outputs.
- Will not short the output
- High to low level conversion
- 4-channel signal outputs
- Signal noise eliminator
- Adjustable output level
- Auto remote amplifier turn-on
- Great for leased vehicles
SKU: Trunk Slammer Bundle -
Car Audio, Tweeters
TW-05HD High-Definition Eyeball Tweeter
Features
- ½” high-definition eyeball tweeter
- High-performance neodymium magnet
- 12dB/Octave high pass filter @ 6kHz
- Raychem poly-switch protection
- Floating rubber suspension
- Silk dome
- Mount Options: Flush / Surface / Angle
Specifications
- Tweeter: ½” (12.7mm)
- Power Handling: 30 WRMS / 100 Watts Max
- Frequency Response: 4kHz–20kHz (±3dB)
- Sensitivity: 89dB @1W/1M
- Nominal Impedance: 4-Ohm
In The Box
- Two ½” eyeball tweeters
- Mounting hardware
- Two crossovers
- Two angled mounts
Other Information
Model: TW-05HD
UPC: 1301768975937
Priced and sold by the pairSKU: TW-05HD -
Accessories, Car Audio
UBT-0448 Universal Battery Terminal
Features
- Designed for high current applications and maximum power delivery
- High conductivity with platinum plated finish
- Comes with a positive/negative adapter
- One 0/1 AWS, one 4 AWG and two 8 AWG outputs
Other Information
Model: UBT-0448
UPC: 016897591943
Priced and sold by the pieceSKU: UBT-0488 -
Car Audio, Coaxial Speakers
VTEK-52
Features
- 2-Way Coaxial Speaker
- Midbass: 5.25″ / 1″ Voice Coil
- 20mm Swiveling Silk Dome Neodymium Tweeter
- Tri-layered Glass Fiber Cone with Electroplated Aluminum Surface Sealer
- NOMEX/ROMEX Spider Assembly
- Overhung Rubber Surround
- PistonMax™ Driver Technology
- Woofer Protection Circuitry
- Die Cast Basket
- Long Excursion
- High-End Coaxial
Specifications
- Rec. Amp Power: 400W Max
- Frequency Response: 55Hz–22kHz (±3dB)\
- Sensitivity: 89dB @ 1W/1M
- Nominal Impedance: 4-Ohm
Dimensions
- Frame outer diameter: 5.13″ (130.34mm)
- Grille tray outer diameter: 6.50″ (165mm)
- Mounting depth: 2.023” (51.4mm)
- Magnet width: 3.22″ (81.93mm)
- Cut out hole: 4.72″ (120mm)
SKU: VTEK-52 -
Car Audio, Coaxial Speakers
VTEK-52Xi
Xtreme Impedance Series 5.25″ 2-Way Car Speaker
The Earthquake Xtreme Impedance Series VTEK-52Xi coaxial speaker was designed with an emphasis on OEM applications to install precision, high-quality aftermarket speakers in factory-upgraded vehicles. The 5.25-inch VTEK-52Xi offers quality and performance while eliminating the need to buy overpriced replacement speakers from the vehicle or audio manufacturer. Earthquake’s VTEK speakers cost less, perform better, and will reach you in less time.
With several features that enhance sound quality, performance, and protection, the VTEK-52Xi coaxial speaker provides the best OEM sound possible at the best price possible. Features such as glass fiber cone bodies for faster and more accurate dynamic responses, die-cast aluminum basket for self-cooling, PistonMax™ driver technology for higher sound quality plus quantity, and 20mm swiveling silk dome Neodymium tweeters result in the smoothest, highest, and most precise highs possible.
SKU: VTEK-52Xi -
Car Audio, Coaxial Speakers
VTEK-57
Earthquake VTEK-57 coaxial speakers were designed with an emphasis on OEM applications, installing precision, high-quality aftermarket speakers in factory-upgraded vehicles. The 5×7-inch VTEK-57 delivers quality and performance while eliminating the need to buy overpriced replacement speakers from the vehicle or audio manufacturer. Earthquake’s VTEK speakers cost less, perform better, and will reach you in less time.
With several features that enhance sound quality, performance, and protection, the VTEK-57 delivers the best OEM sound possible at the best price possible. Features such as glass fiber cone bodies for faster and more accurate dynamic responses, die-cast aluminum baskets for additional self-cooling, PistonMax drive technology for higher sound quality plus quantity, and 20mm swiveling silk dome neodymium tweeters result in the smoothest, highest, and most precise highs possible.
