Shop
Showing 217–240 of 269 results
-
Home Audio, Subwoofers, Supernova Series
Supernova MKVII-15Sealed
Specifications
- Sealed front firing design
- 1200 Watts dynamic power
- 600 Watts continuous power
- Earthquake class J amplifier
- Frequency Response: 14-120 Hz
- Manual on/off switch
- Auto on/off switch
- IR input
- Crossover with bypass switch
- Subsonic filter
- Phase delay
- Phase switch
- Manual channel 1 and 2 gain adjustment
- Full and advanced room correction
- RCA inputs
- Balanced XLR inputs
- High gloss piano black lacquer finish
SKU: MKVII-15SEALED -
DJ / Pro Audio, Home Audio, Open Box, Open Box
SWAT-2.4X (Open-Box)
Features
- Two types of inputs supporting microphones and stereo
- Supports single source to mass broadcast
- Additional high level input 0.5V–17V RMS for direct connection to amplifier (hooks up just like a regular speaker)
- USB connection supports power and audio source (source device must support analog 2 pin USB audio output)
- Digital transmission
- Frequency: 2400–2528MHz
- HDCD transmission grade
- Low power consumption
- Audio muting function when receiving weak or no signal
- Auto channel scanning function
Applications
- Audio transmission in a large room (DJ)
- Outdoor speakers (BBQ, patio, pool)
- Wireless audio transmission for surveillance
- Paging System
- Wireless microphones or loudspeakers
- iPod, sound card, CD, DVD, MP3, smart phones players or other music players
- Wireless headphones
- Ambient music (in offices, hospitals, waiting rooms)
Specifications
- 2.4Ghz
- Channel Selections: 30 Channels
- Work Voltage: 3.6–6VDC
- Transmitter Work Current: Max 120 mA
- Receiver Work Current: Max 35 mA
- Operation Temperature: 5–149 °F (-5–65 °C)
- Practical Mode Freq. Range: 2400–2528 MHz
- Transmitter Modulation: GFSK
- Band Rate: 2 Mbps
- Ferquency Stability: ±156kHz
- Practical Working Frequency: 2400–2428 MHz
- Channel Space: 4 MHz
- RF Range: Up to 150 feet (45 meters) of open field
- Trnsmitter TX Power: 0–20 dBm
- Receiver RX Sensativity: 90 dBm
- Transmitter Input Level: Max 1.0 Vrms
- Transmitter Input Impedance: 10 kOhm
- Transmitter Input Interface: Mic & High Level Audio
- Receiver Stereo Output Level 1: 30mW RL = 32 Ohms
- Receiver Stereo Output Level 2: 50mW RL = 16 Ohms
- Receiver Output Impedance: 1 kOhm
- In/Out Gain Ratio: 1:1
- Frequency Response: 20Hz–20kHz (±1dB)
- Latency: <0.5ms
- Sampling Ratio: 64k @ 16 bit x 2
- S/N Ratio: 95dB
- THD: 0.3% @ 1kHz
- Dynamic Range: 90dB
- Channel Separation: 70dB
In The Box
- One (1) transmitter
- One (1) receiver
- One (1) 3.5mm to 3.5mm cable
- One (1) high level input plug
- Two (2) 3.5mm ro RCA cables
- Two (2) 100–240V power supplies
PLEASE NOTE: This item is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: SWAT-2.4X (B-Stock) -
Accessories, Accessories, Accessories, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/Wireless
SWAT-2.4X Wireless Audio Transceiver
Accessories, Accessories, Accessories, DJ / Pro Audio, Gaming AR/VR Audio, Home Audio, WiFi/WirelessSWAT-2.4X Wireless Audio Transceiver
The Earthquake SWAT-2.4X stereo wireless audio transceiver allows you to wirelessly play audio material from your audio source player to any speaker. Hardwiring your speakers to your sound source is costly and time-consuming. The SWAT-2.4X makes installation a snap and does not compromise sound quality for convenience. It is extremely versatile and perfect for apartments or outdoor settings. It even has microphone capability, so you can transmit voice as well.
