Search results: “magma”
Showing all 9 results
-
Car Audio, Enclosures
RB1-MAGMA-15PP
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Pump-12 passive radiator for extended low frequency response and maximum output.
- For durability and chipping resistance, black spray-on polyurethane material is applied to all enclosures.
- Available with 15-inch loaded driver.
- MAGMA – MAGMA-15X
- Rectangular-shaped enclosure design.
- Pre-installed gold-plated wire terminals included.
Dimensions
Model: RB1-MAGMA-15PP
- External H x W x D: 19.00ʺ (482.56mm) x 24.92ʺ (633.02mm) x 17.00ʺ (431.80mm)
- Cutout Diameter: 14.17ʺ (360.00mm)
- Port Inlet H x W: 12.75ʺ (323.85mm) x 5.50ʺ (139.70mm)
SKU: RB1-MAGMA-15PP -
Car Audio, Enclosures
RB1-MAGMA-12PP
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Pump-12 passive radiator for extended low frequency response and maximum output.
- For durability and chipping resistance, black spray-on polyurethane material is applied to all enclosures.
- Available with 12-inch loaded driver.
- MAGMA – MAGMA-12X
- Rectangular-shaped enclosure design.
- Pre-installed gold-plated wire terminals are included.
Dimensions
Model: RB1-MAGMA-12PP
- External H x W x D: 16.31ʺ (414.24mm) x 22.17ʺ (563.02mm) x 17.00ʺ (431.80mm)
- Cutout Diameter: 11.44ʺ (290.50mm)
- Port Inlet H x W: 12.75ʺ (323.85mm) x 5.50ʺ (139.70mm)
SKU: RB1-MAGMA-12PP -
Car Audio, Open Box
Magma-12X (Open-Box)
Specifications
- SWE 12″ Subwoofer
- 1000 Watt Max
- 500 Watt RMS
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor in with the cold air and out with the hot air
- Super thick motor to assist long excursion – 2” thick
- PBP (Perforated Back Plate) that circulate cold air into the gap
SKU: Magma-12X (B-Stock) -
Car Audio, Open Box
Magma-15X (Open-Box)
Specifications
- SWE 15″ Subwoofer
- 1500 Watt Max
- 700 Watt RMS
- 4 Ohm
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor in with the cold air and out with the hot air
- Super thick motor to assist long excursion – 2” thick
- PBP (Perforated Back Plate) that circulate cold air into the gap
SKU: Magma-15X (B-Stock) -
Car Audio, Subwoofers
MAGMA-15X
Features
- Super wide edge surround for long excursion
- Poly-ether draw surround with thick single layer for longer life and max excursion
- Edge reinforced inverted dust cap for lower cone distortion
- 3mm stiff non-pressed fiber cone for faster response and lighter mass
- MAX OD spider for more spider area and more linear spring constant
- Patented TCT (Turbo Cooled Technology) forced cooled motor
- High gauss 2″ thick motor system of strontium cobalt to assist long excursion
- Bump back plate for higher excursion
- PBP (Perforated Back Plate) that circulates cold air into the gap
- Back plate holes to create massive cooling in the gap
- Voice coil of heavy gauge oxygen-free copper (OFC) wire
- Aluminum voice coil former
- Mil-spec coil coating
- Spring loaded push on terminals
Specifications
- Driver Size 15″
- Power Handling:
- 700 WRMS
- 2000 Watts MAX
- Impedance: Dual 4-Ohm
- Voice Coil Diameter: 3″ (76.2mm)
- Sensitivity: 89dB
Dimensions
- Cutout Diameter: 14″ (357mm)
- Mounting Depth: 8″ (203mm)
- Motor Diameter: 8.93″ (227mm)
Parameters
- Fs: 20.2Hz
- Sd: 137.95 in² / 0.089 m²
- Qes: 0.3219
- Qms: 4.7850
- Qts: 0.3017
- Revc: 8 Ohm
- Vas: 210.14 L / 7.4210 ft3
Other Information
Model: MAGMA-15X
EAN: 0168975910332
Priced and sold by the pieceSKU: MAGMA-15X -
Car Audio, DJ / Pro Audio, Subwoofers, Subwoofers
MAGMA-12X
Upon its release, Earthquake’s MAGMA-X drivers toppled DB drag records one by one like a bowling ball rolling through the lane. The MAGMA-12X effectively converts electrical energy into physical movement with a mechanical construction of superior quality, evident in the almost absurd over-building of all components.
This is further enhanced by adding TCT (Turbine Cooled Transducer) technology. TCT is a patented earthquake-exclusive technology that implements a fixed turbine vane impeller in the magnet gap. It forces the drawn-in air to rotate in a vortex pattern against the aluminum voice coil, exponentially increasing the surface contact of the cooling air. The result is a 3db increase in sound output at rated power compared to the same transducer without TCT.
The intelligent MAGMA-X design with an overbuilt motor system results in a device that is always electrically controlled by the amplifier. The strong reactive electromagnetic coupling ensures the woofer remains compression-free and will not dampen itself mechanically. The high edge surround combined with the super spider allows for huge excursion. The driver’s electrically controlled and mechanically unhampered movement results in a transient response with previously unheard-of dynamic capability.
SKU: MAGMA-12X -
Car Audio, Enclosures
RB1-DBXI-15PP
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Pump-12 passive radiator for extended low frequency response and maximum output.
- For durability and chipping resistance, black spray-on polyurethane material is applied to all enclosures.
- Available with 15-inch loaded driver.
- DBXI – DBXI-15D
- Rectangular-shaped enclosure design.
- Pre-installed gold-plated wire terminals are included.
Dimensions
Model: RB1-DBXI-15PP
- External H x W x D: 19.00ʺ (482.56mm) x 24.92ʺ (633.02mm) x 17.00ʺ (431.80mm)
- Cutout Diameter: 14.17ʺ (360.00mm)
- Port Inlet H x W: 12.75ʺ (323.85mm) x 5.50ʺ (139.70mm)
SKU: RB1-DBXI-15PP -
Car Audio, Enclosures
RB1-DBXI-12PP
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Pump-12 passive radiator for extended low frequency response and maximum output.
- For durability and chipping resistance, black spray-on polyurethane material is applied to all enclosures.
- DBXI – DBXI-12D
- Rectangular-shaped enclosure design.
- Pre-installed gold plated wire terminals included.
Dimensions
Model: RB1-DBXI-12PP
- External H x W x D: 16.31ʺ (414.24mm) x 22.17ʺ (563.02mm) x 17.00ʺ (431.80mm)
- Cutout Diameter: 11.44ʺ (290.50mm)
- Port Inlet H x W: 12.75ʺ (323.85mm) x 5.50ʺ (139.70mm)
SKU: RB1-DBXI-12PP -
Car Audio, Enclosures
WB1 Pump Passive Enclosure
Features
- Constructed from 3/4ʺ particle board with all joints securely glued and fastened.
- Precision cut and grooved with CNC machining to ensure quality and control.
- Preinstalled Pump-12 Passive Radiator for extended low frequency response and maximum output.
- Black spray-on polyurethane bed liner material is applied to all enclosures for durability and chipping resistance.
- Available with single loaded 12 inch driver.
- DBXI – DBXI-12D
- MAGMA – MAGMA-12X
- Wedge-shaped enclosure design.
- Pre-installed gold-plated wire terminals included.
SKU: n/a