SKU: VTEK-57 -
Car Audio, Coaxial Speakers
VTEK-57Xi
Xtreme Impedance Series 5″x7″ 2-Way Car Speaker
Earthquake VTEK-57Xi coaxial speakers were designed with an emphasis on OEM applications to install precision, high-quality aftermarket speakers in factory-upgraded vehicles. The 5×7 inch VTEK-57Xi offers quality and performance while eliminating the need to buy overpriced replacement speakers from the vehicle or audio manufacturer. Earthquake’s VTEK speakers cost less, perform better, and will reach you in less time.
With several features that enhance sound quality, performance, and protection, the VTEK-57Xi provides the best OEM sound possible at the best price possible. Features such as glass fiber cone bodies for faster and more accurate dynamic responses, high-flow powder-coated steel baskets, PistonMax™ driver technology for higher sound quality plus quantity, and 20mm swiveling silk dome Neodymium tweeters result in the smoothest, highest, and most precise highs possible.
SKU: VTEK-57xi -
Car Audio, Coaxial Speakers
VTEK-62
Features
- High-end 2-way coaxial speaker
- Swiveling silk dome Neodymium tweeter
- Tri-layered glass fiber cone with electroplated aluminum surface sealer
- NOMEX/ROMEX spider assembly
- Overhung rubber surround
- PistonMax™ Technology
- Woofer protection circuitry
- Die-cast basket
- Long excursion
Specifications
- Woofer: 6.5″ (165mm)
- Tweeter: 0.78″ (20mm)
- Power Handling: 50–500 Watts
- Frequency Response: 45Hz–22kHz
- Sensitivity: 90dB @ 1W/1M
- Nominal Impedance: 4-Ohm
Dimensions
- Frame Outer Diameter: 6.49″ (165mm)
- Grille Tray Outer Diameter: 7.07″ (179.5mm)
- Grille Protrusion: 0.94″ (24mm)
- Mounting Depth: 2.51″ (64mm)
- Magnet Width: 4.03″ (102.29mm)
- Cut Out Hole: 5.74″ (146mm)
Other Information
Model: VTEK-62
UPC: 1550668975961
Priced and sold by the pairSKU: VTEK-62 -
Car Audio, Coaxial Speakers
VTEK-693
Earthquake’s VTEK-693 coaxial speaker was designed with an emphasis on OEM applications to install precision high-quality aftermarket speakers in factory-upgraded vehicles. The 6×9 inch VTEK-693 delivers quality and performance while eliminating the need to buy overpriced replacement speakers from the vehicle or audio manufacturers. Earthquake’s VTEK speakers cost less, perform better, and will reach you in less time.
With several features that enhance sound quality, performance, and protection, the VTEK-693 coaxial speaker delivers the best OEM sound possible at the best price possible. Features such as glass fiber cone bodies for faster and more accurate dynamic responses, die-cast aluminum baskets for additional self-cooling, PistonMax drive technology for higher sound quality plus quantity, and 20mm swiveling silk dome neodymium tweeters result in the smoothest, highest, and most precise highs possible.
SKU: VTEK-693 -
Car Audio, Component Speaker Sets
VTEK-MC5 Component Set
Features
- Tri-layer carbon fiber cone with electroplated aluminum surface sealer
- Overhung rubber surround
- Cast aluminum basket
- High precision 1″ silk dome neodymium tweeters
- Four mounting options
- New carbon fiber styled crossover
- Over-sized polypropylene crossover capacitors
- 12db per octave slopes
- Flat or -3db tweeter connections
- Passive Xover
- Speaker Wires
- Die Cast
- 2-Way Speaker
Specifications
- Midbass: 5.25″ / 1″ voice coil
- Tweeter: 1″ silk dome
- Rec. Amp Power: 500W Max
- Frequency Response: 45Hz-23kHz (±3dB)
- Sensitivity: 91dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Depth: 2.18″ (55.37mm)
- Magnet Diameter: 3.38″ (86mm)
- Cut-out hole: 4.72″ (120mm)
Parameters
- Revc = 3.0000Ohm
- Fo = 129.528Hz
- Sd = 8.900msqM
- BL = 3.706TM
- Qms = 1.928
- Qes = 1.721
- Qts = 0.909
- No =0.214%
- SPLo = 85.3dB
- Vas = 61.956mcuFt
- Cms = 155.978uM/N
- Krm = 306.459uOhm
- Erm = 0.899
- Mms = 9.680g
- Mmd = 9.197mKg
- Kxm = 14.133mOhm
- Exm = 0.542
SKU: VTEK-MC5 -
Car Audio, Enclosures
WB1 Pump Passive Enclosure
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Preinstalled Pump-12 Passive Radiator for extended low frequency response and maximum output.