SKU: SWAT-2.4X -
Accessories, DJ / Pro Audio, Home Audio, WiFi/Wireless
SWAT-RECX
Features
- Channels: 20
- Two types of inputs supporting microphones and stereo
- Additional High level input 0.5V to 17V RMS for direct connection to amplifier (hooks up just like a regular speaker)
- USB connection supports power and audio source (source device must support analog 2 pin USB audio output)
- Digital transmission
- Highest sampling ratios: 64k @ 16 bit x 2, frequency response 5 to 20.000Hz;
- Frequency: 2400-2528MHz
- HDCD transmission grade
- Lowest latency (<0.5ms)
- Low power consumption
- Audio muting function when receiving weak signal or no signal
- Auto channel scanning function
Specifications
- 2.4Ghz
- Channel Selections: 30 Channels
- Work Voltage: 3.6–6VDC
- Receiver Work Current: Max 35 mA
- Operation Temperature: 5–149 °F (-5–65 °C)
- Practical Mode Freq. Range: 2400–2528 MHz
- Band Rate: 2 Mbps
- Frequency Stability: ±156kHz
- Practical Working Frequency: 2400–2428 MHz
- Channel Space: 4 MHz
- RF Range: Up to 150 feet (45 meters) of open field
- Receiver RX Sensitivity: 90 dBm
- Receiver Stereo Output Level 1: 30mW RL = 32 Ohms
- Receiver Stereo Output Level 2: 50mW RL = 16 Ohms
- Receiver Output Impedance: 1 kOhm
- In/Out Gain Ratio: 1:1
- Frequency Response: 20Hz–20kHz (±1dB)
- Latency: <0.5ms
- Sampling Ratio: 64k @ 16 bit x 2
- S/N Ratio: 95dB
- THD: 0.3% @ 1kHz
- Dynamic Range: 90dB
- Channel Separation: 70dB
Applications
- Audio transmission in a large room (DJ)
- Outdoor speakers (BBQ, Patio, Pool)
- Wireless audio transmission for surveillance
- Paging System
- Wireless microphones or loudspeakers
- iPod, sound card, CD, DVD, MP3, smart phones players or other music players
- Wireless headphones
- Ambient music (in offices, hospitals, waiting rooms)
In The Box
- One (1) receiver
- One (1) 3.5mm to 3.5mm cable
- One (1) 3.5mm to RCA cables
- One (1) 100–240V power supplies
Other Information
Model: SWAT-RECX
EAN: 0689759000662
Priced and sold by the setSKU: SWAT-RECX -
Car Audio, Open Box
SWS-10X Shallow Subwoofer (Open-Box)
Features
- 10″ high-performance shallow subwoofer
- Low profile mount for placement anywhere
- Inverted style cone design for a maximum excursion in shallow mount applications
- High-temperature voice coil with heat-sink attachment
- NOMEX/ROMEX spider assembly
- Protected by multiple U.S. patents
- Aluminum bobbin
Specifications
- Power handling: 200 Watts RMS / 400 Watts MAX
- Impedance: 4-Ohm
- Mounting depth: 2.67″ (68mm)
- Cut-out hole diameter: 9″ (228mm)
- Voice Coil Diameter: 2″ (50.8mm)
- Weight: 11 lbs
- Sensitivity: 88.2dB
Parameters
- Revc: 3.500Ohm
- Fs: 34.289Hz
- Sd: 33.000msqM
- BL: 14.197TM
- Qms: 4.038
- Qes: 0.461
- Qts: 0.414
- No: 0.00229%
- SPLo: 85.6dB
- Vas: 954.631mcuFt
- Cms: 174.809uM/N
- Krm: 136.839mOhm
- Erm: 1.215
- Mms: 123.245g
- Mmd: 119.798mKg
- Kxm: 17.238mOhm
- Exm: 0.697
- Xmax: 0.26 in (6.75mm)
- Xmech: 1.10 in (28mm)
- Xmax measured in one direction)
Recommended Sealed Internal Volume
- Minimum: 0.38cu.ft. (10.76Ltr)
- Maximum: 0.75cu.ft. (21.23Ltr)
- Assuming 3/4″ MDF is being used
Other Information
Model: SWS-10X
UPC: 0168975910196
Priced and sold by the piecePlease Note: This is a B-Stock item that has been refurbished and tested. Minor signs of use may be cosmetically visible.
SKU: SWS-10X (B-Stock) -
Car Audio, Open Box
SWS-12X (Open-Box)
SWS – The OG Shallow Woofer Design
The SWS-12X is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 12-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability.
SKU: SWS-12X (B-Stock) -
Car Audio, Subwoofers
SWS-12X Shallow Woofer System
SWS – The OG Shallow Woofer Design
The SWS-12X is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 12-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability.
SKU: SWS-12X -
Car Audio, Subwoofers
SWS-6.5X Shallow Subwoofer
Generate Deep Bass From the Shallowest Space
The SWS-6.5X Shallow Woofer by Earthquake Sound is a 6.5-inch low-profile subwoofer that provides deep bass in tight spaces. Its patented inverted design and ribbed cone enhance excursion, allowing for versatile placement while minimizing mounting depth and improving sound quality.
SKU: SWS-6.5X -
Car Audio, Subwoofers
SWS-8X Shallow Woofer System
SWS – The OG Shallow Woofer Design
The SWS-8X is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 8-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability.
SKU: SWS-8X -
Car Audio, Subwoofers
SWS-8Xi Shallow Woofer System
SWS – The OG Shallow Woofer Design
The SWS-8Xi is part of the SWS series of low-profile shallow-mounting subwoofers, initially invented by Earthquake Sound Corporation to deliver massive bass from a shallow space. With a patented inverted style and ribbed cone design, this 8-inch subwoofer maximizes excursion in shallow mount applications, allowing for placement in almost any location. The innovative design moves suspension components to the side, reducing mounting depth while enhancing sound capability.
SKU: SWS-8Xi -
Car Audio, Coaxial Speakers
T46 Coaxial Speaker
Features
- Low mass poly injection cone bodies that deliver precision sound quality
- High flow ventilation stamped steel basket design
- Large butyl rubber surround
- 12db/Octave crossover
- Nomex / Romex spider assemblies for linear travel & durability
- Shallow mount designs for American & foreign cars and trucks
- Over 1″ (30mm) Mylar super tweeters that delivers exceptionally high frequencies for all ranges of music
- Cool graphite scheme for easier color matching
Specifications
- Size: 4×6″ 2-Way Coaxial Speaker
- Power Handling: 300 Watts MAX
- Frequency Response: 100Hz–20kHz
- Sensitivity: 87dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Diameter: 2-7/8″ x 4-3/4″ (73mm x 121mm)
- Mounting Depth: 2″ (50mm)
Other Information
Model: T-46
EAN: 0168975910493
Priced and sold by the pairSKU: T46 -
Car Audio, Open Box
T46 Coaxial Speaker (B-Stock)
Features
- Low Mass Poly Injection Cone Bodies that Deliver Precision Sound Quality
- High Flow Ventilation Stamped Steel Basket Design
- Large Butyl Rubber Surround
- 12dB/Octave crossover
- NOMEX / ROMEX Spider Assemblies For Linear Travel & Durability
- Shallow Mount Designs For American & Foreign Cars And Trucks
- Over 1″ (30mm) Mylar Super Tweeters that Delivers Exceptionally High Frequencies for All Ranges of Music
- Cool Graphite Scheme For Easier Color Matching
Specifications
- Size: 4×6″ 2-Way Coaxial Speaker
- Power Handling: 300 Watts MAX
- Frequency Response: 100Hz–20kHz
- Sensitivity: 87dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Diameter: 2-7/8″ x 4-3/4″ (73mm x 121mm)
- Mounting Depth: 2″ (50mm)
Other Information
Model: T-46 (B-Stock)
EAN: 0168975910493
Priced and sold by the pairSKU: T46 (B-Stock) -
-
Center Channel Speakers, High Fidelity Speakers, Home Audio
Theia Center Channel Speaker
The Earthquake Titan Theia center channel speaker was designed to perfectly complement the Telesto and Tigris floor-standing speakers. It is also ideally suited as an upgrade in other high-quality systems needing a true full-range center speaker. It is capable of thundering dynamics and deep lows while remaining perfectly composed, detailed, and harmonic. Very few center speakers live up to the acoustic performance of the stereo speakers they are paired with. The Theia ups the ante on performance by an order of magnitude by incorporating several advanced core Earthquake technologies.