- Black spray-on polyurethane bed liner material is applied to all enclosures for durability and chipping resistance.
- Available with single loaded 12 inch driver.
- DBXI – DBXI-12D
- MAGMA – MAGMA-12X
- Wedge-shaped enclosure design.
- Pre-installed gold-plated wire terminals included.
SKU: n/a -
Car Audio, Subwoofers
X84SWS Shallow Woofer System
SWS – The OG Shallow Woofer Design
The X84SWS is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 8-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability. The Earthquake 8-inch SWS was initially designed for BMW’s concealed subwoofers positioned under the seats, delivering accurate and deep bass frequencies directly to the listener’s seating area. This setup enhances response time due to its proximity, offering a more immersive listening experience.SKU: X84SWS -
Home Audio, Specials
XJ Wi-Fi Streaming Bundle
XJ-300ST Features
- Compact size
- Wall or 1U rack mountable
- Class J Stereo Modular design
- Auto Signal/Music Sensing
- Built in room corrections and 0–180° phase adjustments
- Bypass/Lowpass Toggle Switch
- RCA Input
- +12V Trigger
- Volume Control
- Built-in 50–160Hz Crossover
- 110V/220V Selectable
- Flat Black Finish
- Interlocking Design For Fitting Two Amplifiers Into Single 1U Rack Space
- 4 Detachable Rack Ears Included
- 1 Connector Bracket Included (Used to connect multiple XJ-300ST amplifiers)
- Optional Long Ear Extension Brackets Available – RM-300FR
- Technology Integrator’s 2016 Impact! Awards Finalist
XJ-300ST Specifications
- Power Output:
- 2 x 110 WRMS @ 8-Ohm
- 2 x 170 WRMS @ 4-Ohm
- 170 WRMS @ 8-Ohm Mono Bridged
- 300 WRMS @ 4-Ohm Mono Bridged
- Frequency Response: 20Hz–20kHz
- High Pass Filter: 15Hz
- Phase Infinitely Variable: 0–180°
- Crossover: 50Hz–160Hz
- Signal To Noise: 101dB
- Load Impedance: 2 Ohms or greater
- THD: 0.08%
- Damping Factor:> 1400
- Power Line Voltage: 110-220 ~ AC50/60Hz
ARO-300 Features
- Stream audio from your Wi-Fi-enabled mobile devices
- High-fidelity lossless audio transmission with up to 300 Mbps
- Wi-Fi transmission range over 50 feet (15m)
- Twice the range of 5GHz wireless
- Supports iOS® and Android®
- Open source app control
- One-to-One and One-to-Multiroom operations
- Supports 802.11 b/g/n/ac 2.4GHz networks
- Supports 10/100 Mbps Ethernet
- LAN/Ethernet input
- Optical Input
- USB in port (Store audio files on USB drive)
- 3.5mm Line output
- 3.5mm Line input
- WPS (Wi-Fi Protected Setup)
- Dual long range antennas
- One Touch Party Mode
ARO-300 Specifications
- Working Voltage: 3.5–5.0 V DC
- Current:
- Work: 130~320 mA 350
- Peak: 350 mA
- Standby: 20 mA
- Operation Temperature: 23–104°F (-5–40°C)
- Frequency Range: 2.412–2.484 GHz
- DAC: SNR 96 dB
- Wireless Specs:
- Certification: FCC/CE
- Standard: 802.11 b/g/n/ac
- Distance: 50ft (15m)
In The XJ-300ST Box
- (1) XJ-300ST Stereo Class J Amplifier
- (4) Short Mounting Ears
- (12) Screws for Mounting Ears
- (1) Back Bracket
- (4) Back Bracket Screws
- (4) Rubber Feet
- (1) Power Cord
In The ARO-300 Box
- (1) ARO-300 WiFi Audio Router
- (1) 5V (2A) Power Supply
- (1) 3.5mm to RCA Cable (4 feet)
- (1) Micro USB Cable (5 feet)
SKU: XJ-300ST (SPECIAL)