SKU: TITAN THEIA -
Home Audio, In-Wall, In-Wall & In-Ceiling Speakers, Subwoofers
THOR IW-SUB10 In-Wall Subwoofer
Features
- Produces massive bass from a shallow place
- Down to 20Hz of non-distorted output
- Bolt-in 2×4 and 2×6 stud mounting:
- 16″ Center-to-Center positioning
- 24″ Center-to-Center positioning
- Patented 10″ SWS (Shallow Woofer System) technology
- Patented 10″ SLAPS (Symmetrically Loaded Audio Passive System) passive bass radiator
- Less than 4″ mounting depth
- Reinforced non-resonating back box assembly
- Easy Turn-N-Lock™ installation mechanism
- Standard metal mesh grille plus two custom cloth grilles included
Specifications
- Woofer: 10″ (254mm) with 2.5″ excursion
- Power Handling:
- RMS: 400 Watts
- Max: 800 Watts
- Frequency Response: 20–160Hz
- Sensitivity: 89dB@1W/1M
- Nominal Impedance: 4-Ohm
- Finish: White / Paintable, custom grille options included
Dimensions
- Overall dimensions (H x W): 28″ x 18.62″ (711mm x 473mm)
- Cut out dimensions (H x W): 24″ x 13.75″ (610mm x 349mm)
- Mounting depth: 3.75″ (95mm)
Other Information
Model: IW-SUB10
EAN: 0068975900237
Priced and sold by the pieceSKU: IW-SUB10 -
Amplifiers, Home Audio, Specials, Subwoofers, Tactile Transducers
THOR LFE Kit
Big Bass From Shallow Place With Limited Space
Earthquake’s THOR IW-SUB10 in-wall subwoofer is poised to revolutionize the in-wall speaker market segment by offering a unique sealed box design of only 3.75″ (95mm) deep. Unlike traditional in-wall subwoofers, it doesn’t load the wall cavity, making installation a breeze with minimal guesswork on the installer’s part. Furthermore, the Thor IW-SUB10 in-wall subwoofer boasts a 20Hz response with exceptional performance complemented by a discreet, flexible design that blends seamlessly into any home audio setup. The package includes a metal grille and frames for custom fabric grilles, which enables perfect integration with no extra expense. This subwoofer is versatile enough to be mounted up into the ceiling or even on the floor, making it an excellent choice for anyone seeking thundering bass with limited space. Pair the IW-SUB10 with the highly efficient XJ-300ST, and you have a cool-running rock-solid modular amplifier with twice the output power of most amplifiers its size. Get massive, fast bass from a limited space with the XJ-300ST and IW-SUB10 LFE kit.
Note: THOW LFE Kit comes with one XJ-300ST amplifier and one IW-SUB10 subwoofer.
SKU: THOR-LFE-KIT -
Home Audio, Open Box
Titan Hestia LCR (Open-Box)
Features
- Two 1″ TWR1 Wideband silk dome tweeters
- Internal aerodynamic motor (minimal turbulence)
- High pass 18dB/octave filter @ 4kHz
- Full range drivers with 4” Kevlar cones + Piston-Max patented technology
- XLT (eXtra Long Throw) woofer geometry
- AASD (Acoustic Array System Design) technology for controlled coverage
- Vari-Mount installation system for vertical/horizontal placement
- Gold plated push terminals
- Priced and sold by the piece
Specifications
- Frequency: 30Hz-35KHz
- Sensitivity: 89dB @ 1W/1M
- Nominal Impedance: 8-Ohm
- Power Handling: 300 Watts MAX
- Finish: Piano Black
Dimensions
- Net Weight: 13.53 lbs (6.14 kgs)
- HxWxD: 7.25″ (184mm) x 31.5″ (800mm) x 3.30″ (84mm)
SKU: Hestia (B-Stock) -
Floorstanding Speakers, High Fidelity Speakers, Home Audio
Titan Telesto Tower Speaker
Specifications
- Frequency Response: 25Hz—40kHz
- Sensitivity: 94dB+/-3dB
- Nominal Impedance: 4 Ohms
- Crossover frequency: 350Hz, 3.2kHz, 10kHz
- Recommended amplifier power: 100 WRMS and up to 500 WRMS
- Dimensions (Height, Width, Depth): 50.5″/1282mm x 7.7″/195mm x 18.3″/465mm
- Net weight: 68.3lbs/31kgs
- Exterior finish: Fine high gloss 3mm black lacquer paint
- T1:
1” silk dome, NEO, super tweeter
Frequency range: 3kHz—35kHz
Fo=2.1kHz - M2:
1.25” silk dome, compression tweeter, phase correction, horn loaded
Frequency range: 1.4kHz—10kHz
Fo=1.25kHz - M4: Dual 4” Kevlar midrange, Long Excursion
Frequency range: 100Hz—2kHz
Fo=130Hz - EQ-8XLT:
8” black fiberglass cone side woofer
Frequency range: 30Hz—150Hz
Other Information
Model: Titan Telesto
EAN: 0068975900138
Priced and sold by the pairSKU: Telesto -
Home Audio, Open Box
Titan Telesto Tower Speaker (Open Box)
Specifications
- Frequency Response: 25Hz—40kHz
- Sensitivity: 94dB+/-3dB
- Nominal Impedance: 4 Ohms
- Crossover frequency: 350Hz, 3.2kHz, 10kHz
- Recommended amplifier power: 100 WRMS and up to 500 WRMS
- Dimensions (Height, Width, Depth): 50.5″/1282mm x 7.7″/195mm x 18.3″/465mm
- Net weight: 68.3lbs/31kgs
- Exterior finish: Fine high gloss 3mm black lacquer paint
- T1:
1” silk dome, NEO, super tweeter
Frequency range: 3kHz—35kHz
Fo=2.1kHz - M2:
1.25” silk dome, compression tweeter, phase correction, horn loaded
Frequency range: 1.4kHz—10kHz
Fo=1.25kHz - M4: Dual 4” Kevlar midrange, Long Excursion
Frequency range: 100Hz—2kHz
Fo=130Hz - EQ-8XLT:
8” black fiberglass cone side woofer
Frequency range: 30Hz—150Hz
Other Information
Model: Titan Telesto
EAN: 0068975900138
Priced and sold by the pairSKU: Telesto-Open Box -
Floorstanding Speakers, High Fidelity Speakers, Home Audio
Titan Tigris Tower Speaker
Like its baby brother Telesto, the Titan Tigris tower speaker descends from the reference speaker Titan Tethys. It is a dominant and striking evolution of the uncompromising Titan series.
Tigris results from five years of intensive development and the natural continuation of the research that began nearly 25 years ago with Joseph Sahyoun’s dream of the perfect loudspeaker. During the development of the original Titan, it was recognized that the combination of individually uncompromising units failed to achieve the homogeneous perfection and true-to-life reproduction Joseph so ardently desired.
The focus was broadened from optimizing individual technical details to approaching the design as a complex, intrinsic organism. A new generation of devices and components had to be developed. Organically, In-Circuit became the new paradigm for Earthquake. The drive units were developed in parallel and designed to work harmoniously together. Mimicking nature’s organic growth as closely as possible, the drive units grew up together instead of being introduced to each other as adult strangers attempting to connect through a complex and diluting crossover network.
This new approach, combined with Earthquake’s high-tech development and production facilities, offers a new degree of differentiation. Nearly all traditional speakers are assembled by manufacturers purchasing various devices from different suppliers. These individual units are combined into a whole using complex and expensive crossover designs that seek to compensate for and offset the drive units’ other characteristics.
Titan Tigris loudspeakers differentiate themselves by being engineered to work together from initial conception. This improves all design aspects, making the whole greater than the sum of its parts.
The result is a loudspeaker with constant energy dispersion. A speaker with no tonal shift regardless of volume. A speaker where detail is not achieved at the expense of dynamics. Titan Series straight-through, wide-open performance set a new standard for loudspeaker design.
SKU: Tigris -
Car Audio, Open Box
TNT Series T693X (B-Stock)
Features
- 6″x9″ 3-way Performance Series Component System
- Low Mass Poly Injection Cone Bodies that Delivers Precision Sound Quality
- High Flow Ventilation Stamped Steel Basket Design
- Large Butyl Rubber Surround for accurate bass output
- NOMEX / ROMEX Spider Assemblies For Linear Travel & Durability
- Shallow mount design for more flexible installations
- 1-3/16″ (30mm) Mylar Dome super tweeter with neodymium motor
- 2″ (66mm) Mylar mid-range tweeter
- Speaker grilles included
- Cool Graphite Scheme For Easier Color Matching
Specifications
- 6×9″ 3-Way TNT Series Coaxial
- 600 Watts MAX
- Frequency Response: 20Hz – 22kHz
- Sensitivity: 91dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Depth: 3-7/16″
SKU: T693X (B-Stock) -
Car Audio, Coaxial Speakers
TNT T57 Coaxial Speaker
Features
- 5×7″ 2-way full-range coaxial speaker
- Low mass poly injection cone body provides precision sound quality
- Mylar dome super tweeter provides exceptionally high frequencies for all ranges of music
- High flow ventilation stamped steel basket design
- Large butyl rubber surround
- 12db/octave crossover
- Nomex / Romex spider assemblies for linear travel & durability
- Shallow mount designs for American & foreign vehicles
- Graphite scheme for easier color matching
Specifications
- Woofer Size: 5×7″
- Super Tweeter: 1.18″ (30mm)
- 400 Watts MAX
- Frequency Response: 50Hz–20kHz
- Sensitivity: 87dB @ 1W/1M
- Nominal Impedance: 4-Ohm
- Mounting Depth: 2.28″ (58mm)
- Mounting Diameter: 4.56″ x 8.03″ (116mm x 204mm)
Other Information
Model: T57
UPC: 0168975910585
Priced and sold by the pairSKU: T57
